Search results

  1. nickpohlaandp

    JBA longtubes with Y installed

    Just sounded like an exhaust leak at the collector. To me it sounded like it was on the passenger side. I checked and checked and checked, there was no leak.
  2. nickpohlaandp

    2014 clutch fan delete

    Looking at the fan from the front of the truck it needs to be turned clockwise. You can do it.
  3. nickpohlaandp

    2014 clutch fan delete

    The fan threads on the pulley are reverse thread. It shouldn't be hard to remove at all. I just left the belt on and put a wrench in the big nut. Whacked it once with a heavy hammer and it came right off.
  4. nickpohlaandp

    2014 clutch fan delete

    What year is your truck?
  5. nickpohlaandp

    Unbelievable Beastmode - Don't yell at me

    There's a dude at the track, maybe a semi-professional photographer, who takes pics of ever car as they leave and then he posts them on his screens there at the track and sells the pics. The pic I posted is one of his "sample" pics that you can get for free, hence the little circle thing smack...
  6. nickpohlaandp

    Unbelievable Beastmode - Don't yell at me

    Yup, all the way down.
  7. nickpohlaandp

    Unbelievable Beastmode - Don't yell at me

    So I know this isn't a Ram, buy y'all seem to like drag racing about as much as I do, so we can all appreciate a sweet run. This is my friends mustang. 2001, bone stock 4.6 SOHC long block with 150k miles on it, long tube headers, carbbed, and a very well setup suspension. He clicked off a 1.37...
  8. nickpohlaandp

    Jay Greene vs Hemifever?

    Are you confused?
  9. nickpohlaandp

    Jay Greene vs Hemifever?

    Why?
  10. nickpohlaandp

    5" Black tips from Carven

    They work like a megaphone. Sounds really good.
  11. nickpohlaandp

    Engine flush or short interval oil change

    Another good thing to do is throw a can of Marvel Mystery Oil in there with the cheap oil. Run that for about 500 miles and then change it. MMO is awesome shit!
  12. nickpohlaandp

    Dyno # guess

    I was closest. Do I get a prize?
  13. nickpohlaandp

    headers install

    This is a no-brainer, must do. It will save you a lot of busted hands and time. It takes 5 minutes to do, do it. On my LS powered truck everything was easy enough to access from the top. On the Hemithe best advice I ever got was to remove the plastic wheel wells.
  14. nickpohlaandp

    headers install

    Ok, I'll give you that.
  15. nickpohlaandp

    Dipstick tube bolt size

    It would be very difficult, but not impossible, because of the tight spot. First I'd try getting a small punch and knocking it on the side to see if you could get it to turn 90 degrees, then pull it out with some needle nose. If that doesn't work, fill it with grease to catch the shavings and...
  16. nickpohlaandp

    Dipstick tube bolt size

    Jeez! What kind of **** stick would do that. So how are you supposed to check your oil? Did you buy it from a stealership?
  17. nickpohlaandp

    12.80 1/4 mile street tire run

    What is your mod list? Were you spraying it?
  18. nickpohlaandp

    Dipstick tube bolt size

    What side is your dipstick on? Mine was on the driver side, and I found no need to bend my dipstick to reinstall it after installation of the JBA headers. Yes, it takes some wiggling and patients, but it goes back in just fine with no interference if you just take your time. IIRC the bolt was a...
  19. nickpohlaandp

    12.80 1/4 mile street tire run

    That's a real impressive pass on street tires. What tire are you running?
  20. nickpohlaandp

    headers install

    No. The Y just fits like shit. It was a 6 speed Y on a 6 speed truck.
  21. nickpohlaandp

    headers install

    Headers fit fine, JBA's Y-pipe fits like shit. I wouldn't waste your money on shorties. Spend it elsewhere or get long tubes.
  22. nickpohlaandp

    Vararam install question

    Negatory. When you pulled the hard plastic tube out, where that tube hooked up on the driver side rear of the engine was a rubber 45 degree thing. That's what the filter goes into, and it should have a little hose clamp to hold it on there and prevent it from falling off.
  23. nickpohlaandp

    Vararam install question

    I don't have a direct picture of it, but here's kindof an idea of where the little filter should go (arrow pointing)
  24. nickpohlaandp

    Vararam install question

    Did you buy that from me? It's a little chrome filter that looks like one you would push in an old Chevy 350 valve cover instead of a PCV valve. It mounts on the rear of the intake manifold, driver side, to where that long tube used to be connected to.
  25. nickpohlaandp

    Dyno # guess

    392 Bob

Latest posts

Staff online

Members online

... and 19 more.
Total: 1,284 (members: 69, guests: 1,215)
Robots: 1,377

Forum statistics

Threads
195,400
Posts
2,869,746
Members
156,068
Latest member
shadow338

Share this page

Top