Search results

  1. D

    Mid 90s magnum in 89 help

    Okay yeah definitely wanna get a nv4500 later but I couldnt pass up the deal on that 4 speed (400$ for everything needed to convert it minus the cluth itself) but the truck was throttle body injected before that why I was wondering bout the regulator with the electronic fuel pump
  2. D

    Mid 90s magnum in 89 help

    Hey so it been a while since I been on here but lot has changed. So the trucks been taken apart and swapping the tbi 318 for a mid 90s 360 magnum and the auto for a 4 speed. I got the motor couple years back for the heads. As u guys know shit happens and plans change. Haha. The motor was...
  3. D

    LMC Finally !

    Hey guys im not sure if you all already know or not but i just found out that lmc is finally gettin a magazine for 1st gens and ram chargers. Website says not till spring of 14' though. But i Just wanted to give everyone a heads up I tried to order one now but it wouldnt let me maybe only...
  4. D

    v6 tune up

    thanks dodge dude thats what i figured but i thought i would ask everyone just to make surr and its not smooking or anything so il worry bout that plenum gasket when it starts to act up haha
  5. D

    v6 tune up

    i know this is mostly full size trucks on here but i was hoping you guys could sstill help me out. i recently purchased a 94 dakota with a 3.9 v6 (2wd 5 speed) as a gas saver back and forth to work and im gonna do a full tune up, cap rotor plugs wires and filters. any suggestions for the...
  6. D

    Air Intake

    I had a 14x3 on my 2nd gen 360 and have a 14x5 on my 89. No real noticeable gain in power or mpg but mades the whistle of thottle body nice and loud. I love that sound
  7. D

    Steering parts

    My tie rod ends need to be replaced but they are realy rusted and was wondering if anyone knew where i could the rod that conects them. The guy at napa told me best bet was to just get one from junk yard. Also this is my everyday driver right now and dont plan to get rid of it any time...
  8. D

    Adding an Extra Leaf for Lift

    Just talked to him and what we did was just add it between two existing springsa and placed new U bolts in
  9. D

    Adding an Extra Leaf for Lift

    Maybe he took one out and just placed the stronger leaf in te middle ill ask him and let ya know
  10. D

    Adding an Extra Leaf for Lift

    Idk i didnt actually instal it my self my uncle bought the truck brand new and installed it in back when he bought the truck but ive help a buddy of mine do it to his 98' and it jacked his back en up bout and inch. Me personaly i dont like them cause it stiffens the ride up so much. I wanna...
  11. D

    Adding an Extra Leaf for Lift

    No you actually separate the leafs and place a stronger one in the middle of ur current leafs. They stiffen the ride though makes it ride rougher i have adda leafs in the front and rear of my 89 and clears 33 12.50s idk what you goin for though.
  12. D

    Blue dash lights

    Just ordered 4 pack of blue led strips off amazon like 12$$ and the have sticky tape attached to theem so they just stick on
  13. D

    Lookin to buy need advise

    It is a mess lol talked to guy down to 500 and im jut gonna part this thing out. Had some extras on it that i can sell locally and a couple ppl that re freinds of friends. Hopefully make a ciuple bucks. Thanks for all ur help though guys
  14. D

    Lookin to buy need advise

    Yeah chuck thats what i was thinking too. Im gonna go look at it tommorow and ill let ya guys know if its as good as it sounds or just a hunk. But say it was nv 3500 would a nv4500 bolt right up? or what i need a new bell housing or other parts?
  15. D

    Lookin to buy need advise

    Thanks i appreciate all the help youys think its a good deal though ot no??
  16. D

    Lookin to buy need advise

    Hey guys i found what i think is a deal but wanted some help and opinions from the guys that know best... Its a 97 1500 4x4reg can short bed 5.2 5 speed. 700$ man ssid the trans is bad but everything else is good. How do i know what trans is in it and how much would a junkyard one cost??? Any...
  17. D

    360 or 318

    Power steering pump most likely
  18. D

    Stalls low rpm runs great high rpm

    Hey guys. Lookin over everything real well i realized that a vacume line for the 4 wheel drive had broke sonit was jst a vacume leak.
  19. D

    360 or 318

    Thanks for that serioudly never thought of that
  20. D

    360 or 318

    Thanks guys thats what ive heard from other ppl too. So heres the plan haha. Im gonna put that 360 in for now. And build the 318 up some redo seals mild cam intake carb and headers and then ill put it back in.
  21. D

    360 or 318

    I currently have a 318 la in my 89 was thinkin bout putting a 360 magnum that i have in it. Bigger motor equals better right?? But i was wonderig if there aas anything i needed to know about it or if its even worth it.
  22. D

    Stalls low rpm runs great high rpm

    Yeahhh i have tried runnin high grade gas too
  23. D

    Stalls low rpm runs great high rpm

    4x4 1989 w100 5.2 tbi When i first take off or under low rpm on road bogs down or stalls sometimes even backfires and catch throttle body on fire Recently removed all egr air pump and pluged all air ports andd holes in exhaust. Checked timing tried running lil advanced or behind does it...
  24. D

    Noise from tranny when shut off

    It was from the trans he took it to a shop. They said it was a sensor that had something to do with the throttle and downshift. But thanks guys
  25. D

    Noise from tranny when shut off

    My buddy has an 04 cummins 4x4 and everytime when you turn the key off after it bein in the run position it makes a wierd clicking or grinding sound from the driver side of the transmission. Any ideas before i tell him to just take it to the shop. It runs and drives normal
Top