Search results

  1. 03MopaRamman

    Synthetic Oil

    Still a Good Thread. I last posted in it back in 2013. So maybe I am Back, its been a couple years since I been on but I still get to read the posts via my phone. So I will keep my new reply here to the Topic. Just picked up a 19 Ram with 18K Km (11 K Miles) and decided to use the Mopar 5w20...
  2. 03MopaRamman

    Black Rams(blacked out or not) POST your pics!!!

    Test....Ok sorry guys. My stuff still works on the forum. Thanks Danny
  3. 03MopaRamman

    Black Rams(blacked out or not) POST your pics!!!

    Been a While will be a year soon since I finally got back into a 4th Gen Ram. Had to be an 8 speed with 3.92 Gears incase I have to move the trailer. I'll get up a Pic soon and fix my signature which I can't see but then again I am on my tablet. Regards. Danny
  4. 03MopaRamman

    Headers without the noise?

    Good stuff right there. Matt has good advice and has evolved with these 4th Gen Trucks since Day 1. I definitely love my factory Muffler as its nice to drive at least one smooth quiet Factory Hemi when you have two 5.7 Mopars. Danny
  5. 03MopaRamman

    Oil Weight Recommendation for SC Hemi?

    0w40 been running it since before Mopar 6.4s swapped to it which is a blessing and got me off the once only brand Rotella, now it's avail in Mobil one. Danny
  6. 03MopaRamman

    major differences between years?

    Just to add that the 9 speed in the Trailhawk works just fine in 2016 Models with newest software updates and all the modes ie snow, and especially sport you can feel a difference, however we have yet to go fast enough to get 9th gear. I like the 8 speed/3.92 Combo and is one of the reasons I...
  7. 03MopaRamman

    Too Many Miles?

    If they where smart and or honest they would have gotten both the window sticker reprint and explanation for the mileage without hesitation if they truly believed you where interested. A few years back the first question they would ask you is what you do for a living and if you did not reply as...
  8. 03MopaRamman

    Should I switch to synthetic?

    Nice, With MDS off I would switch to 0w40 and get a new Synthetic Recommended Oil Cap from the Dealer! The 6.1 Hemi Click type should work on the Truck VVt Intakes, it does on the LX Car ones.
  9. 03MopaRamman

    Hemi Tick??

    My Low miles 05 LX Hemi with Milled Inertia Heads and good length push rods is a Hemi Ticker Champ when its warmed up, but My DD 14 Ram is the Quietist Hemi I have ever heard, I like it so much I decided to keep it Bone Stock (For Now). Danny
  10. 03MopaRamman

    Where you from?

    Just a Square Head from Montreal, settled in the Alberta Badlands and work on the Prairie Ranges Year Round. Asked for Vinegar for my Fries Once at Popeyes Chicken down South and ended up with Purple sauce and was called a Damn Yankee by the Lady serving me after I told her I was from Canada! Danny
  11. 03MopaRamman

    03 ram, updating to an 08 motor.

    You just made me remember he can do the #10 Pin Torque Management delete mod for almost free on his 03 Only trans along with the Power wire resistor Mod for that 20 degree fooling of the IAT at WOT, heck throw in a 3.92 IAT while your at it. I can see some of the Old 03 threads may come in handy...
  12. 03MopaRamman

    03 ram, updating to an 08 motor.

    Bump for the ol 03 Basterds Gurus, I know your out there! Join jotin's thread. Danny
  13. 03MopaRamman

    03 ram, updating to an 08 motor.

    EGR Block off for the Head. 5303 2739 AA
  14. 03MopaRamman

    F/S Moes LSD nib with extras for the install.

    Edit" Ok answered that while I was typing. Matt knows.....I was Told The Mopar LSD assy does not come with the end bearings and races but they are 100 bucks or so as you stand a good chance of wrecking them if you attempt to transfer them over from the open carrier. On my list to do for my 3.92...
  15. 03MopaRamman

    03 ram, updating to an 08 motor.

    My MDS in the car is turned off in the tune and no probs but I use 0w40 oil too. I am just not a fan off pulling heads unless it is to mill or swap to performance ones, since valve springs and seals can be done without head removal. There is a cost for new gaskets and bolts. If that 08 Block...
  16. 03MopaRamman

    03 ram, updating to an 08 motor.

    Nice work. You can leave in the MDS Lifters if it has it wont hurt nothing. I can show you a nice Orange Painted Hemi with OEM Chrome covers (03-05)and nice Blue Taylor shorties. PM me. I had success with the Pacesetter Long-Tubes on my Ram and the OR pipe. A good cam that runs on an 87 or 91...
  17. 03MopaRamman

    5100 not installed properly?

    Nice set-up! Now IMO those bottom coil resting plates as well as coil orientation should be same or mirrored exactly, not just slapped together. If its screwed up you can check for proper orientation on another Ram. At least the ring count is the same. Take it back as I believe those are...
  18. 03MopaRamman

    Using 89 octane for first time.

    A lot of Mopar engines recommend the use of 89. Just Got my 14 Ram and 89 it is but arournd here not all stations carry it and I can usually get 91 cheaper at Cosco so I half and half it leaning heavier on the 91. I also have no probs doing 87 if that's all there is at our local station 30 miles...
  19. 03MopaRamman

    Late model 2014-2016 Hemi tick or other dealer said was normal

    Hard to find a Best Opinion when dealing with those Guys so this is a good place for opinions and first hand experience. I am Luckey my 14 purrs like a kitten, I pulled into a Dealer parking Lot one time with my Modded 05 Magnum and the Head Mechanic ran out with a concerned look on his face and...
  20. 03MopaRamman

    2014 R/T - 13.09 in Full Street Trim on 22's

    Nice Little Truck! I like the Colour Similar to my Wagon. It took me a while to find an 8 speed 3.92 combo Ram but Glad I waited. Nice to know what supporting Mods work well together so although I don't plan to Mod the Truck I have noted the list above particularly the Moes TB which seems to do...
  21. 03MopaRamman

    news on ram redesign

    Just Sold my 12 Harley F-150 with 96 K Miles for 40,900 CAD after Paying 31 K for it last August, and Top Price used for low miles is 47K so I took the Money and Bought a 2014 Ram. I would not say it is Junk, best Truck out of the last 4 I have owned for Towing My Trailer even with the 22 Inch...
  22. 03MopaRamman

    Talk to me about 275/60r20 Duratracs

    Sorry can't Answer your exact Question however In Canada x 4 Installed w Taxes are $2038 for the 20" so I chose a different Tire. Never asked but in a Big 17 Size I am pretty sure they are E Rated and up here Come with a Snowflake Rating (Extreme Winter Driving). Best Tires I ever had on my 3rd...
  23. 03MopaRamman

    Mopar intake and hood duct adaptor to make sport hood functional

    Pass side scoop, Thanks, Got it! Interesting Mod Though. Danny
  24. 03MopaRamman

    Quiet Performance Muffler

    Interesting Thread, I Guess I am Back on this Forum as I picked up my Ram Saturday and Right away swapped my Tips for some Nicer Ones Yesterday and after some thought on the different Magnaflow Options, etc and previous experience of spending $$$$ on Exhaust for my Trucks I've owned have decided...
  25. 03MopaRamman

    Srt8 6.4 intake manifold

    Good Stuff. If I may Comment one last time. There is one Eagle LX Intake in existance That was Port Matched to an earlier 5.7 Non VVT Block/Inertia Heads successfully without the use of spacers. I have also used the Modern Muscle adapters for a 6.1 Intake Install on Earlier Block Heads Combo. I...

Latest posts

Staff online

Members online

... and 1 more.
Total: 1,080 (members: 51, guests: 1,029)
Robots: 1,775

Forum statistics

Threads
195,465
Posts
2,870,571
Members
156,174
Latest member
Madmav79

Share this page

Top