Dick87
Junior Member
Hey everyone,
I new here so here’s my rig:
1987 w100 w/NP435.
Original 318 block cracked.
Built a 96 magnum 5.2
Used engine quest heads with LA bolt pattern.
Edlebrock rpm intake.
650 thunder series carb.
Blah blah blah.....
So I removed the vacuum system and installed a posi-lock for my 4x4 engagement. But is there a way I can run my dash fan (defrost/heat) without the vacuum system?
My truck never had dash vents, only defrost. But without a vacuum system, none of it works. Lol
I new here so here’s my rig:
1987 w100 w/NP435.
Original 318 block cracked.
Built a 96 magnum 5.2
Used engine quest heads with LA bolt pattern.
Edlebrock rpm intake.
650 thunder series carb.
Blah blah blah.....
So I removed the vacuum system and installed a posi-lock for my 4x4 engagement. But is there a way I can run my dash fan (defrost/heat) without the vacuum system?
My truck never had dash vents, only defrost. But without a vacuum system, none of it works. Lol