bump stops 2/4 drop

[Lawhand]

what is everyones solution to the bump stops on a 2/4 drop. i got the mcgauphys kit and it came with 2 TINY pieces of HARD rubber which i thought was kind of useless.

bumpstoppless right now :-(

 

[TylerB]

These are the bump stops that came with my Belltech kit. Real nice foam rubber. I've only got a 1/4" clearance between them and my lower control arm, but you would never know.

Bell Tech 4923 Belltech Universal Bump Stop Kit

 

[torq]

I took the bump stops out and with a hack saw cut them off so they hang down about 1". then took an angled grinder with a scotchbrite cookie and rounded off the corners and looks as good as factory. costs $0 lol

 

[WhiteExpress]

I've ran Prothane 3/8" thick bumpstops before. They are 'harsh' but still far better than bouncing around hitting a thicker bumpstop IMO.

 

[UNBROKEN]

I replaced all 4 of mine with the Energy Suspension beehive style stops. The front I've never once felt bottom out...the back I do feel on occasion but it's not too bad.

 

[Lawhand]

i finally ended up cutting mine like TORQ did