I had 4WheelParts install the ReadyLift 3.5” lift/level kit a couple years ago and this squeaking started about a year ago. Not sure if it has anything to do with the lift. Dealership said they couldn’t find where the squeaking was coming from so I just had to live with it. I think they were...
Had the truck for a year or 2 but front end started popping while turning the wheel been busy so put it off engine blew last year got it replaced and they ziptied everything instead of wiring correctly looked like a crackhead was under it but now i fixed all that but damn all bushings ball...
Hi all,
I’m looking to get my 2014 Ram 1500’s suspension switched from air to springs. Can anyone recommend somewhere in the Ottawa area that has experience doing this? Any recommendations for a specific system? Air delete, Monroe, Bilstein, etc? Looking for stock height, don’t need it to be...
So I’ve been searching thru the previous post on here for a couple days and I think I may have pieced together the answer thru a few different threads I just want to make sure I’m understanding this right.
I have a 2022 Ram 2500 Bighorn w/ a 6.7 and we really like it. Only complaint is ride...
I’m planning on dropping it already at least 2/4.5 but would like just a tad more if there isn’t too much rubbing. The long term wheels that I’ll run are 22x10 on 305/45 nittos or toyos. I know the rear will have plenty of room but how much scrubbing at full lock turn should I expect from each...
I just bought a 2016 Ram Rebel. I turned the corner today and hear a bang and realize the back right corner of the truck was way lower than the rest. I went out and found this… just wondering what happened and what this is?
Hello all,
Long time reader, first time poster here.
2014 Ram 1500 Big Horn, 5.7 Hemi, 4X4
ISSUE
Over the last year or so I have heard a squeak/chirp coming from the front end when going over small bumps in the road around 25mph as well as slow rolling over speed bumps. Every time I think i...
Had the BDS 4" kit installed on my 2018 Power Wagon. The guys at my offroad shop who installed it said the crossmember bracket that came with the BDS kit is not required. They mentioned they BDS said that the crossmember bracket could cause excess vibration and driveshaft failure over time.
My...
Replacing my lower control arms soon. In all of the videos I’ve seen of them being replaced the whole knuckle was removed. Is this necessary or can I get away with unbolting the lower control arm from the truck, knuckle and strut. I’ve replaced upper control arms myself but never lower control...
Hey all, just purchased a 2017 Power Wagon, and I am looking for a new suspension setup. Previous owner installed a BDS 4" lift kit, and fox 2.0 shocks. He also installed airbags for an overland trailer rig. I believe it also has drop brackets. Recently took it to a shop and found the right rear...
Hi guys, this is a question of what i need to do next to resolve this ongoing problem. my 2011 ram 1500 4.7l 4wd quad cab 6.5ft bed had some suspension work done around the middle of march and i have been fighting the problem since the suspension was redone. at around 65-75MPH the steering wheel...
Hi all, I just recently took ownership of a 2001 ram 2500 sport model from my father. It’s a bit rusty underneath but passes inspection. However, the front drivers side coil spring seat (the part that sits on top of the axle) is rusted and has a hole in it. Is there a way to replace this without...
Hello!
I have a 2008 ram 1500 megacab that I just picked up last month. I'm trying to figure out how to improve my ride but having a hard time telling if the current suspension is completely stock or not. I am attaching 3 pictures. One of what the front looks like, and 2 of the back. I'm...
So I am thinking about swapping from the 4th gen 5 lug to 5th gen 6 lug. The adapters are sketchy so I would rather do a full conversion.
From my research, It appears that all I need is a 5th Gen rear axle (with the same gear ratio obviously), 5th gen hubs, and 5th gen rotors. I believe that...
Alrighty strangers, I have a project that is a little off-normal. I have this sorta lofty, overlanding, mixed-surface, madmax, houston-streets-capable, buck-wild build that I have been working on for a while now. I have a 98 2wd ram chassis that I'm using as my platform for bringing my 63'...
A lot of people don’t know but you can put torsion keys from a ford f150 (10 gen) into a Chevrolet 99-06 4wd and it acts as 4-5 inch lift when you max out the keys. I was wondering if anyone on here has tried this but on a 02-05 ram 1500 4x4? Ik they for sure fit but my real question is if they...
I have a 2017 Ram and recently had a leveling kit installed. My air bag suspension sensors keep popping off and the warning light keeps coming on. The dealer is trying to tell me that the sensors are now over extended and I need to get an extension for them. Do they even make such a part? I...
I'm wondering what's a good aftermarket shock/suspension for my 2002 Ram1500 Sport 4.7 L on 20" rims. I only drive in the city, I don't haul anything on a trailer and I don't carry anything over 500 lbs in the bed. My OEM shocks are squeaking too much so I need to replace them. Thank you to...
I recently picked up a used 2012 Powerwagon and the rear driver side shock is blown out so I've been looking for replacement shocks. I don't know if the truck previously had any lift kit on it or not and I want to order the correct size shocks. Does anyone know what the stock height of a 2012...
Hey guys. I’m thinking about putting 275/65R20 for my rear tires & 275/60R20 for my fronts.
Has anyone had any experience with this? Good or bad, please share. I did my research(online). I’d like to know from someone with knowledge first hand.
Thanks
Hey Ram Fam
Looking to get wheels, tires and lowering suspension soon. Please let me know of places I should look into. I’ll travel for quality work, preferably in state.
Thanks!
G
2011 Ram 5.7. Was driving down the expressway at 75 mph when I started to feel a vibration in the steering wheel. As I slowed down to pull off the road the movement in the steering wheel became slower with the deceleration of the truck but much worse in that it was jerking the wheel about 2" as...
Good Afternoon Everyone,
I'm new on this site and in need of some information regarding parts I'm ready to order and wheel/tire specs.
I have a 1983 D150 long bed in fairly good condition, on 31x10.5in tires with a 3.7 "Leaning Tower with No Power" married to a 727.
I recently ordered a...
I havent seen much of anything on 35s fitting on Stock Bighorn so here you go. I have a 2021 Bighorn on Stock suspension no offroad package and I was able to fit 35/12.5/r20 Patagonia M/T on stock rims with only a little rubbing at full lock in reverse. I think if you remove the mudflap then...
Forum,
Newby on this site.
Thankfully I finally found the Ram Forum and you who may have been through this.
and might be able to solve an issue that few have any knowledge.
Scenario
I purchased 2016 Ram 1500, limited laramie ecodiesal last May looking for a rugged 4x4 truck to tow my camper...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.