3" body lift + 3" suspension lift

[reyescastillo1]

Just added a pa 3" body lift to my 3" rc suspension lift, body's shaved , 35s , have a new grill coming in and top light bar is coming off , opinions on wheel spacers ? 2"?

 

[02ramboi]

Just added a pa 3" body lift to my 3" rc suspension lift, body's shaved , 35s , have a new grill coming in and top light bar is coming off , opinions on wheel spacers ? 2"?

I have 1.5 that's a perfect size this was taken before my lift.


Sent from my iPhone using Tapatalk

 

[Witch]

With these you will not have to alter the studs

https://www.customwheeloffset.com/c...spacers-set-4-5-or-6-lug-all-makes-and-models

 

[usaf2006]

2" would be good for the height to wheel stance ratio. BORA and supreme suspension spacers have good reviews. Nice looking truck. I'm digging the shaved look.

 

[reyescastillo1]

Thanks for the reply , still new to the lifting thing , used to have the truck dropped with a 2-4 drop on 26s , got another question for yal experienced guys ? If I was to buy lift spindles and add those would everything work with what I got now ? Kinda want a stanced look but working on it slowly? These are the spindles
http://www.airbagit.com/mobile/product.aspx?ProductCode=x2%2Dspi%2Ddod%2D06&404;http://www.airbagit.com:80/product-p/x2-spi-dod-06.htm=

 

[02ramboi]

Thanks for the reply , still new to the lifting thing , used to have the truck dropped with a 2-4 drop on 26s , got another question for yal experienced guys ? If I was to buy lift spindles and add those would everything work with what I got now ? Kinda want a stanced look but working on it slowly? These are the spindles

http://www.airbagit.com/mobile/prod....airbagit.com:80/product-p/x2-spi-dod-06.htm=

Take a look at maxtrac spindles there really good and they also bring your tire out and an inch with the spindle alone. I have a maxtrac kit on mines looks different then it did above lol


4.7 v8
Hi flow cat/flowmaster exhaust
7 inch lift/5 inch lift
20 inch falken wildpeak at3/33's

 

[reyescastillo1]

What are you rims painted with ?, all you have to do is install just spindles and that's it ?

 

[reyescastillo1]

Love you r truck by the way!

 

[reyescastillo1]

Use to look like this on 22s and then on 26s

 

[02ramboi]

What are you rims painted with ?, all you have to do is install just spindles and that's it ?

I actually painted my stock rims myself with spray paint yes Spray paint looks like it was done with a gun legit I prinered did my coats then gloss. And I have spindles and a 3 inch spring in front and 5 inches in back with shackles and blocks


4.7 v8
Hi flow cat/flowmaster exhaust
7 inch lift/5 inch lift
20 inch falken wildpeak at3/33's

 

[reyescastillo1]

Look really nice , any up close pictures ? Thinking I should do mine . Looking into the maxtracs right now and there only in 4.5" ?

 

[02ramboi]

Look really nice , any up close pictures ? Thinking I should do mine . Looking into the maxtracs right now and there only in 4.5" ?

Yeah 4.5 spindle and 3 inch spring


4.7 v8
Hi flow cat/flowmaster exhaust
7 inch lift/5 inch lift
20 inch falken wildpeak at3/33's

 

[02ramboi]

That's as close as I got I can always take tomorrow you can try zooming in


4.7 v8
Hi flow cat/flowmaster exhaust
7 inch lift/5 inch lift
20 inch falken wildpeak at3/33's

 

[reyescastillo1]

They look real good, think I might have to do mines this weekend ? , what kinda primer spray paint and clear? You just taped off the tire ?

 

[02ramboi]

Duplicolor primer duplicolor flat black paint


4.7 v8
Hi flow cat/flowmaster exhaust
7 inch lift/5 inch lift
20 inch falken wildpeak at3/33's

 

[Glefevre87]

Just added a pa 3" body lift to my 3" rc suspension lift, body's shaved , 35s , have a new grill coming in and top light bar is coming off , opinions on wheel spacers ? 2"?

Does your top light bar create wind noise? if so, how bad?

 

[cliftonclendenen]

What tail lights are those? They look really nice!


Sent from my iPhone using Tapatalk