Just installed Bilstein 6112s @ 2.8" (came preassembled) along with ReadyLift UCAs in the front, and 5100s with 1.5" Motofab spacers in the rear. I was pretty meticulous about torque specs and tightening everything up with suspension under full weight. I got a professional alignment done day...
Hey all,
Has anyone run quality hub-centric spacers (ie: BORA, Spidertraxx) on the stock PW wheels to fit 37s?
I know for aftermarket wheels +18 to +25 offset is ideal to fit 37s. If I went that route I'd likely going with AEVs, Methods, or Racline wheels with those specs.
However, I...
Hey all, first time poster, long time lurker.
I wanted to share my experience with leveling strut spacers on the 1500 series trucks.
Before installing my leveling spacers, I knew that the ride would not be as good as a full leveling strut, but I never saw anybody talking about the long term...
I didn’t see this specifically discussed anywhere, but forgive me if I overlooked it.
I have a 2020 Laramie(new body) with stock 20” wheels. I just ordered a 4” Zone lift from Nick and I’m planning on running 35x12.50R20 Discoverer ST Maxx on stock wheels. Will I need spacers with that setup...
I'm planning on installing a set of 2" hubcentric wheel spacers on my 19 bighorn offroad to give it a lil bit more of an aggressive stance. I'm running my stock 18" wheels on 32" federals. I was wondering if anyone has spacers installed, and give me some feedback. Thanks.
(SOLD)
$90 (retail is $247)
These are the 1210 coils. They add 25% payload. Lifted rear 1/2". They have approx 8,000 on them. I bought with plans on towing, and never did. Not needed now. Link below gives decription from manufacture.
I will ship fedex. Coils weight 24lbs. Buyer pays shipping...
Got a new set of wheels that have a more aggressive offset, so I no longer need these. They have approximately 4k miles on them and worked great while I had them on the truck.
I will sell the set for $150 shipped.
Thanks!
(SOLD)
I have a pair of 3/4" rear coil spacers. These are bottom rear spacers. The manufacture is top gun customs. Came off a Ram 1500 4x4
$40 free shipping.
I need 2.5" in back and 1.5" in front to bring my 305/55/20 tires on OEM 20" rims flush with my fender flares.
Called my local dealership and he said they'll install them but don't supply them (another dealer might have been able to order me 0.25 2 years ago) and mentioned how it only voids...
I have 1.5" TGC rear spacers now but it looks like we might use the truck for some travel trailer vacations next year. I know the TG air bags are pretty well received. Does that mean I can remove the spacers and use the bags for my level look too? I won't need the spacers anymore, right?
So I have a 2016 ram 1500 5.7l hemi I want to level the front to the rear but I was reading stuff last night that if I leveled up front it’ll give a permanent camber issue that can’t be fixed but I want to know if that’s only for a certain height the back of my truck wheel well from ground to...
Hey everyone. I have a bit of a big project. I decided to go bigger than the 6 inch rough country lift kit that I currently have sitting in my garage. I decided to go another few inches on top of that. I know everything I need to accomplish this lift and I have my list planned out. The only...
So I’m looking at doing a 2” level in my 2012 sport and I’m undecided about bils or spacers. i know this forum tends to lean towards the bils but I’m still on the fence about giving up my cushy ride. I drive a lot of rough roads and back roads and the softer suspension is quite nice on them. I...
I debated on what size wheel spacers to get for awhile until a buddy of mine picked up a set of 2" ones and after seeing them in person I decided thats what I wanted also. I got the supreme suspensions spacers (walmart. com has them cheaper than amazon by $30 btw) they are excellent quality...
Have a 2012 Laramie 4x4 with RC 2.5 level. Everything else stock. Currently running stock size tires on the chrome wheels. Looking to fill up the wheel wells and increase ride height with new tires. Plan on going with 275/65r20s. I want to go with the Mastercraft Courser CXTs. The only issue is...
Hey guys,
Looking to put a set of wheel spacers on my truck but at a cross roads on if I should go with 1.5" or 2" etc..
2011 Ram 1500, bilsteins set at 2.1", factory wheels,275 60 20 Falken wildpeak at3's, 2500 flares.
Stance wise I would like the tires to be flush with the flares, maybe...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.