jtruelove
Junior Member
trying to figure out if i can fit 35x12.50r20 tires on my 2017 ram 1500 4x4 with a 3 inch bolt on rough country lift. on stock rims
3 inch rough country bolt on lift
- Thread starter jtruelove
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
jtruelove
Junior Member
on a level it rubs ?
CanadianNick
Senior Member
- Joined
- Dec 3, 2017
- Posts
- 288
- Reaction score
- 168
- Ram Year
- 2011
- Engine
- 4.7 V8
Not necessarily
OP
OP
jtruelove
Junior Member
the 3 inch lift should be a inch higher than the level
Ratket
Senior Member
- Joined
- Jul 14, 2014
- Posts
- 3,571
- Reaction score
- 1,300
- Location
- Arizona-
- Ram Year
- 2018 1500
- Engine
- Hemi 5.7
I think it will rub due to the offset of the factory 20”s I have their 3 uca kit and there is not much room between the tire and the uca now. I would recommend a spacer or more offset wheel.
Last edited:
OP
OP
jtruelove
Junior Member
i ended up running 2 inch spacers. no rubbing at full turn with 35/12.50r20 on factory rims
darren Toth
Member
- Joined
- Mar 21, 2018
- Posts
- 75
- Reaction score
- 41
- Location
- Kenora ON Canada
- Ram Year
- 2010
- Engine
- Hemi 5.7
Aftermarket wheels with a 0 or further out offset of -12 should eliminate any rubbing
Similar threads
Staff online
-
GriffinSenior Member
Members online
- Cableman
- turkeybird56
- teddy Charlery
- Chukbacca
- HEMIMANN
- scricco
- Zoe Saldana
- stevieb92
- BDay2351
- blue ghost
- express2014
- HarryS
- dhay13
- Mike R
- Hardracer
- jws123
- 2003F350
- raggydoo
- minotto
- CoZo6
- Stewart14
- shedkept
- Lewybrewing
- Daviddnv
- TravelinMan66
- Beaniam
- Lsujker
- CanRebel
- thtsaustin
- AZ MARK
- Bmags
- Scottly
- Griffin
- MDORAN
- PWonly
- GNiK
- GrangerMotors
- RonHe
- faoan
- samsdad02
- NJ4X4
- Marshall
- 19REDRAM88
- rickk212
- VikeFan
- recallies
- Ranger54
- StateOfMind
- gevans58
- Arbl