How high?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DOAX

Senior Member
Joined
Dec 12, 2011
Posts
259
Reaction score
3
Ram Year
2000
Engine
5.9 360
Best I can do for you, at the moment... (measurements are in mm. Ex. 279 mm = 10.9842 ")


1 millimeter = ~ 0.04 inches

to make it a little easier for those not great with math

IN" X 25.4=MM
MM X .0394=IN"
 
OP
OP
U

uplandhawaii

Junior Member
Joined
Jan 25, 2012
Posts
13
Reaction score
0
Location
Big Island Hawaii
Ram Year
2001
Engine
5.9
No worries, I bought it because the very low mileage and excellent condition. I plan to get the lift sorted out and lowered a few inches.
 
OP
OP
U

uplandhawaii

Junior Member
Joined
Jan 25, 2012
Posts
13
Reaction score
0
Location
Big Island Hawaii
Ram Year
2001
Engine
5.9
Got my FatBobs 2" leveling spacers, going to lower it and see if I can get it down to around 5" or so. May not need the 2" spacer but better to have than not have. Also started on making my upper/lower control arms basing them off the 5" #'s I got here, 17.25" for the uppers and 18.5" for the lowers,poly bushings at either end.
 
OP
OP
U

uplandhawaii

Junior Member
Joined
Jan 25, 2012
Posts
13
Reaction score
0
Location
Big Island Hawaii
Ram Year
2001
Engine
5.9
Replaced the 6" spacers up front with 2" spacers, didn't do the back, not sure if I will. Gives the front a pretty aggressive rake. I was able to measure a co-worker's friend stock 2500, the measurements are proportional. Not sure if I like the rake but for now I'll leave it.

bigdodge.jpg
 
Top