Search results

  1. A

    Trailer Brake Controller and Parksense Sensors not working

    I just did this, and I did not see the indicator light pop up. I don't ever recall seeing this light, even when everything was working correctly. I'll go ahead and check the wiring. Hopefully I can get it done on or before the weekend. My camper is also very light, so maybe I can jack up one...
  2. A

    Trailer Brake Controller and Parksense Sensors not working

    When I start the truck, the error message pops up on my dash. I cleaned all the connections on the four sensors in the back. The lights indicating that the sensors are disabled is not on/
  3. A

    Trailer Brake Controller and Parksense Sensors not working

    Damn, I finally got around to checking all of those fuses and they all look good. The trailer brake info pops up when I slide the lever. Just to actuation of the trailer brake percentage going up...
  4. A

    Ram Tow Hook Mount Removal

    Hey guys, I have a front bumper that I fabricated a while back, and I think I am going to remove the winch plate that sits on the tow hook mounts and fab up a skid plate that attaches to the cross member. I was thinking about removing the factory tow hook mounts. I am referring to the...
  5. A

    Trailer Brake Controller and Parksense Sensors not working

    Hey yall, I have a few question regarding my 2013 ram 1500, 5.7. I am going to be doing a cross country tow in the next few months, 4,000 pound travel trailer. My ram is equipped with factory trailer brake controller. I haven't used in it a while, but when it did work, I remember that on the...
  6. A

    Question: Suspension/coilover upgrade

    Hey I appreciate the response! I would save money over the next 12 months or so it wouldn't be so bad. I think they would be very helpful
  7. A

    Question: Suspension/coilover upgrade

    Hey guys, So I am beginning my long road of research as to which route I want to go as far as light suspension upgrade. I have a 2013 ram 1500 sport, 4x4. I have fabricated a tube front bumper with a winch and roof rack. I believe there two additions add around 400 pounds, maybe a bit more...
  8. A

    Towing and hauling capacity question.

    Thanks so much for this real world, in depth response. My front bumper is a benefit in that it does put some good weight in the most forward position possible. Also, with my roof rack, I can put my gas cans and such, right between the two axles. I think I'm going to be fine too! I am...
  9. A

    Towing and hauling capacity question.

    Hey all, I really appreciate the information. The good thing is I don't have a wife or kids, just a 40 pound hound dog! The specific trailer I'm looking at, the owner told me he actually puts his dirt bike inside when towing. So I could probably do the same. Additionally, the bulk of my...
  10. A

    Towing and hauling capacity question.

    Hey folks, I have a question about what my truck is capable of, safely, and without damaging the components. So I have a ram 1500 sport quad cab, 2013. I have fabricated a tube bumper and roof rack. The total for these two additions is around 350 pounds. I usually carry around 350...
  11. A

    Trailer Lights not working

    Hey folks, I know it has been discussed before, but I am having trouble finding the exact information I need. I have a 2013 ram 1500. It has both of the trailer light plug-ins. I am not sure they have ever worked, but I haven't ever really done and troubleshooting. None of the lights work on...
  12. A

    Winch mounting location question

    hey thanks for those pictures and the advice. The bumper that I fabricated uses the standard style "buckets" (as I call them) that you see on prerunner bumpers. I'll fabricated a little kicker coming off the buckets, going down to the the winch plate. That should give it more than enough...
  13. A

    Winch mounting location question

    Yeah I read that thread. Lots of good information, but not sure it will work for my application. Do you think these hook mounts will be sufficient to hold with winch and bracket with just a high-strength bolt in the factory hole (one each side). I'll probably also weld the bracket onto the...
  14. A

    Winch mounting location question

    Hey guys and gals, So I have a question about mounting my barn-find Warn M10000. I believe it is from the late 80s. Anyways, I already have a tube bumper that I built. It weight around 140 pounds I believe. Maybe more maybe less. I was wondering if I can use the section of the frame...
  15. A

    Oh boy, which wire did I snip!?

    Okay the color of the wire is black, and what looks to be a grey stripe. I believe my temperature sensor for the external temperature is not reading correctly. Would this be the wire in questions?
  16. A

    Oh boy, which wire did I snip!?

    Hey all, so I fabbed up a new bumper for my truck. I was installing some light when I made a major boo-boo. So I was cutting a hole in my firewall grommet thing. Long story short, I snipped a wire. I don't think I snipped any other wires. I can't believe I did it, and I sure as hell won't...
  17. A

    Hold-up in replacing map lights!! Please help

    I think I am going to try to do the modification eventually. I just need to work up the nerve!!
  18. A

    Hold-up in replacing map lights!! Please help

    Yeah I found that video. Definitely helps. I just want to be sure how to cut off the little tabs to remove the chrome cover. Don't want to destroy anything but I really want less flickering and more interior lighting. Sigh lol
  19. A

    Flickering LED map light FIXED

    When did you take it in? My truck is also a 2013
  20. A

    Hold-up in replacing map lights!! Please help

    Hey, so what is the easiest way to remove the center console to work on these lights
  21. A

    Hold-up in replacing map lights!! Please help

    Ram Man, I am definitely going to look into your writeup when I get home. I have a special spot in my heart for leds :)
  22. A

    Hold-up in replacing map lights!! Please help

    What part of it is not true? Like I don't have to replace the whole thing, or the plugs are not interchangeable? I'm bummed,! Any other options to get crazy strong lighting in my truck? The lights do, unfortunately flicker....
  23. A

    Hold-up in replacing map lights!! Please help

    Hey Folks, So I was looking to replace my interior lights. I found some videos on youtube about how to replace the lights, and ordered the correct LED replacements. When I got into my truck, to my dismay, I found that my lights seem to be different than all of the tutorials I watched. I...
  24. A

    Replacement bumper for 1/2 Ton?

    Yeah up here in snow country we need it. Im actually most likely moving down to TX soon and I heard that many folks down there just have the 2wd. I wouldn't ever consider it. Yeah I can't figure out a simple solution for the suspension either...
  25. A

    Replacement bumper for 1/2 Ton?

    Of course it's 4wd. Do you mean it'll look a bit aggressive or its aggressive on the suspension? I'm willing to upgrade the front suspension to accommodate.

Latest posts

Staff online

Members online

... and 12 more.
Total: 1,519 (members: 62, guests: 1,457)
Robots: 1,897

Forum statistics

Threads
195,596
Posts
2,872,334
Members
156,402
Latest member
pierogi

Share this page

Top