- Joined
- Mar 30, 2014
- Posts
- 6,092
- Reaction score
- 4,173
- Location
- SC
- Ram Year
- 2022 Ram 1500 (5th Gen)
- Engine
- 5.7L
I Just want to see this done if possible as long as we have someone with the right truck to figure it out. $ is definitely not required.
It is absolutely insane to me that so much of the wiring is in your truck except this one last segment to the radio. If I can get the pins in hand for both ends, I can put them on the cable I have in 10mins. Easy.
EDIT: Here are the female connector sockets we need to see about sourcing a vendor for that's not too $$...
Inline-Body/IP (foot Well) - "mopar pn's"
68316923AA - 20ga (1.5mm sockets)
or 68316925AA - 18ga
(there is probably a Tyco pn for the above female sockets that is cheaper if I can get someone with TechAuthority access (tech or parts clerk) to tell me what the Manufacturer PN is for the connector (Tyco or Yazaki. I hope it's not Yazaki).
Radio/C1 pins (Tyco/TE Connectivity Pn's)
638551-3 (0.64mm sockets) @ Mouser for $0.10 ea
Did some digging through the Yazaki YESC catalog and I think I may have identified the 43 pin "Inline-Body/IP" connector and it's sockets (awaiting confirmation, but fairly certain):
- Female Connector Housing (Polarity A), Yazaki PN: 7283-4190-30
- Female 1.5mm Sockets (22-20Awg), Yazaki PN: 7116-4100-02 (Au: -08) or 7116-4780-02 (Sn)
- Female 1.5mm Sockets (18-16Awg), Yazaki PN: 7116-4101-02 (Au: -08) or 7116-4781-02 (Sn)
Looking back over my Jeepguy Harness notes/schematic, 7116-4100-02 is the same pn as the i315 footwell connector for the 1500's.
Bad news is that this part is $23-$30 per pin from Mopar. I put out a quote request at a possible affordable vendor to see about getting 5-10 or so of them. We will see.
Also updated previous post and with the above (and post 10).
Post 912 and Up - Notes about DannyMk2's 2015 Ram 2500 missing camera wiring at "Inline-Body/IP" connector (vs i315).
Originally began around Post 694 (another good reference for verifying if you have existing wiring or not).
Attachments
Last edited: