Search results

  1. DonnyP

    Navigation Maps Update Canadian Truck

    A friend of mine recently purchased a 2017 Ram 1500. They are planning a trip to Florida and they are trying to update the Navigation maps on their Uconnect radio. They have already purchased the maps for it but they are having a hard time getting it to update. I believe its a package that came...
  2. DonnyP

    New Headlights, Need Ideas

    I'm going to replace my current retrofitted set of OEM Projectors with a pair of AlphaRex lights. Just have to figure out which style I want to go with. Either way the low beam projector will be getting swapped out with a quality HID projector (D2S 5.0 or G5R). If I go quad projector...
  3. DonnyP

    WTB! Carven 5" Black Tips

    I'm looking for a set of the older style Carven Black 5" tips. In good condition. I currently have the older style that are polished. Black would just flow better on my truck.
  4. DonnyP

    Parking Light Out

    I've had a parking light out message for a couple months now. I have recon LED tails and retrofitted headlights. My truck came factory with LED tails and projector headlights. When I did my retrofit I added Diode Dynamic switchback boards and cut out the factory side parking light. I thought...
  5. DonnyP

    Cargo Cam Third Brake Light

    I just came across one of these and purchased it. Found one for $50 at a junkyard. Part grade was a B so hopefully its not in too bad of shape. Planning to paint it to match my truck and install it. Hope it all works out because that is a screaming good deal.
  6. DonnyP

    LED taillight harness

    I currently have 3 set of LED tails from my truck sitting in my basement that I'm stuck with. I had to reuse my tail light harness with my current set installed now. I now have no harness to include with the other lights, so me selling them is extremely hard as most people want the harness to...
  7. DonnyP

    Retrofitted headlights halos and c-bars

    In the process of finishing up my build. I have yet to install the halos and c-bars onto the shrouds. I have the diode dynamic switchback halos. do I leave them off or install them? Leaning more towards leaving them off?? How lights currently look How lights will look finished.
  8. DonnyP

    Halo's and C-bars

    Has anyone here install Diode Dynamics Halo's and C-bars on their projector headlights? I'm looking to mount mine but can't quite grasp the best of going about doing it. Getting them lined up around the shroud itself is a bit goofy, along with the c-bars. How did you attach them, fishing line...
  9. DonnyP

    Vinyl matching paint color

    My paint code is PW7 (bright white) I want to vinyl wrap my mirrors and door handles too match my truck. Has anyone done this yet on this color and had their vinyl match closely? I got some 3M1080 Bright White vinyl but in direct sunlight the color looks way off. Any other time, it almost...
  10. DonnyP

    Fury Country Hunter RT's

    Does anyone here have any experience with the new Fury Country Hunter RT tires at all? Looking into getting these in a 37x13.50r22 size.
  11. DonnyP

    New Rim/Wheel setup!

    Now that my truck is lifted roughly 8" all around, the 20x10's w/35's I'm running now are looking too small. I sold my old setup for a decent price and now I'm looking to upgrade. Going with 22x12's with 37" Fury Country Hunter RT's. Anyone have any issues with rubbing at all with a setup...
  12. DonnyP

    Popping/Clunking Noise when turning

    Just lifted my truck with a 6" zone kit about 3 months ago. I previously had my Bils @ 2.8" with a 1" rear spacer. I lift those as is and installed the 6" kit on top of it. When I was leveled I never noticed, nor had this issue. Couple of days after lifting when backing into my driveway and...
  13. DonnyP

    Headlight Retrofit Progress!

    I believe its 15 minutes @ 250 degrees, correct? Then remove and use a screwdriver and an opening pliers for about 5 minutes or so, then place back in oven to resoften again? I guess while working on one, you could have the other one in and have it ready to go when you need to switch them. To...
  14. DonnyP

    Diablosport Intune I2

    i can pick one up with all accessories and the box for $100 I would just need to get a new license for I think $149. Seems like a great deal. Thoughts on this unit? Do I pull the trigger on it?
  15. DonnyP

    Door Handles

    Do I need to remove the entire door handle from the truck to get the outer chrome shell off of it? I had it half off the handle earlier but couldn't get it to release from the side that stays stationary when pulling the handle. I'm guessing its screwed in from the backside to hold it on? I'm...
  16. DonnyP

    Hellwig Sway Bar

    I can get the Hellwig Sway Bar kit (Part#7883), for trucks lifted 4-6", for 225 shipped. It's a pretty decent deal. Would this make a huge difference for my lifted Ram 1500?
  17. DonnyP

    6" Zone Lift, Installed!!!!!

    I can get the 6" Zone lift, with 5" rear springs and nitro shocks for a pretty good deal. ($1,200) Do I pull the trigger? I currently run Bils @ 2.8. I think I would drop them to 2.1 and run it with the lift. I also upgraded stock UCA's to the Mevotech's Also does this lift come with rear...
  18. DonnyP

    Adams Polishes Mystery mini bucket

    Just received my Adams polishes Mystery mini bucket, its my second mystery bucket in about a month or so. Scored very well on this one. The Mystery bucket contained: - Interior Trim and Lug Nut Brush - 4 spray nozzles - Foam Applicator Pad - Sticker - Premium Microfiber Wash Sponge - VRT Vinyl...
  19. DonnyP

    TPMS sensors

    I'm receiving some OEM sensors that I ordered off of Ebay today for my rims when they come in. Is their anyway for me to test these sensors before installing and mounting everything to the vehicle? It would suck to install and mount tires and setup on the truck to find out I have a bad sensor...
  20. DonnyP

    Adams Polishes Mystery Bucket

    Just had mine delivered. Excited to open it. First ever mystery bucket I purchased.
  21. DonnyP

    Headlight retrofit!!

    Finally received the parts to get my headlight retrofit going. -FXR 3.0 projectors -XB5500k D2H bulbs -led switchback boards -morimoto butyl tape -brackets Still need to get the clear corners. Looking to paint to match as well. Maybe a two tone, still undecided. No halos or C bars here...
  22. DonnyP

    Ordering wheels today! Thoughts?

    Going to try and not confuse anyone here lol. I'm going to be ordering my wheels today, the wheels I want are finally back in stock. I just can't decide between which ones I want. They will be going onto a bright white truck so I was thinking bronze/gold to be a bit different than the rest of...
  23. DonnyP

    De-badge or plasti-dip

    I need opinions. Do I completely debadge my truck or plasti-dip them black? Keep certain ones only and plasti-dip them? Thoughts. I’ll try to add a pic. Using iPad now.
  24. DonnyP

    Driver Side Seat Repair

    I just noticed last night that my driver side seat upholstery is falling apart. I have a Ram with the heated and cooled seats, so my seats are vented. The lower seat cushion, the stitching that runs along towards the front of the seat, is letting loose. So now that seam is pulling apart. Any...
  25. DonnyP

    Chrome bumper and grille to Color Match

    I was qouted $350 from a reputable local shop here to color match my chrome grille and bumpers. Anyone have this done and have zero issues? I've read that you have to do a lot of touch ups or resprays and that painting chrome isn't the easiest of things to do. I also don't want to spend 2 or...

Latest posts

Staff online

Members online

... and 10 more.
Total: 1,356 (members: 60, guests: 1,296)
Robots: 1,859

Forum statistics

Threads
195,611
Posts
2,872,519
Members
156,431
Latest member
5ccarter3

Share this page

Top