Needing Help with Underdash Wiring

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Slowhand

Junior Member
Joined
May 15, 2017
Posts
27
Reaction score
10
Location
Charlotte, NC
Ram Year
1995
Engine
5.9
I had to replace the whole main-frame dash & top-dash cover, but it's taken me a few months to find the parts I needed to complete the job. So I've forgotten where some of the wiring goes.. I'm hoping someone can tell me where these wiring connections plugs in to. (95 Dodge Ram Sport, 5.9 without OB2 plug-in) Thank-you in advance...

View attachment 87711
 

Attachments

  • DSCF0294.jpg
    DSCF0294.jpg
    96.8 KB · Views: 39
  • DSCF0283 (2).jpg
    DSCF0283 (2).jpg
    96 KB · Views: 27
  • DSCF0303.jpg
    DSCF0303.jpg
    96.2 KB · Views: 33
  • DSCF0285.jpg
    DSCF0285.jpg
    99.7 KB · Views: 39

dudeman2009

Senior Member
Joined
Feb 9, 2016
Posts
1,562
Reaction score
208
Location
Arizona
Ram Year
2001 1500 Sport with enough electrical modifications to make my brain hurt
Engine
Magnum 360
Your best bet is to download your copy of the service manual and use the connector pinout/visual list in the wiring section to figure out what they all are. There is also a section that lists the locations of all the connectors and splices.

95 Service manual: https://1drv.ms/b/s!AivLG2b81LJSi-BaTv4TJIpILi17bg
 
OP
OP
Slowhand

Slowhand

Junior Member
Joined
May 15, 2017
Posts
27
Reaction score
10
Location
Charlotte, NC
Ram Year
1995
Engine
5.9
Thanks for the help Dudeman2009.. I'll definitely give it a try.
 
OP
OP
Slowhand

Slowhand

Junior Member
Joined
May 15, 2017
Posts
27
Reaction score
10
Location
Charlotte, NC
Ram Year
1995
Engine
5.9
So far, I have 3 of the 4 connections figured out. Because a '95 Ram doesn't have the OB2 plug-in, 2 of the connection are plug-in links to test the computer & the Air Bag/ABS safety features on the truck & the 3rd connection is used during assembly by the Dodge Plant. Each of the 3 connections have a common feature, they all have the push-in grommet attached to the connectors. So they can be attached to the steel bar behind the removable knee protector, under the steering column. (the push-in grommets holds them in place). Thanks again dudeman2009
 
Top