Mictuning LED H11 Lowbeams

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

MarshRam

Senior Member
Joined
May 24, 2017
Posts
2,209
Reaction score
1,414
Location
Florida
Ram Year
2014 SLT 4x4, 2012 ST
Engine
Hemi 5.7
IMG_20171216_111222.jpg IMG_20171216_121411.jpg IMG_20171216_164315.jpg IMG_20171216_125239.jpg IMG_20171216_115811.jpg Thought I would give these a try. Was going to go with Opt7 Fluxbeam X, but not sure if I am even going to keep these quads, so decided not to invest. I really just wanted something more crisp than the stock H11's. Overall, I got what I wanted. Now the question is, will they last!

They were a tight fit, the top part of the caps did not tighten completely, so I had to seal them up. Other than that, no other complaints so far.


MICTUNING Extremely Bright H11(H8, H9) LED Headlight Bulbs, 60W 6000 Lumens Beam (6000K White, Pack of 2)

https://www.amazon.com/gp/aw/d/B01B...1513461428&sr=1&pi=AC_SX236_SY340_FMwebp_QL65IMG_20171216_164315.jpg
 

shadowhawk

Senior Member
Joined
Oct 30, 2017
Posts
3,620
Reaction score
2,813
Location
Southeast WI
Ram Year
Black metallic 2016 Sport- born 05/2016
Engine
hemi 5.7 with I2 tune
the fitment thing on the cap kinda bugs me. How did you seal them?
 
OP
OP
MarshRam

MarshRam

Senior Member
Joined
May 24, 2017
Posts
2,209
Reaction score
1,414
Location
Florida
Ram Year
2014 SLT 4x4, 2012 ST
Engine
Hemi 5.7
the fitment thing on the cap kinda bugs me. How did you seal them?


I used one band of electrical tape, got it on there nice and flush. The bottom portion of the cap sealed, the top half was sticking up a couple millimeters, just enough where you could still see the rubber o-ring seal. It was extremely close to fitting on perfect. These were installed on aftermarket quads, I didn't check to see if there would be an issue with the oem quads. I'll have to take a look at my oem and see if there is a difference.
 

Graygoose

Indecisive Car Owner
Supporting Member
Joined
Nov 21, 2011
Posts
16,824
Reaction score
31,460
Location
Oklahoma
Ram Year
Convert, for now.
Engine
small
I'd like to try them, wonder if mine being the picky '15 would give me errors.
 
OP
OP
MarshRam

MarshRam

Senior Member
Joined
May 24, 2017
Posts
2,209
Reaction score
1,414
Location
Florida
Ram Year
2014 SLT 4x4, 2012 ST
Engine
Hemi 5.7
I'd like to try them, wonder if mine being the picky '15 would give me errors.


I believe it is 15 and up that need the decoder. You can get them for these, I think it was like 10-15 bucks. The only real complaint I read was they can go bad quick for some people. We'll see, I'll update if I run into a problem.
 

Graygoose

Indecisive Car Owner
Supporting Member
Joined
Nov 21, 2011
Posts
16,824
Reaction score
31,460
Location
Oklahoma
Ram Year
Convert, for now.
Engine
small
for that price I can order a back up set. :)

Thank you.
 
OP
OP
MarshRam

MarshRam

Senior Member
Joined
May 24, 2017
Posts
2,209
Reaction score
1,414
Location
Florida
Ram Year
2014 SLT 4x4, 2012 ST
Engine
Hemi 5.7
Don’t see h11 listed on that link though.[/QUOTE

So, it appears H11 is not in stock on Amazon right now. Below is the link to the Mictuning bulbs on Amazon, but when you click on the H11 it takes you to the same bulb as the link in the OP. Then when you click on the Size option, the H11 is not there.

https://www.amazon.com/gp/aw/bs/sto...03a-a55e-0c2b69b1027b&hsa_cr_id=8750487610901

Here is another link directly to the H11 on Mictunings website, but they are 15 bucks more. Fyi, when I purchased on Amazon, the lights were purchased through a company called Nado Stuff, so maybe they will restock in the future???? Another FYI, there are many Mictuning products on Amazon and they all seem cheaper there vs. buying directly from the Mictuning

http://mictuning.com/c/led-headlight_0061
 
Top