Search results

  1. rduchateau2954

    Building a motor for fun?

    Something that's been in my head for a while now. Looking at buying a house out in the boonies, when that happens I'll also be buying some eco-box little SUV for commuting. Truck will be regulated to days off, truck stuff, and towing the boat. I've got it in my head to pick up a junkyard hemi...
  2. rduchateau2954

    I wanna go fast, but I've got a 5 speed.

    A 5 speed and 97k miles. I've always drove old gm trucks (94 or older), and switched to Ram years ago. I did about two minutes of research when I first bought this truck and immediately learned the 5 speed trucks can't handle power, so I stopped looking. Now she's pushing 100k and with no...
  3. rduchateau2954

    Tires, wheels, load range, sidewalls.

    Hi all. I've been doing some towing related research and stumbled across a bit in relation to how manufacture tire and wheel size, coupled with recommend load range. Basically from the factory your truck is setup to balance the load in the center of the sidewalk. Changing this balance can...
  4. rduchateau2954

    Backup camera wire routing

    Those if you that have installed aftermarket backup cameras, where did you bring the wires into the cab? Thanks
  5. rduchateau2954

    Aftermarket Backup Camera

    I've got a 7" JVC HU in my '11 Ram. Going to do some audio upgrades and figured I'd add a backup camera while I've got everything apart. What aftermarket backup cameras do y'all recommend? What should I be looking for? What should I about? Thanks
  6. rduchateau2954

    How far to push 3.92's

    Ive always liked our trucks with a 4" lift and 35's. Seeing as how most lift companies have a very small price difference between 4" and 6" kits it seems kinda pointless to buy a 4". However I really think that a 6" looks best with 37's. '11 Ram RCSB 4x4, how far would yall push the stock 392's?
  7. rduchateau2954

    Catted vs catless longtubes

    Atm I have a catback with a carven AR1 si/so muffler and no resonators. Its loud, but not too loud and the sound is amazing. Looking at headers and trying to get a better idea of what I'm dealing with. Two issues I have is I think if my truck gets any louder the fuzz is gonna have enough. Two...
  8. rduchateau2954

    Motor work questions

    Stock 2011 RCSB with a cat back. Always had it in my head to get a ported tb, and a hemifever tune. It's been 4 years and I might be getting a small exhaust leak. That's got me thinking maybe I finally go catted long tubes. Then that really got me thinking, what would come next? Cam? Heads...
  9. rduchateau2954

    Thoughts on having wheels painted?

    For years now I haven't been able to find a set of wheels I like with the exception of super expensive stuff. I find a lot of styles I like but they are always in black. So... my truck is a two tone red and grey and I've had this idea of buying wheels with a simulated headlock and having...
  10. rduchateau2954

    Rear bumper options

    My rear bumper is starting to get little rust spots. What's out there for aftermarket bumper options? Not a fan of roll pans.
  11. rduchateau2954

    HU Recommendation + 6.5"s in the door?

    Looking to upgrade, but mildly. 2011 RCSB. Stopped by a local place to see what's up. He recommended one of two HUs; the Pioneer 2300 or the JVC 430. He also recommended running 6.5"s in the doors instead of 6x9's. Thoughts? I don't need anything crazy. I'd like to Bluetooth my phone to the...
  12. rduchateau2954

    Wheel Photoshop Please

    I know this one might be tricky but these are the best pics I can find of these wheels in this finish. I can take different truck pics if you need them
  13. rduchateau2954

    Tune for my '11?

    I've got an intake sitting in a box. The exhaust is factory manifolds and cats into a carven AR1 and no resonators. If I picked up a throttle body from Moe's, what tune do you recommend? I'm really not looking to tear into the motor. I do have 33x12.5" tires and may go up in the future...
  14. rduchateau2954

    Manifold Stud Questions

    Gonna try to tackle my manifold studs in the next few days. I have some questions. 1.) Manifolds are listed as left or right. What is what? Is the passenger side right like I'm sitting in the truck or left like I'm standing in front of it? 2.) I'm seeing a few methods for getting the...
  15. rduchateau2954

    2011 Ram Lower Ball Joints

    Went in for an alignment only to find out I've got play in my driver lower ball joint and passenger outer tie rod end is going. What's the skinny on ball joints for my truck? Press out/in? New lower control arms? What is the go to brand for replacements? Thanks 2011 RCSB 4x4 Outdoorsman
  16. rduchateau2954

    TPMS Sensor going out?

    Got new tires put on a few days ago. Took it up on the highway that day and all was fine. A couple days later I accelerate pretty heavily going up and an on ramp and my tire pressure warning light comes on steady. After a few seconds it goes off. It does this the whole ride home. Then again...
  17. rduchateau2954

    Where do you guys shop for Wheels?

    I just spent the last hour shopping for wheels. Only to find out I couldn't select offset or wheel width or something like that and leave the site. The few sites I did find only had a couple different wheels. Is there someplace I can go that has a decent selection of wheels where I can...
  18. rduchateau2954

    Manifold Bolt Specs

    Getting broken studs fixed, but the shop will use factory hardware unless I being in my own. Suggestions? Sent from my AS985 using Tapatalk
  19. rduchateau2954

    I'm thinking it's time for wheels.

    I've an idea but I want to see what you guys come up with without me stating my preferences. That said, nothing bigger than an 18" wheel.[emoji12] Sent from my AS985 using Tapatalk
  20. rduchateau2954

    Rim request

    These wheels: On this truck Sent from my AS985 using Tapatalk
  21. rduchateau2954

    Help! Truck died, won't start.

    -4 with -30 wind chills. Truck wouldn't remote start. Manually started it. Ran for 2 mins and died. Trailer brake module was flashing when I opened the door. Truck won't start, won't try to start. I have to go to work now, and work tomorrow. Help please. 2011 ram outdoorsman 5.7 4x4 rcsb...
  22. rduchateau2954

    So this guy wants to trade...

    Selling a bow and this guy offers this: http://www.pioneerelectronics.com/PUSA/Car/AppRadio/AppRadio+2+(SPH-DA100) 7" Pioneer Touch Screen. Is this a good unit? How much work will it take to get installed and setup in my '11 Outdoorsman? Anything you can tell me about it appreciated. I am a...
  23. rduchateau2954

    Full or Large Decal on Slider Rear Pic Request

    For a while I've been debating on putting a large decal on my sliding rear window. Looking for pictures to help me decide. Thanks, Ryan
  24. rduchateau2954

    Where to buy Bilsteins?

    Simple as that. Truck needs shocks, figured why not level at the same time? Also, what are you guys running in the rear with the bils? Not looking to lift the back at all. Thanks, Ryan Sent from my AS985 using Tapatalk
  25. rduchateau2954

    Headers Maybe? Help me decide!

    My '11 RCSB 5.7 Outdoorsman has the manifold tick. Only for the first 30 seconds or so but it drives me freaking nuts. So, a new manifold just seems dumb. Shorties maybe just to make it easy. Or the big dogs. I am leaning towards long tubes but here are my concerns: I've got about $550 into my...

Latest posts

Members online

... and 10 more.
Total: 1,354 (members: 60, guests: 1,294)
Robots: 1,825

Forum statistics

Threads
195,477
Posts
2,870,745
Members
156,195
Latest member
jerllouk

Share this page

Top