Search results

  1. S0CAL

    Glass Half Full- When FCA Dealers Get it Right

    Thread dedicated to POSITIVE experiences by Ram owners and their dealers! Far too many negative remarks; let’s strike some balance. First off — I bought my 18 PW and ran into 8.4 Bluetooth lockup. I brought it to the dealer, and I let @RamCares know. It took weeks to get the...
  2. S0CAL

    2018 PW 8.4 Display Freeze

    There are a few posts on this, so I didn't want to pile on to any one of them, not knowing my root cause. 2018 PW, 4500 miles on the ODO. Symtoms: 1. twice witnessed while driving, a random reboot of the display (didn't notice anything prior to reboot) 2. twice witnessed a complete lockup...
  3. S0CAL

    Jack's 2018 PW Build Thread

    On 7/6/19 I picked up this brand new 2018 PW down in San Antonio, as the deal was just too good to pass up. I got decent trade-in value for my 2010 (which I absolutely loved). This Power Wagon has just about everything I want and more, but like so many of us, I do have a few mods in mind...
  4. S0CAL

    Post your "I'm stuck and I can't get out" pics

    Doesn't matter what year truck you have, preferably a Dodge/Ram though. Tell your story, post your pics!
  5. S0CAL

    2 Post Lifts

    I was lurking over at garagejournal while doing research on the the subject. Lots of options but I really want to hear from Ram owners. I am thinking about adding a 2 post lift for my Ram 1500 and my future 2500 (Tradesman PW package, most likely). Anyone have one, and have feedback on its...
  6. S0CAL

    For Sale: Nerf Bar / Steps

    **SOLD** Go Rhino model 415s. Fits a 2010 Crew Cab 1500, likely other years. Won't ship, located in Central Texas. $75. Hardware included. http://www.gorhino.com/415 - Jack
  7. S0CAL

    For Sale: BORA 2" Wheel Spacers

    ** SOLD ** @RedFalcon snatched these up today. Great buyer, nice guy and COOL looking truck. Thanks Bryan for the purchase. - Jack $225 Firm, includes standard shipping. 2" Spacers Fit Ram 1500 09++ 110.30 Hub Bore Put em on, took em off. My -24 offset on my 37x12.5x20s and a 6" Zone...
  8. S0CAL

    For Sale: Nitto Terra Grappler G2 - 35x12.5x20 (4)

    **S O L D** Thanks @McBroom !! $900 firm. Less than 5K miles. Swapped for 37s. Texas (Austin area), will not ship. PM if interested. - Jack
  9. S0CAL

    Mark your calendars, Ramforum members!

    The annual Lonestar MOPAR fest (LSMF) takes place on October 13th. Only Dodge, Jeep and Rams for acres and acres, some to show, some to race. All MOPAR! We want you and your families to come partake in this all-MOPAR event. Come meet your forum buddies, display your ride, watch or race...
  10. S0CAL

    Coolant Gremlins

    I could use some advice guys... 2010 5.7 Hemi, 131K miles It's been pretty damn hot here in Central Texas and I have been eye-balling my coolant temperature accordingly. Sure enough, that bad boy posted 244 degrees on me today and then threw a coolant red alarm indicator on the dash. I was...
  11. S0CAL

    Performance Brakes & Painted Calipers

    Matt (@Hemi450hp) at Moe's Performance was really helpful as I knew I was up for some brake pads and rotors. I went EBC for front and rear (green stuff pads) and I decided on the "green stuff" 6000 and 7000 series pads as well as EBC slotted rotors. I opted for gloss black on the calipers...
  12. S0CAL

    True PW or Tradesman PW

    I want to ask the experts here, because this one is a headscratcher. My next truck is likely going to be one of these. If I have this correct...the PW comes with a 6.4 Hemi, 4.10s, a winch, larger tires, Bilstein shocks, special PW interior, badging/decals, and black flares. But the PW also...
  13. S0CAL

    2018 Lonestar MOPAR Fest - Oct 13th

    Who's goin?! https://www.eventbrite.com/e/lone-star-mopar-fest-2018-powered-by-pennzoil-registration-46364692042
  14. S0CAL

    How loud would this get...

    I want to have my Magaflow cat-back exhaust's chrome tip sandblasted and powder coated. It's welded and the entire section up to the muffler serpentines to about 3 ft for removal. If I pulled it off for a couple days while the work is getting done, any idea how much louder it would be while I...
  15. S0CAL

    Central Texas Ramforum Meetup - Bring your families

    @Pull Ya and I have been tossing around this idea of setting up a truck meetup. We found the perfect place in Central Texas! WHAT: Family friendly Ramforum member rally WHERE: Luckenbach, Texas (just outside Fredericksburg) WHEN: July 21st, 2018 ADMISSION: Free! You're a RAMFORUM member...
  16. S0CAL

    Multiple switch location...solved?

    Looking for opinions guys. I just bought an sPOD to accommodate up to 8 devices that I need to add switches. Some devices are already installed, others are planned (I labeled the panel accordingly). I did a lot of looking around on this forum, and while there are some nifty setups out...
  17. S0CAL

    Show us your detail setup and the products you swear by!

    Big @AdamsPolishes Fan. I am very pleased with the results I obtain with this kit.
  18. S0CAL

    Taking your Zone 4" to 6"

    Less than a year ago I put a 4/3 Zone lift on my 2010, added the Zone UCAs and went with the 3" rear coils with Nitro shocks. I also have 35x12.5 Nitto G2s and Fuel Maverick 20x10 -24 wheels. Everything was groovy until I recently added steel bumpers and a winch. At full turn, I am rubbing...
  19. S0CAL

    What did you do with your 5th Gen this week?

    Following similar 3rd and 4th Gen threads, our forum’s 5th Gen community is growing quickly. What did you do with your rig this week?
  20. S0CAL

    Oil Pan Drain Plug- X-threaded!

    I recently attempted a Fumoto Drain Valve kit for my drain plug. My factory plug works with no leaks BUT in an attempt to install the Fumoto, I realized it was going in cross-threaded. I pulled it out, reinstalled the factory and sure enough, it inserts at an angle. Again no leaks. My die...
  21. S0CAL

    BDS UCA's

    Anyone know if these are the same as Zone UCAs? I did a Zone 4/3 and paid $700ish for the UCAs while I did it. Now I am thinking of tearing the 4/3 out and putting in a BDS 6/3 with coilovers. If the UCAs are the same, cool. If not, I don't want to end up shelling out another $700+ for BDS...
  22. S0CAL

    Replacement Battery Terminal Connectors for Add-ons

    My positive battery cable terminal seems OK, but my negative is all rusted up, and jammed full of ground wires. I am thinking of simply replacing both +/- while I am at it. Anyone have any brand recommendations?
  23. S0CAL

    Panhard for the lifted Fellas

    Lots of threads and info on Parnhard for the lowered setups. Curious, is there any value in an aftermakret adjustable panhard bar for us who have lifted rigs?
  24. S0CAL

    New Bumpers - Iron Bull

    A few good folks here have been following along my pursuit to get aftermarket bumpers. I spent a lot of time searching and I found Iron Bull to be the best overall. I was looking for a winch front bumper, square cutouts in front and rear for cube lights, and a texturized finish. I also...
  25. S0CAL

    DIY: V6 E-fan Install (alternative swap procedure)

    There are plenty of posts on the E-fan install, but I have not found one that easily addresses one of the very first steps: clutchfan retaining nut removal, without having to hit a wrench with a hammer/mallet. Plenty of Youtube videos out there (even Matt's awesome video below) show how to...

Latest posts

Staff online

Members online

... and 10 more.
Total: 1,295 (members: 60, guests: 1,235)
Robots: 1,722

Forum statistics

Threads
195,456
Posts
2,870,510
Members
156,166
Latest member
seems fishy

Share this page

Top