capt21
Junior Member
Please help. When i plug monitor such as edge insight or smarty touch, if left plugged into the odb2 plug this happens:
Clicking can be heard coming from four wheel motor
Four wheel indicator light shows vehicle in four wheel high, I have the knob selector
Vehicle is locked into four wheel high.
When the monitor is removed from the ODB2 plug, sometime cycling the ignition switch six or seven times the vehicle will remain in two wheel drive. Sometime it requires a hard reset of vehicle. I have replaced the ECM and four wheel drive motor.
Thanks for any help.
2004 3500 4X4 5.9 diesel dually
Banks cold air
Banks Monster Ram
Clicking can be heard coming from four wheel motor
Four wheel indicator light shows vehicle in four wheel high, I have the knob selector
Vehicle is locked into four wheel high.
When the monitor is removed from the ODB2 plug, sometime cycling the ignition switch six or seven times the vehicle will remain in two wheel drive. Sometime it requires a hard reset of vehicle. I have replaced the ECM and four wheel drive motor.
Thanks for any help.
2004 3500 4X4 5.9 diesel dually
Banks cold air
Banks Monster Ram