Moe's 12 Second 1/4 Mile Incentive Program - $300 Gift Card

Discussion in 'Moe's Performance' started by Hemi450hp, Mar 4, 2015.

  1. Hemi450hp

    Hemi450hp Preferred Vendor

    Posts:
    9,162
    Likes Received:
    4,007
    Joined:
    Jul 17, 2012
    Location:
    Conroe, TX
    Ram Year:
    2011 Ram 1500
    Engine:
    5.7L Hemi
    OK guys, Moe's Performance and Hemifever Tuning have teamed up to create an incentive program to push everyone to continue making these trucks faster. We want to see numerous Hemi rams pushing that 12.99 mark without boost or nitrous. All you need to do is run a 12.99 or faster in the 1/4 mile, and Moe's Performance will send you a $300 Gift card to be used on anything in our online store, a Moe's Performance Cap and Decal, and a Hemifever Decal.. Below are the rules...

    1) You must be a current customer of Moe's Performance. It doesn't matter if you have only purchased a $30 thermostat or $5000 worth of parts.

    2) You must be running a Hemifever Custom Tune.

    3) Truck must be an 09-up Ram 1500 with no boost or nitrous. This program is designed to motivate everyone to push these Hemi motors into the 12's Naturally Aspirated.

    4) You must take a picture of your truck at the track to show the number written on your truck as well as a full picture of your timeslip.

    5) Each customer can only receive this incentive once. We are not going to give out 10 $300 gift cards to the same guy who makes 10 passes in 1 day :Big Laugh:

    This is a pretty simple program, and I hope we start to see more and more fast Hemi trucks at the track. We have already put quite a few 4th gens in the 12's, and are more than happy to help you all reach this goal. Don't hesitate to ask if you would like us to help you setup a 12 second beast. Let the race begin :driver:

    Winners:

    1. Matt - 2011 Regular Cab 2WD 5SP (11.99 @ 110.66MPH)
    2. Thad - 2014 Crew Cab 2WD 8SP (12.36 @ 107.51MPH)
    3. Matt - 2014 Regular Cab 2WD 8SP (12.38 @ 109.61MPH)
    4. Mark - 2014 Regular Cab 2WD 6SP (12.39 @ 108.04MPH)
    5. Henry A - 2014 Regular Cab R/T 8SP (12.56 @ 107.81MPH)
    6. Tate - 2013 Regular Cab 2WD 6SP (12.62 @ 104.11MPH)
    7. Wes - 2012 Regular Cab 2WD 6SP (12.65 @ 105.89MPH)
    8. Travis - 2013 Crew Cab 2WD 6SP (12.68 @ 105.44MPH)
    9. Wade - 2014 Regular Cab R/T 8SP (12.72 @ 104.59MPH)
    10. James S - 2013 Regular Cab 2WD 6SP (12.78 @ 104.04MPH)
    11. Paul - 2014 Regular Cab 2WD 6SP (12.85 @ 104.61MPH)
    12. James B - 2014 Quad Cab 2WD 6SP (12.86 @ 103.69MPH)
    13. Henry C - 2015 Regular Cab R/T 8SP (12.88 @ 106.55MPH)
    14. Robert - 2011 Quad Cab 2WD 5SP (12.94 @ 104.31MPH
     
    Last edited: May 1, 2017
  2. Dubstep Shep

    Dubstep Shep Senior Member

    Posts:
    2,235
    Likes Received:
    491
    Joined:
    Aug 4, 2014
    Location:
    Houston
    Ram Year:
    2014 R/T
    Engine:
    5.7L Hemi
    I might be interested in this one...

    From where I'm at, what would it take to get me to 12's?
     
  3. Hemi450hp

    Hemi450hp Preferred Vendor

    Posts:
    9,162
    Likes Received:
    4,007
    Joined:
    Jul 17, 2012
    Location:
    Conroe, TX
    Ram Year:
    2011 Ram 1500
    Engine:
    5.7L Hemi
    Wade, you should already be there with your mods. All you need are some drag radials/slicks, and I think you would be surprised with what you run.

    The only bolt on mods you don't have yet are Efan and underdrive Pulley. Do you have a cooler thermostat installed? I don't remember if you picked 1 of those up or not.
     
  4. fasthemiram12

    fasthemiram12 Senior Member

    Age:
    33
    Posts:
    789
    Likes Received:
    192
    Joined:
    Mar 11, 2013
    Ram Year:
    2012
    Engine:
    Eagle 5.7 vvt
    I think there should be a bounty on you Matt.
    Like an extra 500.00 for knocking you off the top spot.
     
    Paluby and wblv17 like this.
  5. Hemi450hp

    Hemi450hp Preferred Vendor

    Posts:
    9,162
    Likes Received:
    4,007
    Joined:
    Jul 17, 2012
    Location:
    Conroe, TX
    Ram Year:
    2011 Ram 1500
    Engine:
    5.7L Hemi
    Bring it on ;)
     
    Paluby likes this.
  6. Dubstep Shep

    Dubstep Shep Senior Member

    Posts:
    2,235
    Likes Received:
    491
    Joined:
    Aug 4, 2014
    Location:
    Houston
    Ram Year:
    2014 R/T
    Engine:
    5.7L Hemi
    The eFan I can't do since mine is a 14, but I can eliminate my clutched fan. And yes, I have a cooler thermostat.

    I ran a 13.9 before I had headers on the 22" SRT-10 wheels and tires. I was maxing out my torque converter when I launched and had zero issues hooking up.

    I'm probably going to be at RPR this Friday so we'll see what cooler weather does for me.
     
  7. Pull Ya

    Pull Ya Supporting Member

    Posts:
    4,408
    Likes Received:
    2,351
    Joined:
    Jan 16, 2012
    Location:
    Cedar Creek, Tx
    Ram Year:
    2016
    Engine:
    5.7 Hemi
    I think you'd have to buy all the bolt on's you currently sell before you could get into the 12's, so the only thing left to buy with the $300 is all the sparkly stuff to make your truck look purrdy! I'm doing my share though. LOL :roflsquared:
    Jay
     
  8. Dubstep Shep

    Dubstep Shep Senior Member

    Posts:
    2,235
    Likes Received:
    491
    Joined:
    Aug 4, 2014
    Location:
    Houston
    Ram Year:
    2014 R/T
    Engine:
    5.7L Hemi
    Actually, I don't know about this. I don't think RPR is open this Friday...
     
  9. tsheering88

    tsheering88 Junior Member

    Posts:
    3
    Likes Received:
    3
    Joined:
    Mar 6, 2015
    Location:
    Tomball,Tx
    Ram Year:
    2013 ram 1500 crew cab
    Engine:
    5.7l hemi
    Matt here is my slip n truck pic . Had to edit your truck outta my way! Lol
     

    Attached Files:

  10. kcsr

    kcsr Junior Member

    Posts:
    11
    Likes Received:
    0
    Joined:
    Nov 8, 2014
    Location:
    Kansas City MO
    Ram Year:
    2014 Ram 1500
    Engine:
    Hemi 5.7
    Great incentive program!

    Does it have to be a timeslip from a drag strip, or could I use the Trinity timer? Reason I'm asking is that all of the local drag strips have been shut down.
     

Share This Page