Search results
-
B
1985 Dodge Power Ram W150 steering
I did mine the cheap way picked up a lower steering shaft with a ujont in it from a late 90s Tahoe shorten my stock shaft carefully ground flats on each side to slide it together and clamped the u joint to the steering box input shaft cost a whole 12$ for the lower shaft off the Tahoe when I... -
B
NP 435 Clucth Kit help
I also had an issue with my granny tranny clutch . the first clutch I bought was a 10" didn't fit went back and got the 11" and a new flywheel which wasn't recessed the old one was worn about 5/8" deep into the flywheel ck out a new flywheel to see if it is also recessed mine wasn't on a la 360... -
B
La cam or not
Yeah I just found one at Edelbrock web site I have a set of jet drill bits to work with and another set of the same jets in case I'm wrong it's worth a try right? If nothing else it will eliminate being to lean Sent from my Z832 using Tapatalk- Bill1982
- Post #13
- Forum: Engine & Performance
-
B
La cam or not
Well not to many replys on those how about this one I have a new Edelbrock 600performer carb on my 360 what main and secondary jets should I be running?it's a stone stock motor with the stock single exhaust pipe.im thinking I'll try going richer to combat the spitting back thru carb issue the...- Bill1982
- Post #11
- Forum: Engine & Performance
-
B
La cam or not
I've cked the rockerarms to be little loose when valve is supposed to be closed no issues there which means the new stock pushrods are also right length Sent from my Z832 using Tapatalk- Bill1982
- Post #10
- Forum: Engine & Performance
-
B
La cam or not
I have tried turning the dist 180* it wouldn't run just backfired and boomed out the exhaust I'm positive I've got it in time here's a question the the installed height on the valve springs is 1.437" the brand new heads are set at 1.750 which would make less tension on the seat could the valves...- Bill1982
- Post #9
- Forum: Engine & Performance
-
B
La cam or not
That's one question down I've seen the space in other 360s also Sent from my Z832 using Tapatalk- Bill1982
- Post #8
- Forum: Engine & Performance
-
B
La cam or not
Is there a difference between 2bbl intakes and 4bbl intakes?I noticed the 4bbl intake doesn't really match the heads in the center exhaust crossover port the port is sealed but the space above it isn't there's nothing that I can see the space is for it's shaped like a half circle Sent from my...- Bill1982
- Post #5
- Forum: Engine & Performance
-
B
La cam or not
I've installed the dist in every position one tooth at a time even changed the dist back to the old one no change Sent from my Z832 using Tapatalk- Bill1982
- Post #4
- Forum: Engine & Performance
-
B
La cam or not
La cam or not Hey it's bill1982 I can only answer back before and after work and on weekends I've got this site on alert on my phone u won't blow anyone off but I've got to bring momma home the bread or she won't let me play thanks for understanding. Bill1982]- Bill1982
- Post #2
- Forum: Engine & Performance
-
B
La cam or not
Hey guys I just registered here I'm looking for some info on my Dodge la 360 engine I read in an old motors manual that it's possible to put an early non la cam into my la engine I've had this truck for 2yrs now the motor is newly rebuilt it has a constant pooping back thru the carb that I...- Bill1982
- Thread
- Replies: 12
- Forum: Engine & Performance
Members online
- G-Ride990
- NorCalCB
- HEMIMANN
- Jim BB
- RamBoss316
- ILLXJ
- U&A
- 18Aries
- RamDiver
- Ramulus
- seems fishy
- KalboKalbs
- olyelr
- Flip-er
- BucketGruntJL
- Curmudgeon
- Madeury
- tjfdesmo
- Jeff Colorado
- Scrapman
- KYPOTLICKER
- BriannaSTILLEN
- diymirage
- 09SilverRam
- Dodge trucker
- Matt9989
- CanRebel
- Griffin
- tsc74
- TowerMonkey
- Atcer2018
- bballard
- PDub72
- Wild one
- Pakkratt
- Quick_Shifter
- MikeG
- rzr6-4
- gilleydog
- netshadoe
- Dredger
- mrack
- fbrain
- 15limited
- armyvet25
- s_wall98
- teddy Charlery
- Cjcg29
- HemiFanatic24
- quietpeen