Search results

  1. B

    AlfaOBD

    So far this has been an amazing program...I've been able to activate tilt in reverse, VTA, fog lights with high beams, and am attempting DRL's. So far no luck tho...letting the truck sleep currently. I'm going to go back thru my initial log but off the top of my head I don't recall if...
  2. B

    Installing OEM backup cam

    Well it WAS midnight when I ran into issues. Turns out I had left the radio harness in the box. All hooked up and works great. Thank you. Also had you not mentioned post #26 I would have depopulated the wrong wires.
  3. B

    Installing OEM backup cam

    So I just installed (almost) Mopar #82214240...OEM backup camera. When it came time to tie in to the back of the radio, the wires are too short (limited by where the purple wire comes out of the harness and ties into the BCM. Also, the directions have me populate the wires into the black plug...
  4. B

    OEM tailgate camera quick question

    Great, thank you. I'm crossing my fingers.
  5. B

    Q&A Car Audio Thread

    Just installed my Image Dynamics ctx65's in the rear doors today as that's all I had time to do. So they are still powered by the factory base 5.0 head unit. There is a HUGE loss of bass/mid bass currently compared to the stock speakers. I realize I need to get the amp installed along with...
  6. B

    OEM tailgate camera quick question

    I read through a lot of the DIY thread but my 16 Tradesman has a locking tailgate just no camera. I bought the OEM camera setup and so far from the tailgate up to the engine bay (I didn't look any further) it APPEARS to have the wiring already there...so I installed the tailgate latch and have...
  7. B

    Dee zee

    I've had two of em...one on my 04 and one on my 16...not one issue and I think it's a GREAT add-on especially for the price.
  8. B

    Tow/Haul & Traction Control Button Issue

    I disconnected the blue connector from my BCM during my remote start install last week and THOUGHT I had it seated completely and locked down, but I did not. I went for a drive the next day and my tow haul, exhaust brake, and traction control buttons were all dead. Once I seated the plug into...
  9. B

    Gun Storage in Tradesman?

    Just picked up one of these to mount either under the dash or along the center console. GCS- Gun Control System A very quality piece of kit, made in the USA, and fairly cheap really.
  10. B

    OEM Keyless Entry

    I really really wanted to stick with OEM but the install and having to tow it to the dealer to have it flashed just made it not worth it to me. I went with the DBALL2 kit and it was a 30 minute install. You push the lock button x3 and she fires up. The ability to use the OEM fob and not have...
  11. B

    Q&A Car Audio Thread

    Amp has line level inputs (i was under the assumption I didn't need LOC if going this route)...here's another question...if I used the speaker wire to RCA convertors...could I run my fronts to the amp and rears to the amp and maintain fade control? Disregard...speakers are obviously high level...
  12. B

    2014 RA3 Radio Non-Alpine Signal

    Now if you used RCA adapters and run your front signal to the front channel input on the amp and rear signal to the rear channel input on the amp would you then maintain fade control?
  13. B

    Q&A Car Audio Thread

    I'm about to install my system and am using a Pioneer GM-9605 amp which has line level inputs. Whats the best to pull a signal from the HU...front or rear speakers? Factory 5.0 HU.
  14. B

    Interior pewter/gray color code?

    I have a 16 Tradesman with the black and diesel gray interior. My AC bezels and radio bezel are a kind of pewter/gray metallic color. What color is this exactly? I'd like to see if duplicolor makes it and paint up some other trim pieces in the truck. Thanks.
  15. B

    How To: 13-14 premium cluster upgrade

    Any confirmation the 16's aren't anything weird that precludes you from still using a 14 or 15 cluster?
  16. B

    Image Dynamics CTS65 fitment

    I should have it all in hand by this weekend and will install ASAP.
  17. B

    Radio back button!

    It's the eject button... JK...i'll go out and look at mine shortly.
  18. B

    Image Dynamics CTS65 fitment

    Perfect, thanks. Pretty sure I'm going to run ID 65 mids in the doors, tweets in the dash, and ID 69 6x9 coaxial in the rear....all on a 5 ch amp with the factory head unit...and hope for the best lol
  19. B

    Laramie Interior Handles

    I'll be digging into mine next week and will let you know.
  20. B

    Adding Homelink Mirror questions

    Any updates?
  21. B

    Q&A Car Audio Thread

    Running tweeters in my sails isn't an options as I'm running an EDGE CTS2 gauge setup on the pillar and the tweeter would fire right into it and be blocked in a big way. In my hours and hours of reading the general consensus is to eliminate the dash 3.5's...but tweeters in the dash location...
  22. B

    Image Dynamics CTS65 fitment

    Is anyone running Image Dynamics CTX65 component or coaxial in a 4th gen (2016 specifically)? The depth appears to be fine, good old crutchfield and sonicelectronix all say 6.5's won't fit. I was headed towards the JL C2 line to replace everything, but the ID's seem to get better reviews. Thanks.
  23. B

    Q&A Car Audio Thread

    Etroze86...yes I had planned on powering them with an amp...i figured the HU is nowhere near sufficient.
  24. B

    Laramie Interior Handles

    Has anyone with a Tradesman been inside their door panel and seen if it's prewired?
  25. B

    EVIC cluster recalabration

    Subscribed as well.

Latest posts

Members online

... and 3 more.
Total: 1,277 (members: 53, guests: 1,224)
Robots: 1,484

Forum statistics

Threads
195,492
Posts
2,870,991
Members
156,218
Latest member
TJ4FouR

Share this page

Top