I didn’t see this specifically discussed anywhere, but forgive me if I overlooked it.
I have a 2020 Laramie(new body) with stock 20” wheels. I just ordered a 4” Zone lift from Nick and I’m planning on running 35x12.50R20 Discoverer ST Maxx on stock wheels. Will I need spacers with that setup...
Ok. New saga in my truck life. I put Rough Country Vertex coil overs on. Went to a new alignment shop after. Making this my 5th shop now? Forget. They aligned it. Shop says the adjustments are maxed out. Best he could do. This is left pic of align. Fast fwd. I put Zone UCA on and took RC coil...
Hi all new poster, old reader.
I'm currently running a zone 6 inch lift with 5 rear coils, bils all around with them set at 2.1 after removing the 5/8 preload spacer.
I'm looking for an assembly or shock and spring to replace the top hat strut spacer, as i believe it will improve ride...
2017 Ram 1500 Laramie, Crew Cab 4×4, 6'4" bed.
Had Bilstein 6112s installed at 2.8" along with Zone UCAs today. Afterwards took it in to Les Schwab Tire Center for an alignment. I go to pick up my truck once they're done; I ask them how the truck did and they tell me everything was good. Drive...
Hi Everyone,
I just installed a 6” Zone lift in my ‘13 1500 Quad Cab. I did the install myself and everything went smoothly and each component is torqued to spec (just double checked earlier today. However, I have 2 questions pertaining to the truck post-lift kit.
Kit Specs:
Zone 6” Kit
Fox...
So im sure im probably beating a dead horse by asking this but ive been looking at all these different companies that make lifts for our trucks (i.e. rough country, zone, bds, superlift, pro comp, etc.) And the only ones i can find that has another option for the 6 inch lift besides a strut...
I have a 2012 1500 with a 6” zone lift kit with 35x13.5x20 toyo rt’s. I just replaced the lower control arms with moog arms that have new balljoint and bushings pre installed. I also am replacing my stock strut that has the lift spacer on it with rough country n3 pre loaded struts for a 6” lift...
I have a 2012 1500 with a 6” zone lift kit with 35x13.5x20 toyo rt’s. I just replaced the lower control arms with moog arms that have new balljoint and bushings pre installed. I also am replacing my stock strut that has the lift spacer on it with rough country n3 pre loaded struts for a 6” lift...
Looking at zone 5" lift for a 05 ram 1500 4x4 but im wondering if it is woth it to get the 6" BDS instead? Worth the extra $1000? Seems the options are a little more limited for the 02-05.Anybody have them for the 02 - 05 1500s and have comments or opinions?
Thanks
hello all,
Im going to be installing a zone 4” lift with rear 3” coils (no spacer).
If i used the rancho quick lift struts assemblies in addition to the zone lift, would that level me out?
Thanks in advance
After going through many lift threads and looking at many pics over here I'm steel confused. I'd like to lift my truck and either go 4" or 6" more likely Zone kit or less likely Fabtech kit. Rancho struts seem not to be adjustable as Bilsteins, though I'd like to keep the front Rancho struts...
Just installed my zone 6/5 on my 2017 ram 1500 4x4. Been a couple days so I thought I would check how everything was looking underneath.
Lift was installed my self.
Noticed that my lower control arms (both sides) have marks on them from the knuckle hitting it at full turn. I’ll attach a...
Just installed my zone 6/5 with bils and zones heavy duty UCAs, currently at the shop getting it aligned and they’re telling me they can’t get the caster right, said they have it completely maxed out. Anyone else have this problem? Ways to fix it?
Ok guys I've been traveling alot for work so haven't had a chance to install my zone 6" lift yet. Hoping to start once I get home but trying to get all my ducks in a row. What do you guys think of this rim and tire combo? I'm thinking about taking my chances with the 37s even tho I have 3.21...
Hey fellas,
Looking into different ways of leveling my new truck. I know a ton of members have experience with Bilstein's in the front and new UCA's as well. But who has experience with a more high end way of leveling like the one offered from Carli Suspension? Or a kit from Icon?
The truck...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.