Interior door skins

[rocket]

Do I need that body shop tool too get these off? I'll be doing my speakers soon. Is there dyi post on this yet? Any comments or tricks to getting this done would be appreciated. Thanks guys and gals.

 

[0212353]

couple screws at the bottom, remove the handle - pop it up. No "pop" tool needed.

 

[0212353]

read this post rocket - http://www.ramforum.com/f45/jimmy-jammers-2109/#post43906

its about jimmi jammers, but it shows how to get the panel off, screws, etc.

 

[quietpeen]

once you pop the things out don't you then have to lift up?

 

[07BlueRam]

I had to take mine off for the new tow mirrors i put on you just have to be careful about the power window buttons mine are a little lose now bc the way they got taken off by me. you need to take the screw out the hold your door handle on, and the couple at the bottom of the door. then you can slide the door skin up.

 

[0212353]

once you pop the things out don't you then have to lift up?

yeah.

 

[rocket]

Ok watch the mirror buttons. and unscrew and pop up is this right?
Thanks Jeremy and everyone else!!

 

[dodgeman70592]

Front doors- 1 phillips head in sail panel, 1 phillips head behind handle, 2 phillips head on bottom of door panel, 10mm bolt holds the handle on. Once that is removed, lift up on panel, reach around and disconnect power window/door lock harness (push tab and pull down)

Rear doors- 1 phillips behind handle, 10mm bolt on handle. Repeat other steps

 

[rocket]

Front doors- 1 phillips head in sail panel, 1 phillips head behind handle, 2 phillips head on bottom of door panel, 10mm bolt holds the handle on. Once that is removed, lift up on panel, reach around and disconnect power window/door lock harness (push tab and pull down)

Rear doors- 1 phillips behind handle, 10mm bolt on handle. Repeat other steps

cool. Thanks. Jared.

 

[LB3711]

bring it down Its easy. I got mine off in 5 mins each

 

[rocket]

This could happen.......You supply the beer?