Search results

  1. E

    Tappet Cover Gasket

    I have a 2001 Dodge RAM with a Cummins 5.9L 24V truck. I am in the process of replacing the tappet cover gasket due to an oil leak. I bought a new gasket and am trying to make sure I place it on the cover correctly. The gasket has a grove which fits over the edge of the tappet cover. My question...
  2. E

    Error Code P0237 Question

    I started getting a P0237 error code (boost pressure low) and check engine light. After doing some reading I am getting that the 0237 actually relates to a possible bad MAP sensor. But there is a 0107 code which is MAP Sensor Low. Any thoughts on this error code? Also, Does the 0237 set...
  3. E

    Error code 0237 Boost pressure low

    The error code is a P0237. I found the Cummins forum and will try the question there. Thanks!!
  4. E

    Error code 0237 Boost pressure low

    I started getting a 0237 error code and engine maintenance light. After doing some reading I am getting that the 0237 actually relates to a possible bad MAP sensor. But there is a 0107 code which is MAP Sensor Low. Any thoughts on this error code?
  5. E

    Will Not Start after Manitanance

    Had to take a break for work but I am back trying to start my sons truck again with no luck as yet. Now when I try to start the engine I am getting white smoke out of the exhaust. Is the white smoke progress???
  6. E

    Will Not Start after Manitanance

    Gents, Thanks for all the past help. Had to take a break from the truck but we are back trying to get it working My son pulled the injector pump out again and found the key to be a bit buggered up. So, we are looking to replace the key. The pump part # is R5019658AD and that comes up as a...
  7. E

    Will Not Start after Manitanance

    Thanks for the input. Still working the problem. My son pulled the injection pump out again and the key on the pump shaft is a bit buggered up. Also, I noticed the arrow on the top of the key was pointing towards the pump and I have seen pics showing the arrow pointing toward the end of the...
  8. E

    Will Not Start after Manitanance

    Dudeman2009, thanks for the input No he did not bleed and prime the fuel system. So yesterday we did that and still no starting. The procedure used was 1) open the nut on the fuel inject pump and bump the starter until fuel comes out. Then tighten the nut. 2) Loosen the nuts on the injectors...
  9. E

    Will Not Start after Manitanance

    Many thanks in advance for any help!!! I don't know much about diesel engines, but I am hoping to help my son with his. My young son has a 2001 Ram 2500 with a Cummings diesel. He has attempted to fix a tappet cover oil leak which as most probably know requires taking out quite a few parts...

Latest posts

Staff online

Members online

Total: 1,285 (members: 49, guests: 1,236)
Robots: 1,483

Forum statistics

Threads
195,435
Posts
2,870,224
Members
156,128
Latest member
CRD_Ram

Share this page

Top