ATI Moes super damper pulley

[TylerB]

Mine was a breeze to remove the stock hub and install the new ATI with a Snap-On puller

 

[Nutshell]

No trouble at all and I run 2 big amps and a 12" sub. I also switched out to the v6 efan and 180 stat. Great upgrade!

Looks like this is a go

 

[RAMTRPR]

Just got my ATI today. Have to go get the puller and the belt. Anyone have a model# for the Belt I need to get? Going to Autozone after work today.

 

[RAMTRPR]

Does anyone know the belt model number to go with this on a 2009 1500?


Sent from my iPhone using Tapatalk Pro

 

[Hipps2000]

I can’t remember the part number I used a Napa belt..matt at Moes knows the exact size. I posted about it somewhere on this site a few years ago. Contact matt or try to search ATI dampner pully

 

[S0CAL]

Per Matt (@Hemi450hp) @Moes, off his website:

The 09-12 trucks need a 77.5" 6 rib belt and the 2013+ trucks need a 71.5" 6 rib belt. Any local parts store should have this in stock.

 

[RAMTRPR]

77K56 is the number I used I believe.


Sent from my iPhone using Tapatalk Pro

 

[AzCats]

No trouble at all and I run 2 big amps and a 12" sub. I also switched out to the v6 efan and 180 stat. Great upgrade!

Since your post: Any issues with the battery charging? I have the V6 E-Fan Mod too and concerned with enough charging.

 

[Hipps2000]

Since your post: Any issues with the battery charging? I have the V6 E-Fan Mod too and concerned with enough charging.

Not at all and am still running my Orginal battery from factory. Still cranking truck over in the cold northeast. I plan to upgrade the battery to something really nice when it starts to go. Probably be next fall.

 

[Ram04]

Looking at getting one of these for my Ram and wondering if any of you got the Aluminum version?

One person posted a 3lb savings over the stock damper and about 7/8 less diam.

I have to believe the Aluminum version would be a significant weight savings.