Headlights/ tail lights

[Jdeere]

Looking to upgrade my headlights and tail lights on my 2014 1500. Any suggestions would be appreciated!!! Looking for a blacked out look.

 

[Wise]

Depends on what you want to spend JJs Retro shop does awsome work. I had to get rid of a little chrome myself

 

[Deepc6]

What type of bumpers did you install?


Sent from my iPhone using Tapatalk

 

[Jdeere]

How much did your lights run you? Love the look and the custom bumper.


Sent from my iPhone using Tapatalk

 

[Demon-HeMi]

Looking to upgrade my headlights and tail lights on my 2014 1500. Any suggestions would be appreciated!!! Looking for a blacked out look.

I think a better question is you tell us how much of a budget you have for us to spend for ya lol

 

[Jdeere]

I think a better question is you tell us how much of a budget you have for us to spend for ya lol

I'd wanna keep it under 400


Sent from my iPhone using Tapatalk

 

[Demon-HeMi]

Blacked out lights come in many different ways, the most costly will be custom ones and the sky is the limit on options and price lol

As far as aftermarket goes or just bolt on lights you can purchase, you can get black OEM QUADs where the black internal parts are glossy

OEM projectors with the same glossy black internals

Or you can go aftermarket black lights which will have a matte or satin black internal parts...

And i can show you more options but you just need to specify a budget

 

[Demon-HeMi]

I'd wanna keep it under 400


Sent from my iPhone using Tapatalk

under $400 id go with the glossy oem black quads or get the aftermarket quads with clear corners...


you might be able to find some oem black projectors for around $400 but then you still gotta buy the conversion harness which would put you over budget

 

[Jdeere]

under $400 id go with the glossy oem black quads or get the aftermarket quads with clear corners...





you might be able to find some oem black projectors for around $400 but then you still gotta buy the conversion harness which would put you over budget

Was considering just opening mine up, painting the housing black and throwing in some HIDs. Never tried it before though


Sent from my iPhone using Tapatalk

 

[Demon-HeMi]

i dont know your painting skill, so ill assume its not the best...


most people will do rattle can and you wont get a great gloss from a rattle can without a bunch of sanding and polishing that most people dont want to do, so you will wind up with a satin or matte finish anyways so id say save the risk of damaging your OEMs and just order some simple black housing quads off ebay, they run about $130-$160, that way you at least have one set of lights you can run while you practice on your extra set, for people who are just beginning to take apart lights i always suggest having a spare set, something can and usually will go wrong on the first set, lol, have had at least 3 friends who melted the inside of their headlights

 

[Rzrman328]

+1 on having a second set if you've never done this before.

 

[Wise]

They are both the ici magnum bumpers and as for the cost of the lights more than 400 dollars