Let Me See Your Flares!

[develand]

Just like the title says, I want to see what fender flares people are running.

I just leveled my 16 crew cab 1500 and added 20x9 +1 wheels and they stick out and inch or two.

First time driving in the rain and my once clean truck is coated down the side. I know this will happen regardless but I want to minimize it. Plus I want to remove the stock mudflap, but clearcoat damage has been done already.

Thought about color matched pocket style but I want to see what else people have. Will attach photos of my truck in shortly.

 

[develand]

Here is what I am working with.








Sent from my iPhone using Tapatalk

 

[MarshRam]

Well, don't think my color scheme will work for you, but here's a cheap set that fits the bill for me.

 

[develand]

Or worried about color scheme on others. Just flare ideas.

 

[Pull Ya]

16 Sports CC with 2500 OEM flares
Jay

 

[develand]

Those kind of look like the bushwhacker extend a flare design. Not bad though.


Sent from my iPhone using Tapatalk

 

[Curlyp]

Well, don't think my color scheme will work for you, but here's a cheap set that fits the bill for me.

Very nice! Where did you get them?


Sent from my iPhone using Tapatalk

 

[MarshRam]

Very nice! Where did you get them?


Sent from my iPhone using Tapatalk

Here you go. The front set cuts were off by a couple millimeters, but it is not really noticeable. I could have done some trimming to correct it and just might do that when I have time. Bought them on a whim, the offset was killing my paint. The bolts are not black, I just dipped the entire flares black.

These are cheap IMO, but I have never had flares, so couldn't tell you if a $350+ set is really any better. I don't see they are going to disintegrate over time or anything like that and I dipped them to match everything else. They look fine with my scheme and most importantly, they gave my paint a bit more protection.

https://www.ebay.com/i/391619471893?chn=ps&dispItem=1&ul_ref=http%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmpre%253Dhttps%25253A%25252F%25252Fwww.ebay.com%25252Fp%25252F2009-2014-Dodge-RAM-1500-Bolt-on-Rivet-Style-Fender-Flares-Black-Textured-L-R%25252F2019669108%25253Fiid%25253D391619471893%252526chn%25253Dps%252526dispItem%25253D1%2526itemid%253D391619471893%2526targetid%253D328367835322%2526device%253Dm%2526adtype%253Dpla%2526googleloc%253D9011549%2526poi%253D%2526campaignid%253D887244396%2526adgroupid%253D44555983836%2526rlsatarget%253Dpla-328367835322%2526abcId%253D1129086%2526merchantid%253D101812008%2526gclid%253DCj0KCQjw--DLBRCNARIsAFIwR27HSgM5ZGGdB0CBHJ1Li5Q-jOd2Qzh22arkdXNHc7gDNSPCcGXR71EaAkQaEALw_wcB%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D1268130615195

 

[Curlyp]

Here you go. The front set cuts were off by a couple millimeters, but it is not really noticeable. I could have done some trimming to correct it and just might do that when I have time. Bought them on a whim, the offset was killing my paint. The bolts are not black, I just dipped the entire flares black.



These are cheap IMO, but I have never had flares, so couldn't tell you if a $350+ set is really any better. I don't see they are going to disintegrate over time or anything like that and I dipped them to match everything else. They look fine with my scheme and most importantly, they gave my paint a bit more protection.



https://www.ebay.com/i/391619471893...3D711-117182-37290-0%26rvr_id%3D1268130615195

Thank you. Were they difficult to put on?


Sent from my iPhone using Tapatalk

 

[BiGMERF]

1.75 inch spacers 33x12.5 tires

 

[muddy12]

I'm running 2" spacers with the factory wheels, tires stick out just a bit past the flares.


Sent from my iPhone using Tapatalk

 

[MarshRam]

Thank you. Were they difficult to put on?


Sent from my iPhone using Tapatalk

Installation wasn't too bad. Had to press a little bit of weight on them as I was putting in some of the fastening screws. They give you rubber lining that attaches to the flares where they rest on the paint and they fit tight, no 3M required.

 

[mohemipar]

Im partial to the OEM HD flares as well.

 

[develand]

Anyone else? Only a couple people have flares? lol


Sent from my iPhone using Tapatalk

 

[lharrell79]

Anyone else? Only a couple people have flares? lol


Sent from my iPhone using Tapatalk

You need more flair?

 

[OnSale]

Just like the title says, I want to see what fender flares people are running.

I just leveled my 16 crew cab 1500 and added 20x9 +1 wheels and they stick out and inch or two.

First time driving in the rain and my once clean truck is coated down the side. I know this will happen regardless but I want to minimize it. Plus I want to remove the stock mudflap, but clearcoat damage has been done already.

Thought about color matched pocket style but I want to see what else people have. Will attach photos of my truck in shortly.

I bought these off eBay for around $140 shipped, if i remember correctly.


Ended up trading them for oem paint matched flares with a local forum member who lives near me (Disturbed).


I ended up selling those oem paint matched flares and now I'm seriously regretting doing that. I'm currently looking for another set right now. If i cant find a set already painted PR4 Flame Red, then I'll just have to buy a brand new set and get them painted.

• 2012 Ram 1500 RCSB Hemi • 22" SRT-10 Wheels Plastidipped Black w/ Bridgestone Tires • Smoked Taillights • Custom Quad Headlights • Opt-7 FluxBeam-X 6000k LED Lows • MicTuning 6000k LED Fogs • K&N 63 Series CAI • Flowmasters Muffler • Line-X Bed • OEM Black Badges All Around • 20% Tint All Around • Lund Tri-Fold Tonneau + plenty more coming soon...

 

[ouff1968]

Just like the title says, I want to see what fender flares people are running.



I just leveled my 16 crew cab 1500 and added 20x9 +1 wheels and they stick out and inch or two.



First time driving in the rain and my once clean truck is coated down the side. I know this will happen regardless but I want to minimize it. Plus I want to remove the stock mudflap, but clearcoat damage has been done already.



Thought about color matched pocket style but I want to see what else people have. Will attach photos of my truck in shortly.

Sent from my iPhone using Tapatalk

 

[ouff1968]

Just like the title says, I want to see what fender flares people are running.



I just leveled my 16 crew cab 1500 and added 20x9 +1 wheels and they stick out and inch or two.



First time driving in the rain and my once clean truck is coated down the side. I know this will happen regardless but I want to minimize it. Plus I want to remove the stock mudflap, but clearcoat damage has been done already.



Thought about color matched pocket style but I want to see what else people have. Will attach photos of my truck in shortly.

Sent from my iPhone using Tapatalk

 

[ouff1968]

2014 RAM 2500 4wd
38"x13.50x20" Nitto Trail Grappler
20"x12" -44 offset Red Dirt Road
3" Leveling kit Performance Accessories
3" Body lift Performance Accessories
I had to trim front rocker and plastic a very small amount, to allow for full turn radius clearance.
I live on a dirt rd.
I have the largest flares available and I constantly have mud on my rig. The only thing I can do is go the slowest I can and wash it off asap! The rocks really fly also



Sent from my iPhone using Tapatalk

 

[The DodgeFather]

Sent from my iPhone using Tapatalk