I have a 6" lift with a 3" body lift. The wiring harness barely made it to my front differential when I installed the lift but now that I put the body lift on, it is about 3-3.5" too short. I've researched extensions but they don't seem to exist. Has anyone else ran into this? If you have what...
2015 ram 1500 with forged engine, tomahawk camshaft and a homemade boost system easily capable of 12psi plus. The entire build is documented here https://youtu.be/AB_bAwbi7xY and will be consistently updated thank you! G
So I lifted my 4th gen Ram 1500 a while back. I went with a 6” lift. Now this lift was specifically for cosmetic reasons. I like the look. I do not go off-road at all. I’m currently running 35x12.5 on 22x11.5. Again, these are specifically for the look. It’s time for new tires and I want...
So I recently bought Toyo MTs 35x12.5R20 for my 2012 1500. It has the bilstein leveling set up on it. I also have aftermarket rims but I don’t know the actual offset as they came with the truck when I bought it.
I now rub on the uca’s at almost full lock. Makes parking lot maneuvering a b*tch...
New to the Ram Family and I’ve had my truck for about two months now and finally want to make my first post! Here is my new (to me) 14’ 1500 5.7 66k fully loaded. Now to start my list of questions! Please feel free to respond if you have any info that may seem helpful!
1. I have the LED package...
Hey im new here, and I currently have a 5inch RC lift and was wanting a little bit more, so i was thinking about the 3inch body? Does anyone have pics of their set up? especially with 35s?
I'm getting a 6" lift on my 1500 next week with 35" Toyo MTs (2 inch wheel spacers). I may be in the minority but I love the flat black stock wheels so I decided to keep them and put the 35s (275x55rx20) on them.
Anyways, does anyone else have a 6inch on 35s setup? Let's see your pics!
Hey Everyone I just bought a newish Ram 1500 40,100 miles. Driving on the highway is great (How I test drove the truck). But you get on a back road and the ride is about 2 miles and it beats me to death! I hate driving the truck!
Looking under the truck I found an air hose to the back of the...
Little back story. I got the eibach kit (front shocks&springs and rear shocks&springs) and installed it myself (never again). I drove it for maybe 500 miles before I got it aligned, no issues up to this point. Drove great and straight so I put it off for a couple weeks.
The truck was toe-d in...
I'm thinking about which lift kit to get for my 4WD truck and I cant seem to find any bigger than 6". I found a Zone 6" (Sister company to BDS) that you can get with a 5" coil in the back to retain factory rake. I was thinking I could pair that with Bilstein 5100 or 6112 in the front set at...
I’ve got a 2018 ram 2500 4x4 cummins. I bought the steering brace from rough country thinking it should be ok since it’s just a big chunk of metal..... wrong!!! In order to get the brace slid towards the passenger side of the truck far enough for the new pitman arm nut to actually go in the...
For those of you with life TD trucks are y’all upgrading the front and rear axles?
What LSD and gears are y’all using For both axles?
Thanks for the help.
I have a 2008 Quad Cab 4x4 and I would like to do a 4 or 6 inch RCX susp. lift with 35x12.5x20's. Just wondering if anyone has a gen 3 Ram in this configuration? Pics would be great so I can get an idea.
Thank you very much in advance!
I've been losing my MIND trying to find replacement Front sway bar end links for my 2011 Ram 1500 4x4 with a 4" rough country lift, and even though i'm trying my hardest to replace parts as they go with ANYTHING BUT RC, i cant even find just the end links even through rough country. Can someone...
i own a 1998 Dodge Ram !500 5.9L V8 Magnum RWD.
i am going to be installing a skyjack 2" poly value spacer lift with nitro shocks. than a 3" body lift (specific kit not picked out yet).
Currently i have the stock 16" rims and stock tire size on the truck. After I do the suspension and body...
2017 Ram 1500 Night Edition
6" Lift
3" body lift
37x12.50R20
Oracle Wheel Lights
Color Matched Bushwacker Fender Flares
Future Projects (not in order):
8 Rock lights
AMP Research Steps
Custom System
King Shocks
9” lift with 37’s
Waiting on a set of 8 rock lights! I want suggestions on placement for them! 2 are going inside and 4 under the fenders of course. They’re the app guided multi color lights. Anyways!!!! Let me see what you got!
So im sure im probably beating a dead horse by asking this but ive been looking at all these different companies that make lifts for our trucks (i.e. rough country, zone, bds, superlift, pro comp, etc.) And the only ones i can find that has another option for the 6 inch lift besides a strut...
I have a 2012 1500 with a 6” zone lift kit with 35x13.5x20 toyo rt’s. I just replaced the lower control arms with moog arms that have new balljoint and bushings pre installed. I also am replacing my stock strut that has the lift spacer on it with rough country n3 pre loaded struts for a 6” lift...
I have a 2012 1500 with a 6” zone lift kit with 35x13.5x20 toyo rt’s. I just replaced the lower control arms with moog arms that have new balljoint and bushings pre installed. I also am replacing my stock strut that has the lift spacer on it with rough country n3 pre loaded struts for a 6” lift...
I have a 2012 1500 with a 4inch procomp spacer kit with bils up front set to to 1.2 to level out the truck. my steering wanders left and right when I drive and im thinking that it could be blown ball joints. does anyone have any insight as to what it could be?? ill post some pictures of the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.