Search results

  1. root0091

    Hemifever Update

    you might even want to contact Ryan too if he uses an sct base. With the new derive software many fixed have been applied allowing more access to the ecm. He might even have updates to apply. All about software progress at this point not the individual tuner.
  2. root0091

    Hemifever Update

    With the new version of ACT software Sean with Hemifever has updated tunes for these trucks. Tested today and much better low and mid range torque. Contact him for more information if you purchased tunes through him in the past. You won't be disappointed.
  3. root0091

    Documentation Hub

    Pending Additions. Thank you! Any other documents are greatly appreciated.
  4. root0091

    Help! Transmission problems.

    Shhhhh....
  5. root0091

    Random Misfires and great loss of power

    Multiple misfire, check ignition. The TSB could very well apply to you. If that does not cure it, I would do diagnostic checks on your Cam and Crank sensors.
  6. root0091

    Help! Transmission problems.

    4l 2h n 4h
  7. root0091

    Miss at mid temp?

    OBD II P0753 : Shift Solenoid A Electrical OBD II P0743 : Torque Converter Clutch Electrical OBD II P0138 : O2 Oxygen Sensor Circuit High Voltage (Bank1, Sensor2) OBD II P0305 : Misfire Detected in #5 Cylinder I would do a leak down check on #5 Cylinder, along with checking for spark/fuel...
  8. root0091

    Transmission ID & Correct Rebuild Kit

    https://dl.dropboxusercontent.com/u/83626598/Dodge%20Ram/Service%20Manuals/46RE%20ATSG%20Manual.pdf 09104 - Production Sequence 064-7 - Cannot Find. 19104 - OVERDRIVE EXTENSION HOUSING 4X4 R5 - Revision 5...
  9. root0091

    Roller Rockers Inquiry 1.7 RR

    Proform Pedestal Mount Extruded Aluminum Roller Rocker Arms 66878 - Free Shipping on Orders Over $99 at Summit Racing Pedestal with 5/16 (Same as Magnum Heads), with 1.7 Radio. Will they work?
  10. root0091

    Roller Rockers Inquiry 1.7 RR

    With these rockers, they are 5/16 bolts, so you wouldnt need the conversion kit, only a guide plate kit. Correct? I just want to make sure that the geometry of the push-rods to valve will not change, and that the ratio would still be correct.
  11. root0091

    Yeret's Two-Week-Fixin'-Stuff-Up Blog

    Replacement belt, look into the ones below. You can go with a dummy pulley, like here: Autozone AC Replacement Dummy Pulley Or if you are so inclined, you can simply bypass the pulley completely, I have a list of belts that will work.
  12. root0091

    Headliner

    When finding a material to use, make sure you measure first. 36" on a single cab is very close, which is what Walmart mainly sells. Make sure you use plenty of adhesive as well. Very easy to do, and will look nice in the end. Make sure you find a material that will stretch to conform to the...
  13. root0091

    Tune up on my 1996 5.9, what to do?

    Look at the documentation below, it will help you understand why. They definitely help with detonation, and clean up all aspects of the ignition side. https://dl.dropboxusercontent.com/u/83626598/Dodge%20Ram/Misc%20Documentation/spark%20plug%20notes.pdf
  14. root0091

    Should I be driving with a timing chain cover leak?

    Its really not that bad to do. Service instructions below, along with labor times. Parts pricing below:
  15. root0091

    Should I be driving with a timing chain cover leak?

    Its a v10 8L, but similar to any other Magnum, red is where coolant travels through the timing chain cover.
  16. root0091

    2002 2500 5.9 4x4 indicator light problem

    View diagnostic pages below: Parts Sourcing: https://www.rockauto.com/en/catalog/dodge,2002,ram+2500+pickup,5.9l+v8,1384770,drivetrain,4wd+actuator,10456
  17. root0091

    Roller Rockers Inquiry 1.7 RR

    Ive been looking into it, and the kit S70037 from Harland Sharp is simply a 1.7:1 5/16 Stud/Pedestal mount roller rocker. Stud or pedestal doesn't quite matter, worse case, some all thread fixes that as long as its same tap. Now, correct me if im wrong, Crane makes a kit, 36655-16, to...
  18. root0091

    Documentation Hub

    If anyone does have a copy of the pre 97, and post 97 Powertrain Diagnostics Manuals, it would be much appreciated.
  19. root0091

    Tune up on my 1996 5.9, what to do?

    Speaking from experience, get the 18" with OEM plug style. You can always service loop it.
  20. root0091

    Tune up on my 1996 5.9, what to do?

    NTK, not NGK. Boy is it late here.
  21. root0091

    Headliner

    RAM 94 02 Standard Cab Pickup Headliner No Overhead Console AFH40 | eBay RAM Extra Cab Truck 95 01 Headliner No Overhead Console Sand Gray AFH39 | eBay +1
  22. root0091

    Tune up on my 1996 5.9, what to do?

    Dealer is always best, but almost all aftermarket sensors are about the same. NGK is best from word of mouth for O2 sensors, but that seems to be the only preference. TPS, and IAC are more than likely cross-brand wise even made at the same factory.
  23. root0091

    Documentation Hub

    Added, thank you very much. Any other additions are more than appreciated.
  24. root0091

    Tune up on my 1996 5.9, what to do?

    +1 IrocRam. Added all components that may typically fail on early second gen Ram's due to lack of maint. Autolite 3923 will not be listed in parts store as spark plug, but highly recommended as it is a heat step cooler to reducing pinging/spark knock.
  25. root0091

    Tune up on my 1996 5.9, what to do?

    Upstream is front. Before Catalytic converter. Downstream is behind. On 96's, downstream only check if the catalytic converter is functioning. It can be strapped to the frame for all it cares, as long as its cleaner than the upstream, or front O2 sensor. The upstream, or front, O2 sensor checks...

Latest posts

Members online

... and 3 more.
Total: 965 (members: 53, guests: 912)
Robots: 1,645

Forum statistics

Threads
195,603
Posts
2,872,408
Members
156,413
Latest member
ragarm33

Share this page

Top