Search results

  1. R

    The 6.4 HD Hemi Thread

    thanks for the reply my 2500 Ram is used to pull a 10 k # fifth wheel 90% of the time and i live in Texas i did not like the gearing / shifting when in higher elevations the motor torque i feel is totally adequate. i feel with a lower ratio the tranny will not "hunt" so much . do you tow in tow...
  2. R

    The 6.4 HD Hemi Thread

    rear end gear change who has changed the rear gears in the Ram 2500 from 373 to??? and what results did you get? other changes that have to be made flash etc??
  3. R

    Brake Controller

    just checking back in to see if there have been any movement on this issue. i see that an IBCM has been flashed wonder what the deal is here ? i just had another of my "FREE oil /filter changes and tire rotations" ref: #587 and #596. I would suggest this route to follow and if and when a...
  4. R

    Brake Controller

    Gentlemen Ram Customer Assistance got back with me and i was told that they would repay to me the out of pocket expense on the purchase of the p3 plus the installation fee paid for by me to have it installed. we visited for a bit and decided ILO $ i would be better comped by services. 4 years @...
  5. R

    Brake Controller

    here is an update on my adventure. after visiting the local Ram service center and having my P-3 installed as instructed by RCC i paid the $45.00. that was Friday and Monday RCC calls me and i am instructed to send them the receipts and will call me later this week and tell me how they are going...
  6. R

    Brake Controller

    previous messages state that you unplug one of the connectors to the oe controller and plug the after market controller into it and the truck does not know the change has been made.
  7. R

    Brake Controller

    cc rider,Kwhite,Totesmygoats,BossHogg,monteholic; guys my truck just spent the day with the local Ram service mgr and i want you all to know that it passed the "star"'Blower test' i can sleep good to night. I have to say that the local Ram dealer and service mgr know that there is a problem but...
  8. R

    2016 itbm

    Blackbase did they tel you that in writing? over the phone ? how was that told to you?
  9. R

    The 6.4 HD Hemi Thread

    long short tall small yada yada yada. i do understand the industry slang for tall gears etc what i am trying to find out is if i am going to go to the expense of re gearing my two wheel drive truck with the 66RFE auto tranny to put the engine in the beginning of the peak torque rather than...
  10. R

    The 6.4 HD Hemi Thread

    i cant find a graph, dyno run etc showing HP/Torque to RPM on the 2015 Ram 6.4L anywhere could somebody help me i am trying to deturmen the best gear for my truck.
  11. R

    The 6.4 HD Hemi Thread

    4.10 vs 4.56 ? running 3.73's stock 275/70 R 18 tires that measure 31" tall pulling a 5th wheel that truck and trailer gross just short of 18k total. OK here at lower elevations and flat land but in the long run which gear change would you"ll recommend. truck is not a daily driver and used...
  12. R

    6.4 Hemi Gear Swap

    stock tire is 33" tall. which gear set would be better (4.10 or 4.56) IYO for pulling a 12 K R/V i have 373's now 6.4L 2500 and OK here in Texas but i think lower would be better at higher elevations especially in the mountains this truck is used exclusively for towing the R/V. I have not seen a...
  13. R

    Brake Controller

    I quoted that to the service manager to illustrate my point that this was not going to be a pat u on your back ,see ya situation. BTY did any of you request a pow wow with your area Ram rep ?
  14. R

    Brake Controller

    i received a phone call from the service manager of my dealer this morning and we had a long talk about our safety issue with heavy trailers. he suggested that i call Ram Customer assistance to get them involved in the chain of command.prior to that i e-mailed RCA and their response to me was...
  15. R

    Brake Controller

    I have been following this for a while so i made a visit to the local Ram dealer ship and requested that the ITBM be checked and sure enough i was told "no codes and all is working " there were no faults found. when questioned what were the voltages i got a blank stair so i asked how was no...
  16. R

    The 6.4 HD Hemi Thread

    gear change My 2015 2500 CC SB 6.4L 3.73 does well at low altitude hauling a GCVW of 17k (truck + 5th wheel trailer)but i wonder if i might be a bit short on the gears at higher altitudes and western mountain states . i use this truck primarily for pulling the 5er. in hind site i should have...
  17. R

    2500 lowering kit

    has any one lowered a 2015 2500 CC SB 2" in front and 4" in rear? if so where did you get the springs for the 2500?
  18. R

    2015 tradesman 2500

    i am not a fan of air springs/ride. leaks always happen at the most inopportune time. air assist is OK. before i would alter the original springs i would have to get the specs to be sure i was helping not hurting the situation. i could also do a comparison on some existing coil springs that...
  19. R

    HD Tire Pressure Monitoring System Reset

    just got back from the Ram dealer and gave the service tech the printout on the procedure and wala job well done. set at 45 psi cold inflation press @ 50/55 psi and no lights/ chimes etc. no charge either for a job that should have been done during delivery service.
  20. R

    2015 2500 cc sb lowering

    has anybody lowered/replaced the rear coil springs about 2 inches?
  21. R

    2015 tradesman 2500

    the older 5th wheels over hang is a bit lower than the newer ones and the newer trucks are a bit taller than the older ones and it is best to have at least 6 inches of clearance between the bed rails and the bottom side of the 5th wheel overhang to allow for changes of street angles going in gas...
  22. R

    HD Tire Pressure Monitoring System Reset

    my service dept at the local Ram house told me no also because of bla bla bla. so i made a phone call and just talked to the Ram customer service dept and i was told no problem to reset the TPMS and the person on the other end of the line put me on hold while they called the local service dept...
  23. R

    2015 tradesman 2500

    has any one lowered a 2500 with coil springs on the rear? need to drop it about 2" so 5th wheel will have more clearance to bed rails. i have not ha any luck finding replacement coil springs.

Latest posts

Staff online

Members online

... and 10 more.
Total: 1,398 (members: 60, guests: 1,338)
Robots: 1,739

Forum statistics

Threads
195,457
Posts
2,870,514
Members
156,167
Latest member
freeswimmingfish

Share this page

Top