Search results
-
No start after replacing crank sensor
Bump. I've got fuel at the rail, spark at the plug, & it still won't try to fire. No ideas from anyone? A mechanic told me to test that the crank sensor is getting 5v at the plug, so I will try that the first day it stops raining. he also said to look for the phrase "nobus" on the cluster...- stev0n
- Post #7
- Forum: Engine & Performance
-
No start after replacing crank sensor
Bump Sent from my iPhone using Tapatalk- stev0n
- Post #6
- Forum: Engine & Performance
-
No start after replacing crank sensor
Ok after plugging the crank sensor back in I AM getting spark. At least to the #1 cylinder. And I tested the fuel rail again & I have pressure. But still no start. the #1 piston is at the top when the timing mark is at TDC as well Sent from my iPhone using Tapatalk- stev0n
- Post #5
- Forum: Engine & Performance
-
No start after replacing crank sensor
Unplugging the crank sensor made no difference. Still wouldn't attempt to fire and gave me a p0320 code. Turning the throttle sensor to the left made no difference. Either Sent from my iPhone using Tapatalk- stev0n
- Post #4
- Forum: Engine & Performance
-
No start after replacing crank sensor
Cliffnotes: 2002 4.7 -Driving truck home & out of nowhere it started bucking real hard like violently shaking. Acting like it was running on 1 cylinder & trying to stall. -Tried to make it the 7 miles home -about 2 miles later it dies. -tries to fire but won't stay running more than 1-2...- stev0n
- Thread
- Replies: 12
- Forum: Engine & Performance
-
What did you do to your Gen3 today?
Fixed. Lol I also have to weld in patch panels on both bedsides of the 07, finish repairing the dents in the SRT-10 hood, install cab running lights, then paint the whole thing + the leer camper before putting the whole chassis onto the 2002's frame. But I'm going to do all that next semester...- stev0n
- Post #4,508
- Forum: General Discussions
-
What did you do to your Gen3 today?
Replaced brakes on the front end of the 02. Still want to replace the rear brakes & rotate the tires before my new semester starts on Monday if I get time. Now I desperately need to figure out why I have no compression in cylinder 7 of the 07 & get that fixed ASAP. I also have to pull the LS1...- stev0n
- Post #4,502
- Forum: General Discussions
-
Laramie Leather seat swap question
You are a gentleman & a scholar sir! Sent from my ObamaPhone using Tapatalk. -
Laramie Leather seat swap question
I got excited when I saw your post until I found the sticky...just to find out there is no 07 FSM & the 08 link doesn't work :( -
What did you do to your Gen3 today?
Took a 250 mile round trip today getting 9.8mpg on the interstate in this junk 4.7 to pick up this... Leer 100XQ + pulley system to remove/store it for...... *drumroll*....$400! Sent from my ObamaPhone using Tapatalk.- stev0n
- Post #4,431
- Forum: General Discussions
-
07 body on 02 frame - which lift?
So I'm putting my 07's complete body & drivetrain onto my 02's frame. Trying to figure out which performance accessories kit to get. it appears the kits for 03-08 all have the same basic parts with the 06-08 having a few extras. The 2002 has it's own kit with only the front bumper brackets... -
What did you do to your Gen3 today?
touche. the only place around here that has 3rd gen rams is this guy literally on my street. sells beds for $1,000. Seats for almost $1,000. Wanted almost $600 for a power door I needed. I can't really go for that when I only paid $3,500 for both my rams, running & driving.- stev0n
- Post #3,626
- Forum: General Discussions
-
What did you do to your Gen3 today?
What I wouldn't do to have 15 rams...just for leather seats! lol- stev0n
- Post #3,624
- Forum: General Discussions
-
-
-
Question on painting behind panels-last minute
they make weld-through primer spray can specifically for this. If you have an O'reilly auto near you... http://www.oreillyauto.com/site/c/detail/SEM0/39783/N0472.oap?ck=Search_N0472_-1_911&pt=N0472&ppt=C0171 Pick up a can, it is ABSOLUTELY NECESSARY.- stev0n
- Post #2
- Forum: General Discussions
-
07 Totally Integrated Module questions
I looked for them, but they're all dead links :( Both trucks have the 4.7. I'm using everything from the 07. To put it simply, I'm more or less just adding a transfer case & wiring it all up to a 07 2wd 4.7 -
-
What did you do to your Gen3 today?
320? You sir are fearless! I'm scared to use anything less than 1000 when wetsanding headlights & taillights.- stev0n
- Post #3,482
- Forum: General Discussions
-
07 Totally Integrated Module questions
Simple questions...not so simple scenario I'm taking my 07 2wd & putting the entire thing on my 02 4wd frame. The only 02 parts that will be used are the frame/suspension/transfer case. I know 07's used different transfer cases including the 241-D (with the shifter instead of the dash... -
What did you do to your Gen3 today?
More work on the 07! Got my modified eBay headlights in! Buffed the clear on my radio trim...for no reason... Because I have a double din in my 02 that's going in the 07, so I'll have to hack up & mod this bezel. But I'll just repaint it when I paint the truck. Was mainly wanting to see how...- stev0n
- Post #3,466
- Forum: General Discussions
-
Body lift steering linkage
I've never seen bad things happen personally, but i agree don't cheap out! Hell, when I lived in florida there was a guy that built a 1st gen camaro & c3 vette - both had steel blocks welded onto the frame to give them something crazy like 12" of body lift & he would take them on the beach with... -
How to repair 3rd Gen Ram rear fender rust...*PICS*
You did a GREAT job blending that in! Especially in your garage! I've seen panel repair jobs done in the shop & painted in an actual booth, with blending agent, that didn't look as good...seriously! I've got to weld in new panels on the new ram I just picked up on both sides + back door...- stev0n
- Post #5
- Forum: General Discussions
-
What did you do to your Gen3 today?
Got some more parts painted. Grill badge turned out good. No buffing required. Sent from my ObamaPhone using Tapatalk.- stev0n
- Post #3,434
- Forum: General Discussions
-
What did you do to your Gen3 today?
Thanks! I guess I'll use that spot for off road lights or heated seat switches- stev0n
- Post #3,426
- Forum: General Discussions
Members online
- stevenP
- DAK2
- Robert Nims
- Black1500Ram
- Warlock2024
- WY-Dave
- nsBoost
- RamCares
- s_waskewicz
- Rebel Guy
- 33hemi
- RamminMopar
- JF19Longhorn
- Daw14
- Cummins diesel
- samsdad02
- star_deceiver
- AlexC2350
- Tom Davis
- John E
- UAQDADDY
- Zyphyon
- truck2014
- RamBoss316
- Bmags
- jhun
- Wallyb4
- Atcer2018
- D1DAVE
- guage1311
- Murphy Slaw
- silverstreakequip
- mrack
- etbrown4
- marine0311
- RebelDad
- tjfdesmo
- Racer9
- rzr6-4
- aces-n-eights
- jmr
- Technopac
- Pcc3737
- Curmudgeon
- dsherman26
- Brandon-w
- 2003F350