headers

  1. Just Bob

    Not quite DIY - Kooks Shorties - Go to a shop!

    Installed Kooks 35101110 Torque Series Shorty Headers today. Six hours in Mac's Custom exhaust. I had already modified the Y pipe at Mac's. I have to tell you, this job would be pretty tough without a lift. I tried. The previously installed Lyell's muffler (shown next to stock) cut a lot of...
  2. D

    Looking to make good power

    I'm picking up a 5.7 with 120k miles. I'm thinking of getting an intake, exhaust, hrt stage 1 cam w/lifters, long tubes, and high stall tq. Is there any supporting mods id need (gears, trans, etc)? I want to squeeze more power but still have a reliable truck. Rarely towing a jet ski, mostly...
  3. LaramieLimited

    Potential Header install on 2012 Ram 1500

    I've found a ton if great information in quite a few pinned threads, thanks to all of those that contribute to the wealth of knowledge here! I have a 2012 1500 Laramie that is sitting at 116k, I've had her since 5k miles, she has been a great truck. I have had to deal with the exhaust bolt...
  4. JCarr98Ram

    Studs for headers

    Hello, Wanted to see if some one can answer a question that I have. Currently, I am replacing my stock manifolds with JBA cat4ward headers. I am looking to buy some ARP studs for my 1998 dodge ram 1500 5.9L 360 engine,but they are giving me studs for a 5.9L cummins. Can I use the studs for the...
  5. E

    Flowmaster flow fx vs magnaflow

    Hey all, So I'm in need of a exhaust change. Currently on my 2013 ram 5.7 supercharged, I'm running arh long tubes with a catless y pipe. 3 inch to a single flowmaster super 10 which duals out to stock tailpipes with resonators deleted. I had a catalytic converter go bad, so I chopped them...
  6. J

    Shorties quieter than stock?

    Hi, I need some help and I hope there might be an explanation. I just got some BBK shorties installed (plz dont bash me about BBK I know they arnt the best and getting shorties, I had broken bolts) and they seemed to make my exhaust quieter? I had Flowmaster super 10 muffler and stock manifolds...
  7. S

    Is Cold Air Intake worth it?

    so I have a 2020 Ram 1500 Laramie Longhorn 5.7L eTorque. I just put in new hearders (aFe twisted tub Part Number:48-32023) and a new muffler MBRP XP series High Flow replacement muffler. so my question is with me do those modifications should I put in a Cold Air Intake or just stick with OEM...
    • SewerRat563
    • Thread
    • air filter cold air intake headers manifold miles per gallon muffler need suggestion performance
    • Replies: 32
    • Forum: Engine & Performance
  8. 70chall440

    2014 2500 5.7 header recommendations

    As the title says I have a 2014 2500 Big Horn with a 5.7 which has about 48K on it. I want to replace the stock exhaust manifolds with some shorty headers and am looking for recommendations. I am not necessarily after max HP gains insomuch as I want to fix the broken studs and gain a little bit...
  9. 0

    ARH Long Tubes with stock muffler?

    I have had hi-flow catted ARH long tubes on my truck with a full catback on my truck for a little over 2 years now and the sound is amazing but obviously very loud. Since installing, however, I've moved and the truck has become more of a daily work vehicle than a fun truck so I've been thinking...
  10. J

    Headers and Tune?

    Hello everybody I need some help. I’ve found conflicting info on the internet about headers and tuning. I have a 2017 Ram 1500 5.7 Hemi. Currently I have a K&N Series 77 cold air intake and Flowmaster American Thunder 3 inch tubing exhaust system installed. I am looking for headers but don’t...
  11. S

    Long tube headers, but need cats

    I recently acquired a 2012 ram 1500 W/5.7 Hemi. I’ve discovered it has long tube headers but no cats. I’m not 100% sure what I’m getting into here because it seems like it’s been tuned or reprogrammed. There’s no cats and no check engine light although a dealers scan tool can find codes for...
  12. SilverSingleCab

    Headers and Tuning

    Hey guys, So I got my Ram ('19 Tradesman RCSB Hemi) back in January. So far the only modifications I've done are a Flowmaster FlowFX muffler and rear 2" lowering springs. I'm looking to do some more performance mods down the road, and I wanted to see what folks here have had good luck with. My...
  13. MartyZ

    Pulled the Trigger on ARH headers, ARP Studs, Remflex Gaskets.

    So I finally pulled the trigger. Ordered the headers from Moe's, ARP Studs (140-1101) and Remflex Gaskets (6022) from Amazon. I know I have broken studs, where they broke and how many is still unknown at this point but I figured I would start a write up on how to repair them. I will more...
  14. Walker

    Headers

    Hey ya'll, been following threads for a while now but never posted or asked my questions straight up. I see a lot of info but am struggling to narrow it down to what I'm looking for.. I have an 04 1500 5.7L quad cab that has a horrific ticking I believe to be coming from the exhaust manifold...
  15. cancunlsp

    Header Bolts Dealer replacement procedure

    Hey guys, I have finally had the broken bolts on the Exhaust manifold. Went to the dealer to schedule warranty work and asked about what all they did as part of the procedure. They told me that the extract the bolts and just replace the broken bolt. They do not replace all the bolts and they do...
  16. El_Dude

    Pulling the trigger on JBA headers. parts check please.

    Headers: https://www.amazon.com/dp/B005NPC9VU/?coliid=I24IHVDBSBA0H4&colid=2FJ9O7I0GR8QS&psc=1&ref_=lv_ov_lig_dp_it Gasket: https://www.amazon.com/dp/B0060ZAWZC/?coliid=IYF5ODGWYW001&colid=2FJ9O7I0GR8QS&psc=1&ref_=lv_ov_lig_dp_it Gasket maker for y-pipe side...
  17. N

    Kooks Long Tube Headers

    Hey guys, new to the forum. Looking for some guidance before I buy a bunch of stuff. Looking to put 3” headers on my 5.7, with the high flow cat Y-Pipe. Primarily to fix the exhaust manifold issues. My question is, is there anything I need between the headers and Y-Pipe? Also are there any...
  18. DiverTooTall

    2019 Classic Headers

    New to Dodge trucks but the classic model uses everything from 2018 for engine and body panels correct? So I could use 2018 long tubes on it?
  19. C

    Guidance on LONGTUBES!

    Hi all, was hoping Matt would chime in as I was directed towards his advice, but I’m contemplating pulling the trigger on some headers to alleviate the broken bolt problem. My 2010 is a daily driver and by any means is not a dedicated racing vehicle. I however, do enjoy having power when I...
  20. C

    Looking to get long tubes...

    Looking at the stainless works non catted tubes for my 2010 5.7, anyone have any experiences with those? Any recommendations to go with a different brand possibly? Not taking the truck to the track or anything, just looking to fix the exhaust bolt issue for good and have some fun in the process!
  21. E

    Cat-Back Exhaust or headers?

    im looking to do a slight upgrade on my 2006 1500 5.7 but im not sure if either change the exhaust manifold for headers or the oem for the exhaust system that is shown below on the link ...
  22. C

    Shorties or Long tubes??

    I’m wanting to buy some headers to replace the manifolds on my 2010 Ram because broken bolts and I was looking for a recommendation on shorties or long tubes. No intention really to race but want best performance. I have my exhaust dumped before Axel with 14” MagnaFlow muffler, would that negate...
  23. Ram7081

    Anyone put Fox 2.0 shocks 983-02-020 (diesel) on a gas truck?

    Anyone put Fox 2.0 coil over shocks 983-02-020 (diesel) on a gas truck? I'd assume you get more of a lift since the diesel motor weights more? How was the ride? Thanks
    • Ram7081
    • Thread
    • bilstein cai diablo diesel fox headers hemi lift shocks tick
    • Replies: 70
    • Forum: Lifted
  24. DoubleJ

    Performance addition recommendation

    Hello all! Looking to add some performance to my 2014 1500 Sport 4x4 DCSB. I've looked at both s/c and cam swap, but I am not sure which way to go... I want something that can still function as a drivable truck, but that I can have some fun with at the track on the weekends. I've looked at...
  25. R

    do 6.4 exhaust manifolds work on 5.7 ram 1500?

    got set of 6.4 exhaust manifolds and not gunna use anymore and wanting to sell. having a hard time finding if it actually works on trucks or not. heard there is clearance issues with frame of truck? also heard jeep srt ones work? do others? i have set of a 300. any info is much appreciated! i...

Latest posts

Staff online

Members online

... and 17 more.
Total: 1,833 (members: 67, guests: 1,766)
Robots: 1,768

Forum statistics

Threads
195,462
Posts
2,870,544
Members
156,170
Latest member
KingBDS

Share this page

Top