2011 oem backup camera

[skirider]

Just want to post this so hopefully somone sees it. The oem instructions for my 2011 dodge ram 1500 were wrong. It states to tie in power under distribution block to slot 15. White green stripe wire.
THAT IS INCORRECT. IT STILL IS SLOT 15 BUT THE WIRE IS WHITE WITH RED STRIPE.

FOUND THAT ON ANOTHER FORUM AND IT DID FIX MY ISSUE HAVING NO PICTURE. actually only had picture when lights were on. Obviously wrong feed.

But im good to go. 300 buck total 250 for kit of ebay oem and 50 for dealer activation.

 

[thirstybob]

I agree ^^^
The instructions were vague. Connect to the White/Red wire under the hood and Use the white pin block supplied and install it on the passenger side hole on the back of the head unit.
By the way, my Bighorn Crew cab had about 8 feet of harness left over.