Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
No one that has upgraded to a 13-17 8.4 radio that didn't come in their truck from the factory has been allowed by FCA to use their uConnect service (except 2 or 3 people with the needed FCA connections to get it added at the higher WiC level). Adding the Ra4 sales code doesn't help.Has anyone get Uconnect working yet?
Sent from my iPad using Tapatalk Pro
Alright folks, finally got the 2018 jumpseat insert and took a break from unpacking after moving to get the 18 Ram Dual USB port hub installed to use with the 18 Ram UAQ radio that's already in my 13 Ram (replaced the UAS).
Parts:
68328704AC - 18 Ram MEDIA HUB: $99
https://parts.allmoparparts.com/oem-parts/mopar-media-hub-hub-68328704ac
68376066AA - 18 Ram Jumpseat Lid/Storage Bin (black) : $95
https://parts.allmoparparts.com/oem-parts/mopar-lid-storage-bin-68376066aa
Pictures:
Noteworthy EDIT:
Without changing the BCM setting to enable the 2nd USB hub port, I can confirm the following ...
- Left USB port works for both USB Media/thumbdrive and Android Auto (& CarPlay likely).
- Right USB port works with Android Auto (& CarPlay likely), but not for USB media.
Install videos (3):
Part 1 -
Part 2 -
Part 3 -
http://www.ramforum.com/index.php?posts/1458159]M² Mods.
Just got my 2018 insert and media hub installed! Thanks for sharing the videos!
Sent from my iPad using Tapatalk
Are you talking about the storage bin? If so, it's two posts above yours.Does anyone have the part number to order a new housing that would hold the media (usb) / tray from 2018 ? I have a 2017 Ram 1500 but I pulling out the old usb media hub and Broke the usb housing that / tray part while trying to pull it out.
Console vs jumpseat?Yes, but the one in my truck doesn’t have the three cups holders?
If you have the non-jump seat center console, it has been discussed a few posts up that the insert is currently not avaliable individually. You have to purchase the entire console and lid for over $500. The insert may eventually have its own part number.Yes, but the one in my truck doesn’t have the three cups holders?
I got the new hub and insert installed. Both USB ports work fine, but can't seem to get the aux cable to work (may just be my cable)...any thoughts?
View attachment 125414
I got it from Infotainment....Did you get the media harness from M2Mods, Infotainment, or build your own?
... but ours does. [emoji14]Last I heard their media hub harness doesn’t have the aux wiring in it. It’s just power and ground to make the hub work.
Sent from my iPhone using Tapatalk
You've got enough posts to list in the for sale section. Compare prices on eBay, and prior for sale posts and set your own. Asking this question in the forum is friend upon though (ie fishing for a pre-sale). You can always take offers too.How much are you guys getting for you 8.4AN's and where would the best place to sell it be?
Sent from my BBB100-1 using Tapatalk