I would try hand calculating it and then also resetting the fuel mileage on the dash. Have you had this truck since new and it just started or did you just get the truck recently?
That is my next step is to check wiring and grounds. I honestly haven't been able to devote the time to it that I need. But hopefully this spring I will be able yo diagnose it a little more. I was able yo return all but one of the pieces and I've replaced it myself each time, so I'm only out...
I've replaced the HCU twice and the ABS module three times. I've performed the initialization using AlfaOBD and the light will not go off. It has been like this over a year now.
I have been battling this since last March. I have replaced tge HCU once, light was still on. Replaced the ABS module 3 times and light is still on. Last time I bought a known working HCU/ABS from a used vehicle and it still didn't work. Each time I went through the whole initialization...
Those are the ones the site populated for low beams when I entered the trucks info into the site.
There are some specific to the fogs on the Auxito web site. I used those as mentioned, but the ones they recommended were the wrong size. That's why I would pull a fog bulb and verify before...
I do not have the auto high beam. But I got my set from Amazon.
AUXITO 9005 LED Bulbs, Mini Sized, CanBus Ready, 80W 16,000 Lumens 500% Brighter 9005 HB3 LED Light Bulb Conversion Kit, 6500K Xenon White, Pack of 2 https://a.co/d/eP4PrOj
I have the projectors in mine. I used Auxito 9005; 80w and 16,000 lumen, 6500k color. They actually fit under the dust cover. My truck took the H10 fog lights. It told me the wrong ones on the website. I'd pull a fog and verify before ordering.
I have Auxito leds in all 3 of my vehicles including fogs. They are great. Only issue is my Dart shows a low beam out indicator even with the resistors installed. I live with it for the high output. I do know in my Ram though I couldn't fit the 20,000 lumen. Had to go with the 16,000 lumens.
I have towed my 14k lbs 5th wheel several times while my ABS hasn't worked. Just play it safe and keep your distance behind others.
I've replaced my module 3 times and it still hasn't fixed the issue. Used AlfaOBD each time to initiate it as well and nothing fixes mine. I've pretty much...
I have a set of 4.10 gears, front and rear, from my 2016 2500. They have about 35,000 miles and were removed when my 4.88s were installed. I asked the shop owner about their condition to resell and he said they still look new. I just don't need them anymore and wanted to check if any...
It could be something like that. I ordered another new ABS control module so hopefully I can get it working this time. It's very frustrating to eat the least! Glad you got your's working because me has been a pain.
I have fought this issue for over a month now. I've replaced both the Hydraulic Control Unit and the ABS module with new parts and nothing has solved the issue. Two different dealerships and $300 in diagnostic fees later and one says it is a bad HCU, one says it is a bad ABS module. Both are...
I got the warning light on my 2016 last week. Ordered the new HCU and will be replacing it hopefully within the next week. I found the part from a dealer for about $260. I've read you don't have to replace both pieces, and some who did replace both had more issues than those who simply...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.