GroundForce 2 inch rear springs

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ChiChi

Junior Member
Joined
Feb 18, 2018
Posts
29
Reaction score
9
Location
Pennsylvania
Ram Year
2014/2016/2016
Engine
5.7 hemi/6.7 Cummins/6.7 cummins
Anybody on here ever take a coil or two off the ground force rear only 2 inch drop?

I have a 2wd RCSB 5.7 truck. Looking to bring the rear end down a little bit and just wondering if anyone has ever chopped these up at all. Attached is photos my truck with a 0/2 drop as it sits, I'm just waiting on my springs and ill be doing a 2 inch front drop as well.

(the 3500 is mine too)CHI CHI.jpgCHI CHI Speedway.jpg
 

razor1

Senior Member
Joined
Dec 27, 2015
Posts
429
Reaction score
208
Location
St.Petersburg Fl
Ram Year
2018
Engine
Hemi 5.7
not sure about the cutting of the springs, but I have a question. Do you like the Ground force kit? So from stock height you only lowered the rear 2" at this time and left the front stock? I am looking at the 2/3 for my 2018 RCSB knight edition.
 
Top