Need help asap!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

97RamSB

Senior Member
Joined
Jan 21, 2013
Posts
116
Reaction score
6
Ram Year
1997
Engine
5.9
Well 2 days ago my driver side A- arm broke. Came right off the frame while I was heading home.

Looks like they don't sell any replacement parts as it was part of the frame itself.

What do I do to fix this? Had a friend say he could weld it back on but it'll pull to the right all the time. (did it to one of his old hunting trucks) but the only problem he said besides it always wanting to yank to the right was it eats and I mean eats the driver side inside tire.

Any help is greatly appreciated as this is my daily
 

BAILEY1

Senior Member
Joined
Dec 21, 2012
Posts
4,906
Reaction score
502
Location
St Tammany Parish, LA.
Ram Year
2017 RAM 2500
Engine
Dat Cummins!
I would go and speak to a "high end" Bodyshop that has a frame machine. They would probably be able to weld it back on then tweak it with the machine to get it almost perfect.
 

mumbles84

Senior Member
Joined
Dec 26, 2012
Posts
108
Reaction score
2
Ram Year
1998
Engine
5.9 magnum
you can weld it on but lyou should set toe before welding then after have an allingment done how to set toe measure tire to tire. you might have to remove tie rod ends from them being damage
 
Top