I’ve a 17 express with regular headlights. I’d like led and/or projector lights. I don’t know what option is best and I don’t want to spend $450 on each side. Thanks.
Should I get the shock with spring Bilstein or can I just put a Bilstein shock inside the factory spring? What makes the Bilstein better then the RC leveling kit?
Thanks.
@NoR125 I only bought the hood latch with the plug since I had the latch plug already wired there. I then ran the wire to the BCM and the ground wire under hood. I do have something in the menu on remote start but I don't recall what it said.
I finally got my install done. The truck doesn't start. I click the start button on fob twice and I only get the dash/instrument cluster to light up. That tells me it is at least recognizing the remote start button? I was worried I didn't have the RF hub as mentioned in this thread. I already...
I next made a harness with two wires
One wire went from pin 6 of the mating connector under the fuse box and went to a lug that attached to the ground bolt right next to the fuse box (http://connectors.dcctools.com/details.htm?id=217744)
Second wire went from pin 5 of the mating connector...
Thanks Moab. I do have the wires from the hood switch into the PCM. When I separated the connector, there were no pins on the body side of pins 5/6. I assume in need a harness to go from 5/6 to the BCM?
In reading the install instructions from the mopar kit, it says if you have the factory...
I'm lost here guys. I have a 2017 Xpress that had the wire/plug near the factory hood latch. I replaced the hood latch with the remote start type and plugged in the connector. I got the ebay fob cover for remote start and installed that in the fob. I went to the dealer today and they did the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.