Search results
-
Inez failed relocation brackets
Mine rear location brackets failed also. Just call IHC, they'll send another pair. Just send pics. I used messenger on Facebook, fast response time, got new brackets in 2 days. -
Airlift Bags
Thank you for the part number, I have noise also from rear springs. Hopefully it helps. -
4/6 to 5/7
Crown Suspension makes a front spring 1'' lowering springs for our trucks. Truck be 5/7 now. Cut another coil in the rear. I don't think you have to buy their 5'' drop control arms. I think the guys at Moes Performance lowered their truck that way. Was going to go this route, but I use my truck... -
Double Check Your Inez Brackets
Noticed something was wrong a few weeks ago like something broke. Both brackets broke on each side. Had to park my truck. Called Inez, shipped out replacements in 2 days. Brackets are beefier. Happy with their quick response. -
Need list for 2/4 drop
Need Illicit no cut relocation brackets. These center axle in the wheel wells. Look up Illicit Customs on Facebook for pictures or here on forums. Eliminate wheel hop and drive line vibration. As for shocks, everybody likes the pricey QA1 or BellTech Street Performance shocks. A few have the... -
Inez 4/6 review
Let us know how the Bilstein's work out, very interested. -
Inez 4/6 review
This how truck sits now with 22's. Left the back higher. -
Inez 4/6 review
I have the same kit. I installed the AirLift Durango bags in rear to help out with bottoming out. Still using Pro Comp shocks that came with kit. Looking for better shocks in rear. Those Monroe shocks that you mentioned to tall for the 4/6 drop. They work great for the 2/4 drop. Waiting on reply... -
Inez Hotrods 4/6 Drop
Currently have the Air Lift bags installed. Going to drop truck an inch in the back to level out truck. Have to take out bags, bags to tall to work correctly. -
Inez Hotrods 4/6 Drop
Pro Comps to bouncy for me. Thats my opinion. -
Inez Hotrods 4/6 Drop
I tried the ProComps out that came with kit, didn't care for them. Be reinstalling the Belltechs again. Q1A are too expensive. I'm very happy with the Belltechs, just my opinion. I will be selling the used Belltech kit that was on my truck: Front springs Rear springs Front shocks Track bar... -
Inez Hotrods 4/6 Drop
I trimmed a coil and a half. Cut 3/8 of an inch of the inner tie rods. Probably going to cut a quarter more on the rear springs, level out the stance. -
Inez Hotrods 4/6 Drop
Tire size is 275/55/20. Screwed out 3/8 of an inch on the upper A-arm, alignment was set from there. Tie rods shaved off. Alignment back to factory settings. Upper A-arm was not removed doing alignment. -
Inez Hotrods 4/6 Drop
More pics of the Inez Hotrods 4/6 drop kit. -
Lowered 4th Gen Pics - Show Em Off!
My 2015 Black Ram Express lowered with Inez Hotrods 4/6 kit. Very pleased with ride. Tires are 275/55/20, Falkens. Rear bump stops are removed. Haven't bottomed out yet. Drives normal. Tie rods shaved off, alignment back to factory settings. Left the rear Beltech shocks on and running factory... -
Inez Hotrods 4/6 Drop
Very happy with the kit. I strongly recommend get a plasma or torch cutter to cut off rear upper control brackets on top of rear axle. It can be done with grinder with a cut-off wheel or saw zall. The latter will take up a lot of your time. If you never dropped a truck before, this kit is not... -
Inez Hotrods 4/6 Drop
Not sure. i half of an inch distance from the inside of tire to outer upper control arm. Not much room. -
-
Inez Hotrods 4/6 Drop
Finished with the drop kit. Alignment went well. -
Illicit bracket updates
I installed those Inez brackets, truck handles great. I haven't installed the front arms yet, been working a lot. You will need a very good grinder or saw zall to remove rear brackets. That was my mistake, didn't have the right tool. -
Inez Hotrods 4/6 Drop
Just installed the Inez drop kit. I just installed the rear brackets for now. Will install the front control arms at a latter day. The rear end is centered now. Don't even think of installing this drop kit without a plasma or torch cutter, I had a hard time with cut off disc. It was a very long... -
Planning to lower my 15 RCSB
I'm fixing to install Inez drop kit, anybody interested in purchasing my used 964 2/4 Belltech kit. Its been on the truck for about a year. I'm open to offers, you pay shipping. Let you know when available. -
Inez Hotrods 4/6 Drop
I ordered the Inez drop kit also. The Belltech rear lowering kit came in yesterday. I called Moe's Performance, they sold out of Inez drop kit. Just got an email, Inez shipping the other half today. Should arrive Friday or Saturday. Hopefully the kit arrives complete. Can't wait to install this... -
Finally pulled the trigger on the rims and lowered it
Awesome truck. What's the brand of wheels and size if you don't mind.
