Hood Vent LED

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ToxicFire

Senior Member
Joined
Jan 19, 2020
Posts
201
Reaction score
136
Location
CA
Ram Year
2014
Engine
5.7
old thread bump but hoping to do this in the next couple weeks.
Some have done plug and play and say it connects to factory harness for turn signals/ daytime lights . On a 14 sport with projection style lights what would i tap into?

Do i need inline fuses? I have a small 6 fuse box im using for other led bar install i could use if needed.

Also anyone ordered from amazon have links to good 5mm bulbs,white and amber?
do i drill 5mm holes?
 
Last edited:

Rebelrouser

Senior Member
Joined
Oct 5, 2016
Posts
157
Reaction score
121
Location
Cowtown AB
Ram Year
'22 Ram 1500 GT
Engine
Hemi 5.7
No fuses are needed. When I did mine I just hard wired the middle row(amber) to my signal lamp wires- each side. For the top/bottom rows I wired them to the park light wires-both sides. Easy peasy- japaneesee. But, I also wired in waterproof 3 pin connectors that run down beside the battery area- same distance on both sides so as to not make it look like a monkey wired it. That way if I had to remove them it's real easy. Just pullthem through the hood vent hole.
 
Top