Long time lurker finally joined

hihosilver86 · Jan 20, 2018

I've been lurking these forums for a little over a year now. Finally decided to join and introduce myself. I bought my Ram back in July of 2016. It was completely stock with the exception of aftermarket keyless entry system. I have done quite a bit to it in that time since. Anything you wanna know just ask

NoMPG2010 · Jan 20, 2018

Welcome. Goof looking truck

Lufty · Jan 20, 2018

Welcome from WI!

xtremewlr · Jan 21, 2018

Very nice. What size tires are you running with the 3/5 drop and how is the ride quality overall?

hihosilver86 · Jan 21, 2018

xtremewlr said:
Very nice. What size tires are you running with the 3/5 drop and how is the ride quality overall?

Thank you. I am running a 285/40 tire, so far ride quality is pretty much the same as when I had the factory wheels and tires on. I just got the wheels and tires last week and put them on yesterday so my time with them is rather limited.

quietpeen · Jan 21, 2018

Welcome

Jarhead57 · Jan 21, 2018

Welcome to the group :cheers:

joeygster · Jan 21, 2018

Welcome to the forum.

xtremewlr · Jan 21, 2018

hihosilver86 said:
Thank you. I am running a 285/40 tire, so far ride quality is pretty much the same as when I had the factory wheels and tires on. I just got the wheels and tires last week and put them on yesterday so my time with them is rather limited.

How's the ride quality with the 3/5 drop as compared to stock? I have a 2/4 spindle drop, so my ride quality is basically the same as a stock truck. Just curious how it is with the 3/5 on there. What drop kit did you go with for the 3/5? I've been thinking of going lower but I still use the truck as a truck and also want to maintain a decent ride quality overall.

Harley Harrold · Jan 21, 2018

MADDOG · Jan 21, 2018

Welcome to RamForum. You've got a nice, clean looking truck there.

hihosilver86 · Jan 21, 2018

xtremewlr said:
How's the ride quality with the 3/5 drop as compared to stock? I have a 2/4 spindle drop, so my ride quality is basically the same as a stock truck. Just curious how it is with the 3/5 on there. What drop kit did you go with for the 3/5? I've been thinking of going lower but I still use the truck as a truck and also want to maintain a decent ride quality overall.

I have a DJM lowering kit that used 3" control arms. Ride quality is pretty good on the highway, fairly close to stock. I live in a pretty bumpy neighborhood and that is where you can definitely tell the difference.

TruckTime19 · Jan 22, 2018

Welcome!

Long time lurker finally joined

hihosilver86

Junior Member

NoMPG2010

Member

Lufty

Muskies Bite

xtremewlr

Senior Member

hihosilver86

Junior Member

quietpeen

Senior Member

Jarhead57

Senior Member

joeygster

Senior Member

xtremewlr

Senior Member

Harley Harrold

USAF Ret. 36+ years service

MADDOG

Out Exploring Arizona

hihosilver86

Junior Member

TruckTime19

Senior Member

Similar threads

Latest posts

Staff online

Members online

Forum statistics

Share this page