2013 2500 35" w/ 2" level

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SalmonKiller

Junior Member
Joined
Dec 11, 2017
Posts
9
Reaction score
0
Location
washington
Ram Year
2013
Engine
6.7
I have a 2013 6.7 2500.

2" level kit.

XD addict wheel 20x9 w/ +18 offset.

I was wondering if i will have rubbing issues if i get some 35 12.5 20 NItto ridge graplers?
 

UpInSm0kE

Member
Joined
Sep 12, 2017
Posts
54
Reaction score
18
Ram Year
2019 Ram 2500 Tradesman
Engine
6.7 Cummins
You should be fine, typically you would only rub if you were using the Stock OEM Rims with a +54 offset. I ran 295/70r18 on +18 and 285/75r18 (35x11.50) with a 2" level and never got close to rubbing. I am running 18" XD Monster Rims with a +18 offset as well.
 

Saugie53

Junior Member
Joined
Oct 9, 2017
Posts
6
Reaction score
4
Location
North Kingstown, Rhode Island
Ram Year
2013
Engine
5.7
Just putting my 2 cents in...you might wanna try and do a little more research...i did the same thing on my 2013 2500 everyone was saying 35's fit fine with no rubbing...I bought the oem black 20" wheels and went with 285/65/r20 goodyear wrangler duratrac tires just to be safe and sure enough i have a little bit of rubbing...its only on full lock each way the insides of the tires rub against the radius arms...apparently in 2013 ram changed the suspension but only on the 3500's they didnt change the suspension on the 2500's until 2014 so people saying they fit on their 2014 and newer 2500's will be different then yours...its not bad rubbing and i can deal with it...i have actually learned to stop right before i get to full lock so it doesnt bother me that much and usually if they do rub i am driving very slowly so nothing happens...just didnt want you to go with a set of tires based off what other people with newer trucks were saying fit theirs like i did...i mean with a 2" level and the fact that you arent going with the stock wheels which have a horrible offset might be enough to make a difference
 

UpInSm0kE

Member
Joined
Sep 12, 2017
Posts
54
Reaction score
18
Ram Year
2019 Ram 2500 Tradesman
Engine
6.7 Cummins
He stated that he is using aftermarket +18 offset not the OEM Wheels. The OEM 20" are offset +54 which will rub if you go to wide but with +18 offset aftermarket he should have no issues.

I'm surprised you rub with a 285 on stock rims. I had stock rims with a 285 before my Monster's and I never rubbed at full lock. Mine measured (34.8x11.2)......
 
Last edited:

MADDOG

Out Exploring Arizona
Supporting Member
Military
Joined
Dec 26, 2011
Posts
14,444
Reaction score
9,884
Location
Arizona
You should be fine. I did XD Addict +18mm offset wheels with 35's & a 2" level on my 2014, Walker Evans 504 Legacy +12mm offset wheels with 35's & a 2.5" level on my 2017. No rubs ever.
 
Top