6in zone suspension with stock wheels

[blackram2014]

Hi guys new to the forum, I've done alot of reading but still not 100% on this. I am getting a 6in zone lift installed and would like to run my stock black 20 in wheels with 35x12.50x20 tires. Not sure if I can just get away with th 1/4 in spacer like rcx lift or not. Thanks in advance

 

[AustinB]

Check the specs on zones website.

IMO

 

[Drummin4jc]

Hi guys new to the forum, I've done alot of reading but still not 100% on this. I am getting a 6in zone lift installed and would like to run my stock black 20 in wheels with 35x12.50x20 tires. Not sure if I can just get away with th 1/4 in spacer like rcx lift or not. Thanks in advance

If you look at the specs on Zone's website, you'll see that the 6" suspension lift supports 37x12.50x17 or 20. You'll be fine running 35's.

Adam

 

[AustinB]

The backspacing is the issue, not the size of the rim

5" bsm for 18-20"
4.5" bsm for 17"

IMO

 

[homebrew]

they will fit but will only give you about a quarter of an inch clearance(depending on tire) I was running Toyo AT2s with 1.5 spacers on my 14. Took the spacers off when I traded it in.

 

[blackram2014]

Thanks for the replies guys, I ended up just ordering wheels to.

 

[robbob]

I am running my black wheels with 295/65R20 which works out to a 35.5 X 11.5 R 20. They fit with about 1/4 inch between the tire and the steering knuckle up top.

 

[misuracaf10]

I am running my black wheels with 295/65R20 which works out to a 35.5 X 11.5 R 20. They fit with about 1/4 inch between the tire and the steering knuckle up top.

Do you have a pic of its stance how far do those tires stick out ?

 

[GoKartMozart]

Will the 6" Suspension System Zone Offroad D40/D41 also work on a 2016 Ram Lonestar 2WD or are they 4WD only?