Search results

  1. SwollenMonkey16

    Shocks for Auto Rear leveling Suspension

    It’s definitely very disappointing that no one out there advertises aftermarket shocks for our setup. Sounds like we have to get custom built shocks if we don’t want OEM. And I run a HotShot business so I tow 10,000lbs+ 95% of the time and have 115k miles and shocks still good. I’m just looking...
  2. SwollenMonkey16

    Bed Removal and The Puck System

    That just depends on dealership. Mine is a commercial vehicle and has never been denied warranty work
  3. SwollenMonkey16

    Bed Removal and The Puck System

    When you run a commercial vehicle you can’t run a rig longer than 65’ (truck and trailer hooked) unless you remove the bed and register as a tractor. Also the bed gets in the way if you run low profile 5th wheel trailers. You may be referring to a different picture but that one you posted is...
  4. SwollenMonkey16

    Bed Removal and The Puck System

    I run hotshot as well and also have the puck system. I believe your assumptions are correct. GN will probably be useable but not 100% sure about the companion hitch. I’d imagine if you don’t have much in the bed, it’s only like 6-8 bolts holding it down. Just take it off and check it out
  5. SwollenMonkey16

    Auto leveling necessary for moderate loads?

    If you have a 2500 then the air bag would replace the rear coils. If you have a 3500 then the air bags will work in conjunction with the leaf springs. I wish I would have gone with a regular rear suspension and then added aftermarket bags. I feels like mine rides rough. I did notice that if you...
  6. SwollenMonkey16

    Shocks for Auto Rear leveling Suspension

    Looking to upgrade OEM shocks. Has anyone upgraded their shocks that has the auto rear leveling system?
  7. SwollenMonkey16

    Bumper sensor plugs

    Awesome thank you Sent from my iPhone using Tapatalk
  8. SwollenMonkey16

    Bumper sensor plugs

    I just bought a stock bumper with the fog light cut outs and am going to swap with my current bumper bc it does not have the fog light cut outs. The bumper I just bought has the sensor holes which I don’t currently have. Does anyone know where I can get some black plugs for the sensor holes? I...
  9. SwollenMonkey16

    New Anzo headlights w/ HIDs

    Ha ha bro it always is. It’s a disease Sent from my iPhone using Tapatalk
  10. SwollenMonkey16

    New Anzo headlights w/ HIDs

    You should do the projector fog upgrade. What do you think about that? Sent from my iPhone using Tapatalk
  11. SwollenMonkey16

    New Anzo headlights w/ HIDs

    Ha ha. They are floods. I actually just bought a oem bumper with the fog cutouts so I am going to add spots so I’ll have the spot and flood pod in each fog light and then a 30” light bar for between the tow hooks Sent from my iPhone using Tapatalk
  12. SwollenMonkey16

    New Anzo headlights w/ HIDs

    Decided it was time to upgrade the headlights bc the OEM reflectors are horrible. Happy with this setup. Got the HID kit from Nick at GotExhaust. He really helped and knew what I needed and answered all my questions. Sent from my iPhone using Tapatalk
  13. SwollenMonkey16

    Can’t find DIY on HID install

    I’m curious if anyone has a simple DIY install for the Morimoto Mopar elite HID kit? I’ve looked through the DIY section and can only find full headlight builds. I’m simply going from Quad reflectors to Anzo projectors. Nick from GotExhaust sent me the instructions but just curious if anyone has...
  14. SwollenMonkey16

    Rubber Dust Cap

    Thanks man that helps a lot!!!! Sent from my iPhone using Tapatalk
  15. SwollenMonkey16

    Rubber Dust Cap

    Thanks. I didn’t know if a holesaw would be able to cut a nice hole since it’s flexible rubber so wanted to double check Sent from my iPhone using Tapatalk
  16. SwollenMonkey16

    Rubber Dust Cap

    Hey guys!! So I finally made the purchase of projector headlights[emoji122] now it’s time to buy HIDs. Which do you guys prefer? Also my headlights came with a rubber flexible dust cap, which way is the best way to cut the hole in it for the rubber grommet and wiring? I know most ppl have hard...
  17. SwollenMonkey16

    235/80R17 vs 245/75R17 vs 265/70R17

    Thank you Sent from my iPhone using Tapatalk
  18. SwollenMonkey16

    235/80R17 vs 245/75R17 vs 265/70R17

    Yes I have a 3500 thick-tail now. I just want a little more contact on the floor bc most of my driving is highway but I do go off road every once in a while so I’m thinking the wider tires may help Sent from my iPhone using Tapatalk
  19. SwollenMonkey16

    235/80R17 vs 245/75R17 vs 265/70R17

    It’s time to get new boots so curious on which route to go. The 235s are OEM but I kinda want to go a little wider but the 245s are a tad bit shorter. And the 265s are definitely wider but nearly same height. I tow heavy 90% of the time so what do you guys think? Sent from my iPhone using...
  20. SwollenMonkey16

    Heads up--cabin air filter

    Are these in the diesels also? Sent from my iPhone using Tapatalk
  21. SwollenMonkey16

    Adding DRL'S to ram

    So with just purchasing the $49 AlfaOBD app I can make these changes to my halogen quads? Exactly what else can this add to my truck? Sent from my iPhone using Tapatalk
  22. SwollenMonkey16

    Axle Seal or Caliper Piston Seal??

    I wonder if there’s a defect on the drivers side axle seals. Seems like everyone who has an axle leak it’s the drivers side including mine. Sent from my iPhone using Tapatalk
  23. SwollenMonkey16

    Rear end

    If I’m not mistaking it looks like he does have the dually Sent from my iPhone using Tapatalk
  24. SwollenMonkey16

    Rear end

    That’s weird I didn’t think Aisins care with the 3.42s. But just to clarify you can get 3.73s and 4.10s with the Aisin Sent from my iPhone using Tapatalk
  25. SwollenMonkey16

    Need info on in house 30k 5th wheel hitch

    Awesome I bet it pulls nice!! Did you check out the EZ Floater hitch? https://www.hitchcrafter.com/32ksinglepivotair.htm
Top