Search results

  1. W

    Inez Hotrods 4/6 Drop

    I used some washers from my scrounge bucket. It makes sense there would be extra space since the brackets attach on the outside of the OEM brackets but included washers would have been cool
  2. W

    TotalFlow mufflers, nice price or crack pipe?

    Corrosion seems like a non issue at 5 months. Ask me in a year lol
  3. W

    TotalFlow mufflers, nice price or crack pipe?

    It's not bad for the price. I paid like 100 on Amazon for the direct fit 14. To get most of the exhaust leaks to go away I had slide it everything further on to the oe exhaust, ultimately pulling the tips further under the bumper. One slightly more than the other. One day I'll probably get it...
  4. W

    Belltech 2/4 into 4/6 rear end bottoms out

    Yes and get the cut kit. The no cut kit will still bottom out in the same spot. Might as well get the control arms while your at it. Honestly you might as well get the whole Inez kit. I'll be honest here I was expecting more from my inez kit. However it's the best kit available for us. Wish I...
  5. W

    Lowered life problems

    Dang, what drop and shock?
  6. W

    Inez Hotrods 4/6 Drop

    Yeah I guess I should have worded it better. At stock height with cut brackets, the arms would be lower than factory. I just wanna make sure that wouldn't cause any issues. I also don't know what that would do with pinion angle. I will probably never run the truck stock height again. But I'm...
  7. W

    Inez Hotrods 4/6 Drop

    I'm assuming you mean with their brackets and not welding on some factory located brackets. Well this may seal the deal. About how much actual suspension travel is there when the factory brackets are removed and replaced. I guess I only care for up travel. On the 4/6. I'm wondering if I'll...
  8. W

    Inez Hotrods 4/6 Drop

    I'm considering purchasing the inez 4/6 drop kit. But if I were to sell the truck and wanted the option to go back to stock height, would there be any issues or negative effects using the rear control arm brackets that come with the kit? At stock height.
  9. W

    Standard length shocks with 2/4 lowered springs

    I'm running factory shocks at the moment (about a year, I'm a procrastinator). However, I wouldn't recommend it. If I lift the truck allowing the rear axle to fully extend I can pretty easily wiggle my springs out. So if the rear ever gets air born on a bump or something it is possible for me to...
  10. W

    Tradesman to sport bumper conversion

    Hey guy's, I'm wondering if anyone has upgraded their tradesman or slt to the sport front bumper. I know it might be exspensive but I really would like to upgrade. Has anyone done it? How long did it take? Estimated total price? Parts list? Any help is greatly appreciated. I wanna do this, and I...
  11. W

    Lowered 4th Gen Pics - Show Em Off!

    Thanks! Yes they are sst wheels. I wanted the machined finish but these still are the only set I've come across near me, and they were in horrible condition. So I had them powder coated. I put the stock 265 70 17s on and they fit pretty good imo
  12. W

    Lowered 4th Gen Pics - Show Em Off!

    Had these powder coated a while back, just got them on today. Kinda gives me an old muscle car vibe with these wheels.
  13. W

    Strictly the 4x4 lowering thread...

    Lol I think this exact same thing every time I come to the lowered section.. Even tho I don't have a 4x4 I check in here just cause it's always at the top..
  14. W

    starting my drop project soon.......parts are on order

    just read all 22 pages. very informative thread! cant believe I just now found this. I will be subscribing.
  15. W

    Inez 5/7 Kit With Illicit Brackets Installed

    Well shucks! I guess I'll have to wait! If you don't mind let us know what you do for the brake conversion. It seems like that opens a lot of doors for wheels and tires
  16. W

    Inez 5/7 Kit With Illicit Brackets Installed

    Hemi450hp, is there any way you can throw a 28 drag radial or track wheels on it with the 5/7 drop? I wanna see how it looks track ready!
  17. W

    Reset bolt on record: 7.935 @ 86.99

    Good run! I'm hoping I'll get some good da the next time I get to go to the track! I can't wait to actually start upgrading mine..as of now I'm living vicariously through everyone else..lol
  18. W

    2014 8sp - 12.41 @ 109.44MPH N/A

    I havnt looked too deep because I hadn't really wanted to remove my tailgate yet. But as far as the back up camera wires are they a pain? Or have I just not found a simple plug yet? Also, if I'm on the shitty stock goodyears that come on the 17s wouldn't removing weight over the rear tires be...
  19. W

    2014 8sp - 12.41 @ 109.44MPH N/A

    I can't wait for next year. I'm hoping there will be more trucks in my area to race at the track! So all these things y'all are removing to get the weight down, about how long does it take to remove and put back on? I'll have to drive mine to work Monday morning! Lol
  20. W

    2014 8sp - 12.41 @ 109.44MPH N/A

    Congrats! Awesome run. Can you give us some insight on how you got her down to 4600? I weighed my bone stock tradesman 2dr at 4920. I don't know how the hell I'll get 300lbs out of it! Well I did have a full tank of gas so maybe 60 pounds will be pretty easy lol..thanks for any advice!
  21. W

    4th Gen Official Timeslip/Discussion Thread

    14.336 @ 95.33 - 2016 1500 RCSB 2WD 5.7L - N/A - Walker345 - 09/23/2016 60ft. 2.056 330. 5.975 660. 9.191 @76.84 1000. 11.973 1/4. 14.336 @95.33
  22. W

    12.80 1/4 mile street tire run

    That is good to know. What shocks? I'm assuming the nicer belltech ones. I bought my kit without shocks. Mostly because I couldn't find a clear answer as to what lasts/feels the best and performs on the strip..
  23. W

    12.80 1/4 mile street tire run

    Wow ok. I figured our 2/4 belltech would hurt more than anything. Glad to know my street drop won't hurt me when my goal is high 12s!
  24. W

    12.80 1/4 mile street tire run

    Nice run! What suspension setup?
  25. W

    Moe's 8sp build - [email protected]

    I'm wondering if a drive shaft should be my first mod..mine is my daily, and I'm having a very hard time convincing myself to buy go fast parts knowing it's probably gonna happen if I keep racing..if there is a group buy or the possibility of a group buy soon let me know I'll save the cash I...

Latest posts

Members online

Total: 1,324 (members: 49, guests: 1,275)
Robots: 1,344

Forum statistics

Threads
195,406
Posts
2,869,844
Members
156,074
Latest member
Francisco50

Share this page

Top