Canbus hid kit

Steveo8x8 · May 24, 2018

Anybody have any luck installing a canbus hid kit and hiding the ballast and adapters inside of the projector headlight. I prefer a clean install and don’t want to see wires. On my 2013 with quads I was able to hide everything Inside with no issues

Sent from my iPhone using Tapatalk

U1arunit · May 24, 2018

Not sure about all kits out there but my GTR lighting one from Headlight Revolution would not fit inside on my '18 Sport with projectors. I have both low and highs installed but even one would not fit in the housing.

JB1 · May 25, 2018

http://www.ramforum.com/threads/ddm-canbus-hid-low-philips-9011-highs-morimoto-vertical-led.116821/

Ram Night · May 25, 2018

I have the 35 watt hid low beam kit in the projector that I purchased from The Retrofit Source. You will have to mount the ballasts and igniters outside of the housing. The kit comes with a waterproof boot that has the wires in it that works great.
Check put the difference between stock low beam with fogs and HID low beam with led fogs.

Jrod · May 25, 2018

http://www.ramforum.com/attachments/dsc_0013-jpg.122370/

Steveo8x8 · May 25, 2018

Jrod said:
http://www.ramforum.com/attachments/dsc_0013-jpg.122370/

Very nice! Which kit do you have?

Sent from my iPhone using Tapatalk

Jrod · May 25, 2018

Steveo8x8 said:
Very nice! Which kit do you have?

Sent from my iPhone using Tapatalk

This was someone else who stuffed everything in their projector. I did not. We both have DDM tuning HID canbus 35W 5500K. Some people have had issues adjusting their headlights after cramming everything in there. I opted to drill the hole in my dust cover, and screw the balasts to the frame underneath the headlight with metal tap screws. I've had zero issues. DDM is plug and play. No grounding and No having to run a power line to the battery.

Steveo8x8 · May 25, 2018

Jrod said:
This was someone else who stuffed everything in their projector. I did not. We both have DDM tuning HID canbus 35W 5500K. Some people have had issues adjusting their headlights after cramming everything in there. I opted to drill the hole in my dust cover, and screw the balasts to the frame underneath the headlight with metal tap screws. I've had zero issues. DDM is plug and play. No grounding and No having to run a power line to the battery.

Ok great. I adjusted mine a year ago and have been happy with where there at at with my halogen bulbs. Hopefully I won’t have to adjust them again

Sent from my iPhone using Tapatalk

Canbus hid kit

Steveo8x8

Senior Member

U1arunit

Senior Member

JB1

Senior Member

Ram Night

Senior Member

Jrod

USAF 1997-2008

Steveo8x8

Senior Member

Jrod

USAF 1997-2008

Steveo8x8

Senior Member

Similar threads

Latest posts

Staff online

Members online

Forum statistics

Share this page