Search results
-
Transmission Expert Needed
Just pulled DTC The power steering thing and evap codes I know about....don’t care about evap codes as we don’t have emission I have power steering switch have just been lazy about installing- HEMIxHAMMER
- Post #5
- Forum: Engine & Performance
-
Transmission Expert Needed
Rough estimate 5500 -5750 lbs I’m gonna go back today and double check any codes I may have and will report back in 30 minutes or so- HEMIxHAMMER
- Post #4
- Forum: Engine & Performance
-
Transmission Expert Needed
04 Ram Quad Cab 4x4 5.7 Hemi 84k miles 545 Rfe trans ?? Situation: My truck runs great, perfect in fact right up until I tow my boat. I can be driving along and the trans will try to shift and get hung in 3rd gear....if you put in reverse it will not move/no throttle Pushing gas pedal does...- HEMIxHAMMER
- Thread
- Replies: 5
- Forum: Engine & Performance
-
2 Part Auestion, Trans temp and Brakes
04 Ram 5.7 Hemi 82k Miles Recently bought a 24’ boat and tandem aluminum trailer, while pulling it home My trans temp got to about 212 and it got stuck in second or 3rd gear hard to tell which. If you shut the truck off and start it back put it into drive or revers the accelerator pedal is...- HEMIxHAMMER
- Thread
- Replies: 0
- Forum: Towing & Hauling
-
Oil Pressure Demon
You WILL need oil pan gasket, timing cover gasket, water pump gasket and crankshaft/timing cover seal , all that stuff has to come off to get to the oil pump, pretty much entire front of the motor has to come off, removing the radiator and trans cooler, power steering cooler etc is By far the...- HEMIxHAMMER
- Post #6
- Forum: Engine & Performance
-
Oil Pressure Demon
So I got it fixed, figured I’d post in case anyone else has this problem First off - Something to think about I HAD THE MANUAL GAUGE AND SWITCH FOR DASH HOOKED UP AT THE SAME TIME, EVEN AT 4 PSI OF OIL PRESSURE ON MANUAL GAUGE THE DASH GAUGES STILL SHOWS IS OK!!!!! So you may have a problem...- HEMIxHAMMER
- Post #3
- Forum: Engine & Performance
-
Oil Pressure Demon
Hey Gents, Got an oil pressure demon need some advice from the pros 2004 5.7 Hemi 81k miles Owned the truck for 2 years Regular oil changes I don’t drive the truck often as I drive service truck, HERE GOES recently my oil pressure gauge would drop and “check gauges” would come on Shut truck...- HEMIxHAMMER
- Thread
- Replies: 5
- Forum: Engine & Performance
-
Post up your White Ram's !!!!!
LARAMIE !!!!* Auto correct Sent from my iPhone using Tapatalk- HEMIxHAMMER
- Post #592
- Forum: Photos & Videos
-
Post up your White Ram's !!!!!
Here's mine 2004 Lariat HEMI 6" Lift 35's Sent from my iPhone using Tapatalk- HEMIxHAMMER
- Post #588
- Forum: Photos & Videos
-
Cheap, Easy & Cool
Well an update from exactly 1 week later ....instead of white the color is now like a "cream" color or off white Not happy .....will be pulling it off .. Looked good for first set of pictures lol Sent from my iPhone using Tapatalk- HEMIxHAMMER
- Post #19
- Forum: 3rd Gen DIY
-
"Log" Headers ???
Appreciate the input I'm gonna pass on those log ones. Guess the hunt begins again Thanks Sent from my iPhone using Tapatalk- HEMIxHAMMER
- Post #8
- Forum: Engine & Performance
-
"Log" Headers ???
"Log" Headers ??? I already have a flowmaster cat back system and an intake HEMI fever tune I saw those today and saw they went for 600$ plus and thought "wow what a deal" but guess not so after all... After doing more research jba shortys can be had for another 125$ guess I'll go...- HEMIxHAMMER
- Post #4
- Forum: Engine & Performance
-
Curved Led Bar In Bumper
I used the brackets that came with the light bar...I just bent the pieces that are supposed to mount to a flat surface at the angle of bumper bracket holes lined up and bolted it together Sent from my iPhone using Tapatalk- HEMIxHAMMER
- Post #10
- Forum: Exterior
-
Curved Led Bar In Bumper
Don't have a pic w them off but here's a good comparison of led vs halogen...will try to take more in daylight tomorrow Sent from my iPhone using Tapatalk- HEMIxHAMMER
- Post #7
- Forum: Exterior
-
Curved Led Bar In Bumper
Thank you ! Trying to keep it simple and clean I installed the 3" cube LEDs in fog light spots today very happy with them as well Sent from my iPhone using Tapatalk- HEMIxHAMMER
- Post #5
- Forum: Exterior
-
"Log" Headers ???
I have the option to buy a set of Gibson gp311s-c Log style headers for 225$ on local Craigslist. I've searched and found 1 post on someone using them and he wasn't too impressed with them but I don't want to form an opinion on one review.... So I'm hoping some of y'all may be able to offer up...- HEMIxHAMMER
- Thread
- Replies: 9
- Forum: Engine & Performance
-
02-05 halo headlights, 02-06 led tail lights
Third brake light led as well ? Smoked ? Sent from my iPhone using Tapatalk- HEMIxHAMMER
- Post #16
- Forum: For Sale
-
Curved Led Bar In Bumper
I've seen couple guys using the removable cover space to mount light bar but I've seen straight ones... I mounted a 42" curved one off eBay and it follows the radius of the bumper pretty closely Thought I'd share for anyone else curious Took me about 2 hours +- Easiest to take bumper off...- HEMIxHAMMER
- Thread
- Replies: 10
- Forum: Exterior
-
Kicker Shock for 6" Lift
I've found a couple Srt forums where those guys swear by it ...idk I have it so I'll replace it ...may drive around with out before I install new one to see if I notice any difference- HEMIxHAMMER
- Post #10
- Forum: Lifted
-
Cheap, Easy & Cool
Yeah with my truck being white I felt the tires needed some contrast in halo with how it came out. The pen I used I got from O' Reilly's Duplicolor Hot Tires I have no idea how long it lasts I'm assuming just like anything else prep is 90% of the quality I let it cure for 24 hours...- HEMIxHAMMER
- Post #16
- Forum: 3rd Gen DIY
-
Kicker Shock for 6" Lift
Ok so update for whom ever wants to know Apparently these came factory on the Srt Rams or at least the Reg Cabs, I think for those of us who run lift kits most trucks now use ladder bars or lateral Track bars to prevent rear axle play forward/reverse. I guess the guy I bought truck from...- HEMIxHAMMER
- Post #7
- Forum: Lifted
-
Cheap, Easy & Cool
Painted tires ....the weather ...apples to apples lol I hope the paint lasts til the weather is warmer True test It's still stupid cold here too but the snow only lasted a day but schools are still closed tomorrow- HEMIxHAMMER
- Post #13
- Forum: 3rd Gen DIY
-
Cheap, Easy & Cool
Yeah but like usaf2006 said It'll be 110 outside .....for what seems like forever- HEMIxHAMMER
- Post #11
- Forum: 3rd Gen DIY
-
Cheap, Easy & Cool
Yeah well 16 here is cold , we got 1" of snow and everyone thought the world was ending ... Georgia weather....gonna be 60 by Wednesday- HEMIxHAMMER
- Post #7
- Forum: 3rd Gen DIY
-
Cheap, Easy & Cool
They have a bunch of colors , green, orange , red pretty much everything. This morning when I fired up the truck it was 16 outside ...- HEMIxHAMMER
- Post #5
- Forum: 3rd Gen DIY
Members online
- 18Delmonico
- barbu77
- dsherman26
- RebelDad
- OrangeCrush
- David H
- Grond
- DILLIGAF
- 2003F350
- Black-Wolf
- Fatbob Frank
- KansasArt
- Mike Townsend
- Reb87
- skuppy069
- Murphy Slaw
- MikeinOH
- Nuqmatti
- Lsujker
- Treburkulosis
- ragarm33
- Beaniam
- Kuhndog970
- PolarisCobra
- ClarkR
- Warlock2024
- lcrrick
- BenchTest
- LouGarbo
- wellsj89
- SitKneelBend
- RangerWeaver
- 4xdad
- Heatheroo
- DanAR
- Team Horner
- Ludville1
- white17ram
- Gundog3500
- RKnea
- CRB357
- cityboy21
- 1SLwLS1
- duckman631
- max2bob
- Trashonthursday
- nlambert182
- Defuse