All Repair Parts @ Employee Cost!

[AlwaysSomethin]

Benny's I'm looking for these 2 parts
1DX61DX9AA
1DX60DX9AA

Should be black upper c pillar trim for a crew cab

 

[MaxSteel2013]

I can figure out locations if I have an idea of quantities

 

[MaxSteel2013]

This is where Mopar's data is weak. I am going to need your help with determining this. I will PM you some diagrams to go over and hopefully we can determine the majority of the hardware.

-Benny

Got it. I'll make some counts tomorrow based on hole locations/types.

 

[HTXRamExp]

Hey Benny,

I'm looking for P/Ns for driver/passenger remote proximity keyless entry door handles as well as rear door handles all in hydro blue paint.

I have an Express classic w/ hydro blue paint and the standard textured black handles, but am looking to add the passive keyless entry and go options.

My vin: 1C6RR7KT0KS643394


Listed below is a vin for a 2018 hydro blue sport with proximity keyless entry and go options from factory:

1C6RR7MT4JS220054


Thanks


Sent from my iPhone using Tapatalk

 

[AllMoparParts.com]

Benny's I'm looking for these 2 parts
1DX61DX9AA
1DX60DX9AA

Should be black upper c pillar trim for a crew cab

Your part numbers are correct, These can be found here
https://parts.allmoparparts.com/oem-parts/mopar-rear-pillar-trim-1dx61dx9aa
https://parts.allmoparparts.com/oem-parts/mopar-rear-pillar-trim-1dx60dx9aa

I will send you a code you can use,
Benny

 

[AllMoparParts.com]

Hey Benny,

I'm looking for P/Ns for driver/passenger remote proximity keyless entry door handles as well as rear door handles all in hydro blue paint.

I have an Express classic w/ hydro blue paint and the standard textured black handles, but am looking to add the passive keyless entry and go options.

My vin: 1C6RR7KT0KS643394


Listed below is a vin for a 2018 hydro blue sport with proximity keyless entry and go options from factory:

1C6RR7MT4JS220054


Thanks


Sent from my iPhone using Tapatalk

Hello,

These can be found here
https://parts.allmoparparts.com/oem-parts/mopar-handle-exterior-door-1uj81mbjag
https://parts.allmoparparts.com/oem-parts/mopar-handle-exterior-door-1uj86mbjag
https://parts.allmoparparts.com/oem-parts/mopar-handle-exterior-door-1gh19mbjad
https://parts.allmoparparts.com/oem-parts/mopar-handle-exterior-door-1gh18mbjad

Thanks,
Benny

 

[MaxSteel2013]

Got it. I'll make some counts tomorrow based on hole locations/types.

Didn't get this done since I was messing with suspension too. I'll try again this weekend.

 

[MaxSteel2013]

...if only there was someone who could take a picture of the backside of an installed Rebel bumper.

 

[WarrenW]

Hey Benny
I am looking for the Multi-Function Switch w/ Stability Control.
I believe the part number is 56044802AC

My trucks vin is 1D7HA18208J233609

its an 08 1500 ST with the 5.7 Hemi.

right rear brake light is not working but the bulb is good (new). Windshield wipers are acting funny, ect...

Thanks

 

[AllMoparParts.com]

Hey Benny
I am looking for the Multi-Function Switch w/ Stability Control.
I believe the part number is 56044802AC

My trucks vin is 1D7HA18208J233609

its an 08 1500 ST with the 5.7 Hemi.

right rear brake light is not working but the bulb is good (new). Windshield wipers are acting funny, ect...

Thanks

Hi Warren,

The latest part number is R5082062AJ which can be found here
it is currently on a slight backorder and will take a few weeks to obtain.

I would have the truck diagnosed as I dont believe the wipers or rear lamps would be effected by the CS in this case. Let me know if you have any questions

-Benny

 

[MaxSteel2013]

Benny -

Do you have dimensions on the new RAMBAR that is listed for the 2019s only? I'm curious if I could get it to fit on my '17.

 

[WarrenW]

Thank you for that info Benny. After reading your post I went back out and had someone else look at it. Turns out I did not seat the bulb good I guess. He simply took it out, turned it 180 degrees and put it back in and wouldn't you know it works fine now.
So either it was not in good or I had put it in backwards which I did not think you could do with that type of bulb.

I will keep your info handy as I just bought this truck from my company.
thanks again

 

[AllMoparParts.com]

Benny -

Do you have dimensions on the new RAMBAR that is listed for the 2019s only? I'm curious if I could get it to fit on my '17.

The fitment does seem odd based on years listed, being this is new we do not know if fitment can be expanded yet.

As for the size we only have packaged specs which are
52.03 / 28.02 / 12.50 inches
Weight: 44.9 pound

-Benny

 

[AllMoparParts.com]

Thank you for that info Benny. After reading your post I went back out and had someone else look at it. Turns out I did not seat the bulb good I guess. He simply took it out, turned it 180 degrees and put it back in and wouldn't you know it works fine now.
So either it was not in good or I had put it in backwards which I did not think you could do with that type of bulb.

I will keep your info handy as I just bought this truck from my company.
thanks again

Sure no problem, As for the wipers the TIPM may be the issue but once again it should be diagnosed

Thanks,
Benny

 

[Scottieone12]

Benny,
Can you quote me on 2 parts please
68366552aa and 68328704ac the shipping zip code is 32757. it is for a 2018 ram 1500 for a 2018 UAQ radio upgrade.

Thanks,
Scott

 

[jgallo2448]

Benny
Can you quote me on
p/n 1CS63XDVAA
Should be a ac vent for a 2007 Charger RT.
Thanks John



Sent from my SM-G935T using Tapatalk

 

[MaxSteel2013]

The fitment does seem odd based on years listed, being this is new we do not know if fitment can be expanded yet.

As for the size we only have packaged specs which are
52.03 / 28.02 / 12.50 inches
Weight: 44.9 pound

-Benny

Do you have a part number for a Bright White LHR door handle with proximity sensor? I had one on my 2013 Maximum Steel, but I can't locate a part number. I'd like to add that to my RAMBAR quote if possible.

 

[AllMoparParts.com]

Benny,
Can you quote me on 2 parts please
68366552aa and 68328704ac the shipping zip code is 32757. it is for a 2018 ram 1500 for a 2018 UAQ radio upgrade.

Thanks,
Scott

PM sent

Thanks,
Benny

 

[AllMoparParts.com]

Benny
Can you quote me on
p/n 1CS63XDVAA
Should be a ac vent for a 2007 Charger RT.
Thanks John



Sent from my SM-G935T using Tapatalk

Hi,
I am sorry but this part has been discontinued and is no longer available

-Benny

 

[AllMoparParts.com]

Do you have a part number for a Bright White LHR door handle with proximity sensor? I had one on my 2013 Maximum Steel, but I can't locate a part number. I'd like to add that to my RAMBAR quote if possible.

Left Hand Rear? There is no proximity entry buttons on these so they are all the same. Your part# would be 1GH19GW7AD

Let me know if I misunderstood you.
Thanks,
Benny