Search results

  1. S

    Penzoil sale

    On sale at Canadian Tire right now. Here on the east coast at least
  2. S

    What grease/lube for power running boards?

    Have had mine going strong for over 10 years (knock on wood). I've always sprayed the bushings with silicone spray on a regular basis (I think I had seen that in a maintenance section for them at one point), especially before the winter as I'm on the east coast and they salt the **** out of...
  3. S

    Rough Country 6" 'wheel clarification'

    Yup those are 17's, same specs you're looking to install. One thing I'll note, the beefier TTX tie rod ends wouldn't clear when I tried to install (rubbing the wheel weights)
  4. S

    65RFE to 8HP70 Swap , Lifted Truck Edition!

    I'm sure he'll get it dialed in. I was wondering if a Quicklearn could be done after the swap with Alfa, good to know now that it can't.
  5. S

    65RFE to 8HP70 Swap , Lifted Truck Edition!

    Wicked! How does it like those 4.56's? Lol JBA crossover isn't too close is it? Just wondering if there would be much of a difference between them and my ARH as far as clearance goes I'm ashamed to say my 8 speed is still sitting in the garage, just trying to kill the ol 5 speed
  6. S

    Anzo Taillights

    Lol ok that's reassuring, you had me second guessing there. My lights just showed up yesterday, probably won't get a chance to install them until after Christmas. May add a light layer of Lamin-x film too even though they're already smoked but we'll see. Glad you're liking them!
  7. S

    Anzo Taillights

    That does seem a bit strange. Thought it was weird they couldn't provide a clip of their lights in action either when I inquired
  8. S

    6.4 intake manifold swap

    Yeah that's what I'll probably end up doing. Have the HP Tuner and have been meaning to get a tune from FRP for a long time anyway
  9. S

    6.4 intake manifold swap

    Good stuff. Just ordered both, but manifold on backorder 6-8 weeks of course. Does anyone know a source for the injector spacers in Canada? MMX are smoking crack with their shipping rates. Otherwise I'll have to tune for the 6.4 injectors I guess
  10. S

    Anzo Taillights

    Yeah that's what I like about them. Sounds good, I bit the bullet on them too today while sales were still on. But I won't get to install them for a few weeks or more as I'm away for work
  11. S

    Anzo Taillights

    Those were the other ones I was looking at, how do you like them?
  12. S

    Anzo Taillights

    Lol yeah seems like majority aren't a fan of amber either, but I like it a lot better for some reason
  13. S

    Public Service Announcement - Cardone CV Axels

    Well ****, seems like a roll of the dice with non OEM
  14. S

    Anzo Taillights

    Does anyone have first hand experience with these? Wasn't able to find much, as far as videos or anything. I like that these are amber compared to most of the other 5th Gen styles...
  15. S

    How to Fluid Film your truck

    The regular stuff is dirty enough when you have to work on anything underneath, can only imagine how dirty the black stuff must be
  16. S

    Correct oil filter or not?

    No you're good. A lot of us run the 20-820, just that some guys apparently had clearance issues and needed to run the slightly smaller 10-48
  17. S

    Public Service Announcement - Cardone CV Axels

    https://www.ramforum.com/threads/garbage-trakmotive-ch8256xtt-xtended-travel-cv-axles.194007/ Ian didn't have much luck with the extended travel and went back to the Cardone HD's. I have a set of each NIB and am debating which to go with when I install the new lift lol
  18. S

    Comparing Mevotech UCA's

    I have the TTX and they have been fine for a couple of years now with my lift. I do know a lot of other guys on here have run the cheaper ones when they installed a level with no issues either
  19. S

    Intermediate shaft bushing mod

    Same thing I did, then installed a band clamp afterwards for a little extra insurance
  20. S

    8 Speed Swap Diagram Help

    Are you on FB? A lot more guys have done the swap on there and may be able to help out too (High Performance Rams, OnlyRams)
  21. S

    Blackstone - used oil analysis

    I'm in NL and ordered from Can West Transmission in Edmonton for $12.80 each. Change my oil annually so wasn't hard to justify a half dozen. Still a lot cheaper than Redline, especially when I couple it with the PUP when it goes on sale
  22. S

    Ram 1500 2012 reverse camera?

    https://www.amazon.com/gp/product/B01N8YO8JE/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 This is what I used for mine
  23. S

    Would like to lose 2 inches on my BDS lift

    Which notch is your Bils set to up front? And do you know if you have the 3" or 5" rear coils in the back? I'm assuming 5 but 3 is an option with the 6" lift as well. But yes you can swap out a few components to achieve the 4", as most of the parts on both kits are the same. I know BDS do sell...
  24. S

    Jack stands

  25. S

    Do you use anti seize or impact drill on your lug nuts

    https://www.youtube.com/watch?v=D_PAdbNHzRw Anyone use torque adapters?

Latest posts

Staff online

Members online

... and 21 more.
Total: 1,252 (members: 71, guests: 1,181)
Robots: 1,774

Forum statistics

Threads
195,484
Posts
2,870,885
Members
156,202
Latest member
jdbird93

Share this page

Top