Search results

  1. 67Guzzler

    Rustproof?

    There are many who believe that rustproofing causes more rust (by harboring microscopic amounts of water and dirt / salts) than it prevents. I used to live in a high-salt area where everyone did it and I personally came to feel it was a fad / waste of money. Many manufacturers state that it...
  2. 67Guzzler

    2019 Ram Classic 1500 - Warlock Package

    To those asking "why?" I think it's just marketing extending the lifespan of the outgoing 4th gen platform. It's not a big deal. Nice truck and combo of attributes but nothing special. Kinda like Taco Bell making something new to eat by mixing up the same stuff they already have and giving it...
  3. 67Guzzler

    AlfaOBD

    I could be wrong but that creates a stored error. Again, I could be confused. -Guzzler
  4. 67Guzzler

    AlfaOBD

    Curious -- Did you clear all the error codes? Not sure that should matter but it came to mind. -Guzzler
  5. 67Guzzler

    AlfaOBD

    Yes -- I figured out a trick to tell the difference. With the proper setup: 1) CBC I/O right dedicated DRL Lamp output present- YES 2) CBC I/O left dedicated DRL Lamp output present- YES 3) CBC features- DRL lamp location- DEDICATED 4) CBC Features LED dedicated DRL present- YES If you turn...
  6. 67Guzzler

    DRL question

    Or just read the thread. All the 411 is in there. You can use AlfaOBD to properly disable or enable DRL's as well as changing where the output goes -- Low Beams, Fogs or Turn Signals. ;) -Guzzler
  7. 67Guzzler

    AlfaOBD

    OK -- I was mistaken. I cannot make the high beam bulbs illuminate as DRL's with factory projector fixtures. Procedure: First, I ROLLED BACK all the dedicated settings: 1) CBC I/O right dedicated DRL Lamp output present- YES --> NO 2) CBC I/O left dedicated DRL Lamp output present- YES -->...
  8. 67Guzzler

    AlfaOBD

    I will. Again, I caveat by saying I'm not sure but I could have sworn it was running on the headlight bulb only when I first tinkered. I'll let you know. I 100% agree with this. There is no "rule" saying they can't simply illuminate the high beam bulb in the projector headlight without...
  9. 67Guzzler

    AlfaOBD

    I have the factory projectors and THOUGHT I got the high beams working as DRL's with some combination of settings early on when I first started tinkering with AlfaOBD... I may / just be mistaken... ??? :) -Guzzler
  10. 67Guzzler

    AlfaOBD

    Setting LED SHOULD stop both the PWM as well as stop the bulb-out condition, if it exists. I say SHOULD. NOTE: The cycling of light from PWM isn't always visible to the naked eye but usually is via a photo sensor on your phone. I posted some videos of the pulses and what they look like when...
  11. 67Guzzler

    AlfaOBD

    Yep -- This is the tried and true method on the RAM trucks to disable the seat belt chime. It's been around for years, I believe. Good question!!! -Guzzler
  12. 67Guzzler

    AlfaOBD

    Just got another update -- the fixed version is now up for download... I won't be able to test till tonight. Enjoy! -Guzzler
  13. 67Guzzler

    AlfaOBD

    Good news. Just received the following reply from Alexey: ************************************ Will publish the fix tonight, sorry! Best regards, Alexey Chernikov AlfaOBD
  14. 67Guzzler

    AlfaOBD

    It blows up on me while attempting to make changes in the BCM. I'm running a ZTE Z971 Chinese Crap Phone on Android 7.1.1. :) I also have it on my Amazon Fire 8 Tablet (Google Play Enabled) and I haven't tried that yet.... -Guzzler UPDATE: The Amazon Fire 8 Tablet crashes too but instead...
  15. 67Guzzler

    AlfaOBD

    I really can't recommend them as one of the ballasts failed about 15 minutes into initial burn-in. I was just going for some very small / cheap test mules. The bulbs were fine -- although they had a greenish tint that wasn't supposed to be present. Here are the links: Ballasts (pair)...
  16. 67Guzzler

    AlfaOBD

    So I wanted to blow $30 and "test" the "Enable High Intensity Discharge Headlights" toggle in the Body controller. So I bought the absolute cheapest set of bulbs and ballasts with no harnesses, capacitors, resistors or other "smoothing" devices. What I bought was the worst of the worst crap --...
  17. 67Guzzler

    AlfaOBD

    Hey guys! Here are a couple videos using my crappy android phone. It's able to pick up the pulses with it's photo sensor. Note that PWM being enabled just makes LED's flicker. It doesn't NECESSARILY mean you'll get a bulb out warning or have a circuit shut down, although you 100% CAN have...
  18. 67Guzzler

    2013 - 2015 Projector headlights on a 2016+ truck

    Yes, 2017 is a Laramie Projector truck.
  19. 67Guzzler

    2013 - 2015 Projector headlights on a 2016+ truck

    I have a backup pair of genuine RAM projector headlights from 2013 (9012 low beam vs 9005 low beam in 2016+ fixtures) as backups or for a project someday. Curious if these fixtures are plug and play in my 2017. Wondering if there were any other differences other than low beam bulb type...
  20. 67Guzzler

    AlfaOBD

    Done and it worked for down. Thanks! Not sure. Someone said that it wasn't possible. -Guzzler
  21. 67Guzzler

    AlfaOBD

    Thank you! I found the "GLOBAL UP / DOWN" in the Doors Configuration section of my body log file. Will check it out: Doors Configuration: Global Up: Not set Global Down: Not set Sun Shade: Not set Puddle Lamp Present: Not set Rear Door pre short drop behavior: Not set...
  22. 67Guzzler

    AlfaOBD

    So far I have: Enabled LED for license plate bulbs (can see via backup cam they're not cycling anymore) Enabled LED for fog lights bulbs (can see via phone photo sensor / camera they're not cycling anymore) Enabled DRL and set to USE LED turn signals (factory projectors -- very bright) Set my...
  23. 67Guzzler

    AlfaOBD

    Thank you! I've had some success now that I've gotten the hang of it. I received my pin early yesterday afternoon and I do the RF-HUB doing a reset / replace even when unnecessary and I've since had good luck. I've done DRL, adjusted the Heavy Duty tire thresholds down from 60/80 to 35 all...
  24. 67Guzzler

    AlfaOBD

    When saving to the RF-HUB doing a reset / replace?
  25. 67Guzzler

    AlfaOBD

    Forgive me in advance if this has been asked and answered (yes, another one... :( ) but I'm waiting on my 4 digit pin (salesman is getting it for me tomorrow) and I've made some changes playing around and not knowing what I was doing: Car configuration change: DRL customer setting...

Latest posts

Staff online

Members online

... and 11 more.
Total: 1,348 (members: 61, guests: 1,287)
Robots: 1,784

Forum statistics

Threads
195,478
Posts
2,870,795
Members
156,196
Latest member
jackjudy3

Share this page

Top